Closed Zlyton closed 10 years ago
Is the web admin panel running?
IIRC it's on port 8080 without any ssl or password
On 11 May 2014, at 10:31, Zlyton notifications@github.com wrote:
Early all was fine. I wrote image (r8-A10) on SD-card, system started. SSH worked successfully. But after update something happend. And now I can't connect via SSH to my board. There are opened few ports (25 and 110) but 36000 (and 22 too) is closed. Rewriting image to SD card has no result. System is started as usualy (green led blinking) but I don't have a cable to connect a monitor. What may be wrong and how can I fix it?
— Reply to this email directly or view it on GitHubhttps://github.com/cubieplayer/Cubian/issues/302 .
From diapazone 21-23, 25, 53, 80, 110, 135, 137-139, 443, 445, 1080, 1433, 3128, 3306, 8000, 8080, 36000.opened only 25 and 110.
At the moment there is new clear image of Cubian (last revision)
If necessary I have USB-to-TTL adapter.
I'm not sure if the serial port is 5v or 3v TTL
Are you sure you can't find a HDMI monitor (or a HDMI -> DVI converter) and USB keyboard?
On 11 May 2014, at 10:39, Zlyton notifications@github.com wrote:
At the moment there is a new clear image of Cubian (last revision)
— Reply to this email directly or view it on GitHubhttps://github.com/cubieplayer/Cubian/issues/302#issuecomment-42766245 .
USB keyboard is not a problem. But I need few days to find HDMI monitor or hdmi-vga converter. What should I do when a monitor will be connected?
The behavior will be identical to a PC booting Linux. So you'd be presented regular boot messages, finally being given either a text mode login prompt, or some kind of desktop login (I always elect to install a text mode or server distro when I install Linux) If the SD card doesn't work you boot into android.
On 11 May 2014, at 10:53, Zlyton notifications@github.com wrote:
USB keyboard is not a problem. But I need few days to find HDMI monitor or hdmi-vga converter. What should I do when a monitor will be connected?
— Reply to this email directly or view it on GitHubhttps://github.com/cubieplayer/Cubian/issues/302#issuecomment-42766494 .
I so shamed but it was my f*****g firewall. It was turned off but with in some magic way it blocked my connection requests via SSH. Issue was false, sorry :)
Early all was fine. I wrote image (r8-A10) on SD-card, system started. SSH worked successfully. But after update something happend. And now I can't connect via SSH to my board. There are opened few ports (25 and 110) but 36000 (and 22 too) is closed. Rewriting image to SD card has no result. System is started as usualy (green led blinking) but I don't have a cable to connect a monitor. What may be wrong and how can I fix it?