Open dschier opened 3 years ago
The newest UAT radio has a red PCB and is a little larger than the previous. If you don’t have it, you owe it to yourself to get it. Much more sensitive for towers in my area.
On Sat, Aug 29, 2020 at 10:15 AM dschier notifications@github.com wrote:
1.
Stratux version:
2.
Stratux config:
SDR
- single - dual
GPS
- yes - no type:
AHRS
- yes - no
power source:
usb cable:
3.
EFB app and version: (Foreflight)
EFB platform: (iOS 13.6)
EFB hardware: (new iPad 128GB Cellular)
4.
Description of your issue: I have two homemade J-Pole antennas mounted in the nose of my Cozy IV. I recently got a NanoVNA and I would like to tune the antennas for 978 and 1090 but I do not know how to tell which Stratux receiver is which. There must be an easy way to tell. Thanks
If possible, enable "Replay Logs", reproduce the problem, and provide a copy of the logs in http://192.168.10.1/logs/stratux/ and http://192.168.10.1/logs/stratux.log.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/cyoung/stratux/issues/819, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJII6MYWCEEYOEXEXTNQTPDSDEERBANCNFSM4QPAQ2TQ .
Hi WA9ALS, K1UHF here. I just checked one of the PCB's in my airplane's Stratux and it is no red, but tan. Now I have to find red board ones. Thanks, 73
I was just testing my ADS-B in J-Pole antennas that I made with a nanoVNA, great device. They tested < 2:1 VSWR so I put the covers back on the plane; doubt I would notice the difference on towers received if I tuned them better
.
I got new Nooelec NESDR SMArt in aluminum cases. My old ones were blue plastic with tan PCBs. I hope these are better, if I get a chance to fly with them and they don’t seem to work better Amazon will take them back.
73
Del, K1UHF
Cozy IV N197DL
From: wa9als notifications@github.com Sent: Saturday, August 29, 2020 10:40 AM To: cyoung/stratux stratux@noreply.github.com Cc: dschier delsjunk@snet.net; Author author@noreply.github.com Subject: Re: [cyoung/stratux] Which receiver is which (#819)
The newest UAT radio has a red PCB and is a little larger than the previous. If you don’t have it, you owe it to yourself to get it. Much more sensitive for towers in my area.
On Sat, Aug 29, 2020 at 10:15 AM dschier <notifications@github.com mailto:notifications@github.com > wrote:
1.
Stratux version:
2.
Stratux config:
SDR
single
dual
GPS
yes
no
type:
AHRS
yes
no
power source:
usb cable:
3.
EFB app and version: (Foreflight)
EFB platform: (iOS 13.6)
EFB hardware: (new iPad 128GB Cellular)
4.
Description of your issue: I have two homemade J-Pole antennas mounted in the nose of my Cozy IV. I recently got a NanoVNA and I would like to tune the antennas for 978 and 1090 but I do not know how to tell which Stratux receiver is which. There must be an easy way to tell. Thanks
If possible, enable "Replay Logs", reproduce the problem, and provide a copy of the logs in http://192.168.10.1/logs/stratux/ and http://192.168.10.1/logs/stratux.log.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/cyoung/stratux/issues/819, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJII6MYWCEEYOEXEXTNQTPDSDEERBANCNFSM4QPAQ2TQ .
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/cyoung/stratux/issues/819#issuecomment-683299647 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AF62TN3M6S5F6347ED4LQS3SDEHK7ANCNFSM4QPAQ2TQ . https://github.com/notifications/beacon/AF62TN2TS374YUQRL7Q4VQLSDEHK7A5CNFSM4QPAQ2T2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOFC5FGPY.gif
Stratux version:
Stratux config:
SDR
GPS
AHRS
power source:
usb cable:
EFB app and version: (Foreflight)
EFB platform: (iOS 13.6)
EFB hardware: (new iPad 128GB Cellular)
Description of your issue: I have two homemade J-Pole antennas mounted in the nose of my Cozy IV. I recently got a NanoVNA and I would like to tune the antennas for 978 and 1090 but I do not know how to tell which Stratux receiver is which. There must be an easy way to tell. Thanks
If possible, enable "Replay Logs", reproduce the problem, and provide a copy of the logs in http://192.168.10.1/logs/stratux/ and http://192.168.10.1/logs/stratux.log.