1m3 3d printer

[MrGreenball]

• [x] Parts Required
• [x] Assembly
• [ ] Firmware
• [ ] Сalibration
• [ ] Printing

[mastercyb]

Waiting components.. Which one?

[MrGreenball]

Parts Required

Frame and portals

We will need a v-slot aluminum profile.

To assemble the frame:

• 2020 v-slot 1100 mm -8 pct
• 2040 v-slot 1200 mm - 4 pcs.

To build the XYZ portal:

• 2020 v-slot 1100 mm - 2 pct
• 2040 v-slot 1100 mm - 2 pct

• 2040 v-slot 1200 mm - 2 pct.

  To connect Profile used T-nut.

To strengthen the frame I use aluminum plates at each corner.

For movement I use the OpenBuilds technology.

• V-wheel 24mm - 28 pct

• Spacers 6mm - 14 pct

• eccentric 6mm - 14 pct

  Portal plates and motor mounts are printed on a 3D printer.

• 05_Y axis - 2 pct

  Electronics

  Power - network dc Mainboard - BigTreeTech Skr V1.3 SensoryTFT35 V2.0 BigTreeTech Stepper driver - LV8729 - 5 pct (1 safe) Motor - Nema 17 - 4 pct Limit switch - No-name - 3 pct Hot end Termistor Silicon hot bed Wire Connectors

[MrGreenball]

Assembly

I have not chosen the optimal assembly path. Frame - Y axis - X axis - Z axis - Motor - Wire - Motherboard - Dc

Assembled a frame from an aluminum profile.

[MrGreenball]

Firmware

I use the firmware Marlin 2.0.x alpha. http://marlinfw.org/ For installation on a board I use PlatformIO. (instructions from the board manufacturer) Using kinematics Core XY