Open jarain78 opened 9 years ago
Yes, that is possible although it is nothing Cubian specific, see:
https://www.domotiga.nl/projects/domotiga/wiki/Hardware_Cubieboard2#Enabling-an-additional-UART
and the links given there.
Hi, thanks for your answer, but I have other question. The link that you give me is for A20, but I have the A10 cubieboard is the same process. This is my cubieboard.fex:
uart_port = 4
uart_type = 2
uart_tx = port:PH04<4><1>
[uart_para5]
uart_used = 0
uart_port = 5
uart_type = 2
uart_tx = port:PH06<4><1>
[uart_para6]
uart_used = 0
uart_port = 6
uart_type = 2
uart_tx = port:PA12<4><1>
But I can't find the pins PH06 and PH07.
http://abhinavgupta2812.files.wordpress.com/2013/08/gpio_defination_large.jpg
http://linux-sunxi.org/A10/PIO#PH06
And use this expansion board :
http://cubieboard.org/2013/11/30/dvk521-cubieboard12-baseboard-available-now/
Thank for your help.
jarain78
I think you are better off with this question at http://www.cubieforums.com/index.php/board,6.0.html
Hi, this is other questions. Is it posible to configure other UART-Port on cubieboard using cubian?.
Thanks
jarain78