search

cwoodruf / EXTERNAL-uav-helicoptor-ece4007

Automatically exported from code.google.com/p/uav-helicoptor-ece4007
0 stars 0 forks source link

Look into brushless motors #4

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
We need 4 powerfull but cheap fanless motors.
Along with the motors , the fanless controllers will need to be picked.

Original issue reported on code.google.com by nosrak...@gmail.com on 17 Jan 2012 at 3:40

GoogleCodeExporter commented 9 years ago 
This is of assuming that we are going to scrap the helicopter and use a 
quadracopter.

Original comment by joey@jyore.com on 17 Jan 2012 at 3:42

GoogleCodeExporter commented 9 years ago 
Added Milestone

Original comment by joey@jyore.com on 17 Jan 2012 at 3:46

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
Think Karson meant brushless, not fanless...check lookout, I think they have 
some good ones

Original comment by joey@jyore.com on 17 Jan 2012 at 4:47

GoogleCodeExporter commented 9 years ago 
pololu, not lookout from comment above...was typing on phone and autocomplete 
got me...

Original comment by joey@jyore.com on 17 Jan 2012 at 8:16

GoogleCodeExporter commented 9 years ago 
Also, I'm sure senior design has motor bridges that we can use for driving the 
motors.  The BeagleBone has some PWM outputs, which will allow us to drive the 
motors with it.

I will lookup the part number for the motor bridges that I have used in the 
past that are inexpensive and easy to get setup.

Original comment by joey@jyore.com on 17 Jan 2012 at 8:19

GoogleCodeExporter commented 9 years ago 
I am going to look into brushless motor controllers for the report due Jan 25.

Original comment by andrew.r...@gmail.com on 18 Jan 2012 at 1:00

GoogleCodeExporter commented 9 years ago 
Closing since test motors have been ordered

Original comment by joey@jyore.com on 14 Feb 2012 at 3:39