Support for Wave 2nd Gen

[sverrham]

https://github.com/Airthings/wave-reader

They added support for a 2nd Gen device. Should be simple to update and support.

add this uuid: "b42e4dcc-ade7-11e4-89d3-123b93f75cba" And add a new decoder and decode as done in their code, it will be similar to the current Wave pluss decoder

[dajo]

@sverrham Is there a way to determine which gen you have?

[sverrham]

Serial nr 2900xxxxx is gen one, serial 2950xxxxx is gen two.

On Sat, Mar 14, 2020, 20:42 Jason Lachowsky notifications@github.com wrote:

@sverrham https://github.com/sverrham Is there a way to determine which gen you have?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/custom-components/sensor.airthings_wave/issues/23#issuecomment-599126301, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABDYNSNQOWQIROKK2W4OKIDRHPMY5ANCNFSM4KX3WUNQ .

[dajo]

Thanks. OT, but my SN is 29300xxxxx.

[sverrham]

From a quick google search that looks like the wave mini, are you sure you don't have a wave mini?

https://cdn2.hubspot.net/hubfs/4406702/Website/Manuals/Wave-Mini/airthings-wave-mini-manual.pdf

can see in the linked user manual 29300

On Sun, Mar 15, 2020 at 5:26 PM Jason Lachowsky notifications@github.com wrote:

Thanks. OT, but my SN is 29300xxxxx.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/custom-components/sensor.airthings_wave/issues/23#issuecomment-599232371, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABDYNSNO26FHRCG254XOBIDRHT6T3ANCNFSM4KX3WUNQ .

[rhgiter]

I have a airthings wave plus (model 2930) SN:2930xxxxx

how do I add this to my RP3+b I have installed HACS and this is in the config sensor:

• platform: airthings_wave scan_interval: 120

but iI don't see it in Known_devices or in HA ?

[MartyTremblay]

Welcome @rhgiter !

I'm going to state the obvious just because there's very little to go with.

• Have you looked at the logs?
• Devices (correction, Entities) will be named to something like sensor.98_07_xx_xx_xx_xx_radon_1day_avg
• These devices are Bluetooth LE (Low Energy) devices, their practical range between the device and the Pi is about 15 feet (line of sight).

[rhgiter]

Thanks I can see it now ,but all my entities writes available - ?

[image: image.png] /René

Den tor. 26. mar. 2020 kl. 13.33 skrev Martin Tremblay < notifications@github.com>:

Welcome @rhgiter https://github.com/rhgiter !

I'm going to state the obvious just because there's very little to go with.

• Have you looked at the logs?
• Devices will be named to something like sensor.98_07_xx_xx_xx_xx_radon_1day_avg
• These devices are Bluetooth LE (Low Energy) devices, their practical range between the device and the Pi is about 15 feet (line of sight).

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/custom-components/sensor.airthings_wave/issues/23#issuecomment-604404954, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOR4UGANNV63LE4NCOQRW3TRJNDQPANCNFSM4KX3WUNQ .

[dajo]

OT still, but @sverrham it looks like both of us have pluses with 2930xxxxx. I kinda gave up for now as I'm definitely further than the practical range and I don't really understand how to use pip with my HA setup.

[rhgiter]

i got mine to work. but the range from PI3b+ to wave is 5 mtr and it wont work ... when its 2,5 t will :-/