Inconsistent serial port output. /dev/serialout0 not always created by udev rules.
Force udev rules to always assign the tagged serial device to serial port 0.
I have found that using %n is a problem. The USB serial card shows up
on different USB devices (i.e. /dev/USB1) which causes the serial port
to be on the wrong device (i.e. /dev/serialout1).
Since statux is only supporting a single serial out at this time this
seems like a reasonable change.
Inconsistent serial port output. /dev/serialout0 not always created by udev rules. Force udev rules to always assign the tagged serial device to serial port 0. I have found that using %n is a problem. The USB serial card shows up on different USB devices (i.e. /dev/USB1) which causes the serial port to be on the wrong device (i.e. /dev/serialout1). Since statux is only supporting a single serial out at this time this seems like a reasonable change.
SUBSYSTEMS=="usb", ATTRS{interface}=="Stratux Serialout", SYMLINK+="serialout0"
This change on mine has fixed the serialport output issue