cyberjunky / home-assistant-p2000

:fire_engine: This component tracks P2000 emergency events in The Netherlands.

MIT License

55 stars 9 forks source link

One of the sensors not working #78

Open ArnoS57 opened 1 year ago

ArnoS57 commented 1 year ago

Hi,

I installed HA on my NAS in a virtual machine. I have the P2000 component for HACS with this in het config.yaml

P2000 alarmeringen

sensor:

platform: p2000 name: Leiderdorp regios: 16 disciplines: Brandweerdiensten, Ambulancediensten radius: 3000 scan_interval: 10 icon: mdi:Alarm-Light latitude: 52.166949947438724 longitude: 4.533912356185198
platform: p2000 scan_interval: 10 name: Brw. Hollands Midden capcodes: 1503900 icon: mdi:fire-truck nolocation: true

The first sensor Leiderdorp doesn't show any messages, while the second (Brw. Hollands Midden) does show them.

What could be wrong? Please help.

cyberjunky commented 1 year ago

The fetched data for regio 16 problably doesn't contain any lat/long information, this is often missing from the feed. You might want to run your own RTL-SDR setup using a simple dongle, i'm releasing a Home Assistant Add-on for this soon, currently in testing phase... that setup is dead easy...

ArnoS57 commented 1 year ago

Hi Ron,

Top, thx for the answer. I have such a dongle from a former aircraft reciever, so I’ll try that option when released.

Op ma 8 mei 2023 om 10:50 schreef Ron @.***>

The fetched data for regio 16 problably doesn't contain any lat/long information, this is often missing from the feed. You might want to run your own RTL-SDR setup using a simple dongle, i'm releasing a Home Assistant Add-on for this soon, currently in testing phase... that setup is dead easy...

— Reply to this email directly, view it on GitHub https://github.com/cyberjunky/home-assistant-p2000/issues/78#issuecomment-1537991079, or unsubscribe https://github.com/notifications/unsubscribe-auth/AU63RZB5LUQYJREBT6HHIZTXFCXUJANCNFSM6AAAAAAXZPV7DA . You are receiving this because you authored the thread.Message ID: @.***>

-- Met vriendelijke groet, Arno Sormani Verzonden via mijn Ipad/Iphone

williamabbo commented 1 year ago

The fetched data for regio 16 problably doesn't contain any lat/long information, this is often missing from the feed. You might want to run your own RTL-SDR setup using a simple dongle, i'm releasing a Home Assistant Add-on for this soon, currently in testing phase... that setup is dead easy...

cyberjunky please keep me informed about this new Add-on, I would like to run this with my own RTL receiver.