Closed cunabula27 closed 5 years ago
All rotary potentiometers in the prototype boards have reversed polarity so output midi ID 127 at full left and midi ID 0 at full right.
Easily fixed in software using the Configurator and setting the control to Inverted but would be better to fix on the board.
Pin 3 is VCC and Pin 1 is GND on Alps RK09K/RK09D series potentiometers see https://docs-emea.rs-online.com/webdocs/0f4c/0900766b80f4c571.pdf
All rotary potentiometers in the prototype boards have reversed polarity so output midi ID 127 at full left and midi ID 0 at full right.
Easily fixed in software using the Configurator and setting the control to Inverted but would be better to fix on the board.