Cannot boot on stm32157 dk2

[nandra]

Hi I've build image using build.sh script, flash SD card and then I'me getting this:

NOTICE:  Model: STMicroelectronics STM32MP157C-DK2 Discovery Board
NOTICE:  Board: MB1272 Var2.0 Rev.C-01
NOTICE:  BL2: v2.4-r2.0(release):v2.4-stm32mp-r2
NOTICE:  BL2: Built : 09:13:36, Nov 19 2022
NOTICE:  BL2: Booting BL32
NOTICE:  SP_MIN: v2.4-r2.0(release):v2.4-stm32mp-r2
NOTICE:  SP_MIN: Built : 09:13:36, Nov 19 2022

U-Boot 2021.10 (Nov 19 2022 - 09:13:32 +0100)

CPU: STM32MP157CAC Rev.B
Model: STMicroelectronics STM32MP157C-DK2 Discovery Board
Board: stm32mp1 in trusted - stm32image mode (st,stm32mp157c-dk2)
Board: MB1272 Var2.0 Rev.C-01
DRAM:  512 MiB
Clocks:
- MPU : 650 MHz
- MCU : 208.878 MHz
- AXI : 266.500 MHz
- PER : 24 MHz
- DDR : 533 MHz
stpmic1_pmic stpmic@33: stpmic1_read: failed to read register 0x25 : -110stpmic1_pmic stpmic@33: stpmic0
WDT:   Started with servicing (32s timeout)
NAND:  0 MiB
MMC:   STM32 SD/MMC: 0
Loading Environment from MMC... stpmic1_pmic stpmic@33: stpmic1_read: failed to read register 0x23 : -10
stpmic1_pmic stpmic@33: stpmic1_read: failed to read register 0x23 : -110stpmic1_pmic stpmic@33: stpmic0
*** Warning - No block device, using default environment

In:    serial
Out:   serial
Err:   serial

Any ideas please or do you have some pre-build images I can try? Thanks.

[cvetaevvitaliy]

Hi! You can download sd image from my GitHub Actions

сб, 19 лист. 2022 р. о 19:09 Marek Belisko @.***> пише:

Hi I've build image using build.sh script, flash SD card and then I'me getting this:

NOTICE: Model: STMicroelectronics STM32MP157C-DK2 Discovery Board NOTICE: Board: MB1272 Var2.0 Rev.C-01 NOTICE: BL2: v2.4-r2.0(release):v2.4-stm32mp-r2 NOTICE: BL2: Built : 09:13:36, Nov 19 2022 NOTICE: BL2: Booting BL32 NOTICE: SP_MIN: v2.4-r2.0(release):v2.4-stm32mp-r2 NOTICE: SP_MIN: Built : 09:13:36, Nov 19 2022

U-Boot 2021.10 (Nov 19 2022 - 09:13:32 +0100)

CPU: STM32MP157CAC Rev.B Model: STMicroelectronics STM32MP157C-DK2 Discovery Board Board: stm32mp1 in trusted - stm32image mode (st,stm32mp157c-dk2) Board: MB1272 Var2.0 Rev.C-01 DRAM: 512 MiB Clocks:

• MPU : 650 MHz
• MCU : 208.878 MHz
• AXI : 266.500 MHz
• PER : 24 MHz
• DDR : 533 MHz stpmic1_pmic @.: stpmic1_read: failed to read register 0x25 : -110stpmic1_pmic @.: stpmic0 WDT: Started with servicing (32s timeout) NAND: 0 MiB MMC: STM32 SD/MMC: 0 Loading Environment from MMC... stpmic1_pmic @.: stpmic1_read: failed to read register 0x23 : -10 stpmic1_pmic @.: stpmic1_read: failed to read register 0x23 : -110stpmic1_pmic @.: stpmic0 Warning - No block device, using default environment

In: serial Out: serial Err: serial

Any ideas please or do you have some pre-build images I can try? Thanks.

— Reply to this email directly, view it on GitHub https://github.com/cvetaevvitaliy/stm32mp1-ubuntu/issues/7, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGJSSOC2X3WWWRDXJCCQE53WJECWDANCNFSM6AAAAAASFM7IMY . You are receiving this because you are subscribed to this thread.Message ID: @.***>