Pentium J3710 on ASRock J3710-ITX

[ich777]

lscpu.txt lspci.txt motherboard.txt

dmidecode -t memory:

Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.

Handle 0x000B, DMI type 16, 23 bytes
Physical Memory Array
        Location: System Board Or Motherboard
        Use: System Memory
        Error Correction Type: None
        Maximum Capacity: 8 GB
        Error Information Handle: Not Provided
        Number Of Devices: 2

Handle 0x000D, DMI type 17, 40 bytes
Memory Device
        Array Handle: 0x000B
        Error Information Handle: Not Provided
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 8 GB
        Form Factor: DIMM
        Set: None
        Locator: A1_DIMM0
        Bank Locator: A1_BANK0
        Type: DDR3
        Type Detail: Unknown
        Speed: 1600 MT/s
        Manufacturer: Kingston        
        Serial Number: 13062223  
        Asset Tag: A1_AssetTagNum0
        Part Number: 99U5428-018.A00LF 
        Rank: 2
        Configured Memory Speed: 1600 MT/s
        Minimum Voltage: 1.35 V
        Maximum Voltage: 1.5 V
        Configured Voltage: 1.35 V

Handle 0x000F, DMI type 17, 40 bytes
Memory Device
        Array Handle: 0x000B
        Error Information Handle: Not Provided
        Total Width: Unknown
        Data Width: 64 bits
        Size: No Module Installed
        Form Factor: DIMM
        Set: None
        Locator: A1_DIMM1
        Bank Locator: A1_BANK1
        Type: Unknown
        Type Detail: Unknown
        Speed: Unknown
        Manufacturer: A1_Manufacturer1
        Serial Number: A1_SerNum1
        Asset Tag: A1_AssetTagNum1
        Part Number: Array1_PartNumber1
        Rank: Unknown
        Configured Memory Speed: Unknown
        Minimum Voltage: Unknown
        Maximum Voltage: Unknown
        Configured Voltage: Unknown```

[cyring]

Thank you.

CoreFreq enhancements here are:

• IMC decoder
• Uncore counter
• Turbo boost not capable ark

[cyring]

Vcore

• Stressing a single or all Core(s), voltage should fall within this range:
• CoreFreq integrated stress tool can help to verify if its formula is well calibrated ? If not, please let me know about your lowest and highest values.

  Power and TjMax

• TDP is expected to be at most 6W and Thermal junction at 90°C

• Values should match in the window "Power, Current & Thermal" ( or press shortcut [w] )

  EDIT: and probably a bit more! according to errata of D1 stepping

[cyring]

Changes have been brought regarding https://github.com/cyring/CoreFreq/issues/259#issuecomment-864608848 Feel free to come back when you have a chance to try the latest development version.