search

cyoung / stratux

Aviation weather and traffic receiver based on RTL-SDR.
BSD 3-Clause "New" or "Revised" License
1.07k stars 365 forks source link

there is a problem is not small #847

Open JoAnyad opened 2 years ago

JoAnyad commented 2 years ago

  1. Stratux version:eu27

  2. Stratux config: 978 and 1090 RTL-SDR YES GPS NO 978 Mhz (UAT) YES 1090 Mhz (ADS-B/Mode-S ES) YES 868 Mhz (OGN) NO 162 MHz (AIS) YES AHRS Sensor YES Baro Sensor

    SDR

    • x ] single
    • [ ] dual

    GPS

    • [x ] yes
    • [ ] no type:

    AHRS

    • [x ] yes
    • [ ] no

    power source:

    usb cable:

  3. EFB app and version: (e.g., WingX Pro7 8.6.2)

    EFB platform: (e.g., iOS 9.2)

    EFB hardware: (e.g., iPad Mini 2)

  4. Description of your issue:

  5. has two SDRs. a 1090 and 978.

  6. I start the OGN turns off the GPS usb serial and when the 1090ES is turned on there is no OGN data sending

  7. disconnect from GPS i have been fighting like a pig on the ice for three months but i am very bored with this shit. If something is going to be good like WIFI then something is quite xar. the latest version of eu027 is above and the T-BEAM esp32-ogn-tracker-bin-10 + I flashed everything 2000x DE fos. Can someone tell me what's wrong? Or fuck me up? stratux.log.txt stratux_foto

If possible, enable "Replay Logs", reproduce the problem, and provide a copy of the logs in http://192.168.10.1/logs/stratux/ and http://192.168.10.1/logs/stratux.log.

b3nn0 commented 2 years ago

Almost certainly power delivery issue.

Try a different USB power supply and a different cable. See also: https://github.com/b3nn0/stratux/discussions/137

JoAnyad commented 2 years ago

Thanks for the quick response. The PI LED is flashing red, and now both LEDs are flashing continuously. I replaced the power supply (so far 1A) with 2A and the USB cable between PI and TTGO. There is improvement. In the settings, if I enable (turn on) 1090 Mhz (ADS-B / Mode-S ES), the OGN switches to disconnect on the status page. If I turn on anything (UAT, OGN, AIS, AHRS, BARO) then the OGN works flawlessly, but if I turn on 1090 Mhz (ADS-B / Mode-S ES) it is disconected. For example, when switching (978 Mhz (UAT)) it is disconnected for one second, then the OGN switches back on properly. I'm showing you the pictures. First image: Fully on all except 1090. Second: the 1090 is also turned on full1 only1

b3nn0 commented 2 years ago

If the red LED is not constantly on, there is not enough power. So that's always the first thing to make sure. I think there is a conflict in the configuration of your SDRs. I.e. Stratux wants to use both for the same protocol, which doesn't work. Can you post a log file? And again: which SDR model are you using?

JoAnyad commented 2 years ago

The LEDs are constantly lit. GPS connection is stable :-) I am attaching the stratux.log file. I hope you thought so because you're a bunch of it :-) I'm attaching RTL-SDR pictures, I don't know which one. 20211230_172241 20211230_172324 20211230_172328 20211230_172436 20211230_172441 20211230_172503 20211230_172516 20211230_172624 20211230_172641 20211230_172714

b3nn0 commented 2 years ago

That explains it. The red one is the Stratux UAT radio and not an SDR. It can only be used for UAT. For OGN-RX you will need a second RTLSDR (e.g. nooelec nano 2+). Edit: or do you just want to transmit OGN (with limited rx capability, see wiki)? Then you can leave that OGN setting disabled. The TBeam does that independently.

JoAnyad commented 2 years ago

Thanks again for the help! I ordered NooElec NESDR Nano 2+. He will arrive on Jan. 11. I hope this will be good. I am submitting the Stratux.log file because it was left behind yesterday. stratux.log.txt Would you like to see if there is any other problem? Happy New Year!