too low battery voltage displayed

cupidmoon / arducam-osd

Automatically exported from code.google.com/p/arducam-osd

0 stars 0 forks source link

too low battery voltage displayed #7

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago

What steps will reproduce the problem?
1. connect battery sensor
2. read APM planner voltage; in this case 11,7volts
3. observe that the reading is calibrated, real voltage is 11,7v
4. observe that OSD says "11.0V"

Original issue reported on code.google.com by andre.kj...@gmail.com on 9 Feb 2012 at 7:20

GoogleCodeExporter commented 9 years ago

Fixed in firmware 1.5

Original comment by andre.kj...@gmail.com on 10 Feb 2012 at 11:18

Added labels: ****
Removed labels: ****

GoogleCodeExporter commented 9 years ago

I'll handle this one.

Original comment by sbeni...@gmail.com on 11 Feb 2012 at 3:02

Changed state: Accepted
Added labels: ****
Removed labels: ****

GoogleCodeExporter commented 9 years ago

please notice that it's fixed in ver 1.5.

Original comment by andre.kj...@gmail.com on 11 Feb 2012 at 3:10

Added labels: ****
Removed labels: ****

GoogleCodeExporter commented 9 years ago

The change for this is done now.

Original comment by sbeni...@gmail.com on 11 Feb 2012 at 3:29

Changed state: Fixed
Added labels: ****
Removed labels: ****