Hey guys,
i tried to get some help in freenode but there is no-one who answers me :(
So i try it here:
at first i installed the X1 headless on my 32GB sd-card for cubieboard 2
i have an USB-TTL connected to Cubieboard to get some bootup and do the first-setup, but after a while it stoped the output.. so i logged in over ssh.
after an update and upgrade and an cubie-update process i want to mount my S-ATA hdd wich is prepared with 8 GB of swap (found as /dev/sda2 ) and an 290 GB partition of ext3(4) (testet both) after an swapon /dev/sda2 i got a swap with 1 GB (not my preconfigured 8 on that drive) and the other part. did not mounted due to some errors there where no journal (but there is one i got it on my windows PC with ext-driver support and also on my Ubuntu 14.04 and on xubuntu 14.04 with all the 290 GB
so i did an fsck /dev/sda1 to fix that, after that process i got an mountable partition with 36 GB but where are the other ~250GB ?
my next problem is that the mac of the CB on x1 is changing after rebootig my cb2 that is very bad for me because i can't put it like that into my home network wich has fixed IP adresses over dhcp handled by mac adresses and the filtering out of not allowed machines to get connection is to much to reconfigure after every reboot of the cb2 :(
so how can i fix that?
support over IRC would be nice on freenode #cubian it is easyer to communicate?
Hey guys, i tried to get some help in freenode but there is no-one who answers me :( So i try it here:
at first i installed the X1 headless on my 32GB sd-card for cubieboard 2
i have an USB-TTL connected to Cubieboard to get some bootup and do the first-setup, but after a while it stoped the output.. so i logged in over ssh. after an update and upgrade and an cubie-update process i want to mount my S-ATA hdd wich is prepared with 8 GB of swap (found as /dev/sda2 ) and an 290 GB partition of ext3(4) (testet both) after an swapon /dev/sda2 i got a swap with 1 GB (not my preconfigured 8 on that drive) and the other part. did not mounted due to some errors there where no journal (but there is one i got it on my windows PC with ext-driver support and also on my Ubuntu 14.04 and on xubuntu 14.04 with all the 290 GB so i did an fsck /dev/sda1 to fix that, after that process i got an mountable partition with 36 GB but where are the other ~250GB ?
my next problem is that the mac of the CB on x1 is changing after rebootig my cb2 that is very bad for me because i can't put it like that into my home network wich has fixed IP adresses over dhcp handled by mac adresses and the filtering out of not allowed machines to get connection is to much to reconfigure after every reboot of the cb2 :(
so how can i fix that?
support over IRC would be nice on freenode #cubian it is easyer to communicate?
greets