czg1997 / dslrdashboard

Automatically exported from code.google.com/p/dslrdashboard
0 stars 0 forks source link

Got Error 70 in Canon 650D Rebil T4i #269

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
What steps will reproduce the problem?
1. Turn on 
2. When I went to the LCD display mode to view the image to take snap. It 
throws Err 70.
3. Turn off and on again or remove and reset the battery. Tried but still got 
the same error 70

What is the expected output? What do you see instead?
It should display the image field. But it displays the Error 70.

What version of the product are you using? On what operating system?
Canon 650D Rebel T4i.

Please provide any additional information below.
I was taking photographs on a Lazer show, suddenly this error occured and 
unable to take snaps further. As I see some instructions in forum I tried to 
clear the S2 and S3 video settings. I don't know how to clear that. Please Help.

Original issue reported on code.google.com by itsmeedi...@gmail.com on 3 Jun 2014 at 2:55

GoogleCodeExporter commented 8 years ago
Same issue here
Err 70 no matter what I do
Reset to default settings
Enabled pictures without card
Tried Magic Lantern settings changes
QDSLR Dashboard - changed all the file types

Nothing works
This is some trash programming on Canons part
Canon's error codes do not line up with reality

If anyone knows either how to truly factory reset the t4i to factory defaults 
or has access to white paper level data I can at least try to interpret the 
laundry list of error codes in my debug files or flat out reset this door stop 
before I give in and spend $$$$ on a 70D

Not happy

Original comment by jyoaku...@gmail.com on 4 Jul 2014 at 2:54

GoogleCodeExporter commented 8 years ago
As far I know the Err 70 will popup if there is some image format problem on 
camera. I also have a 650D here but never had that problem. But I also read 
somewhere that it could be related to sdcard issues.

Original comment by hub...@gmail.com on 4 Jul 2014 at 3:19

GoogleCodeExporter commented 8 years ago
http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011
&PARTITION_ID=1&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=53051

Original comment by hub...@gmail.com on 4 Jul 2014 at 3:20

GoogleCodeExporter commented 8 years ago
Yes I tried to change the display settings and the S1 and S2 image settings. No 
options available to change the image settings. I tried removing and re seating 
the SD card still remains the same. Error message popsup even without SD card. 
I contacted Canon Service Centre they diagnosed and said the CMOS Sensor went 
bad and need to be replaced. It will cost Rs. 19000 + tax. I Don't know what to 
do. It was purchased in Canada and that warrant won't work here.

Original comment by itsmeedi...@gmail.com on 4 Jul 2014 at 4:40

GoogleCodeExporter commented 8 years ago
Really NOT HAPPY with 650D.

Original comment by itsmeedi...@gmail.com on 4 Jul 2014 at 4:43

GoogleCodeExporter commented 8 years ago
Hii there if you are getting error 70 on the canon camera then may be it is 
because of the memory card issue and any other reason. In the process of fixing 
it you can lose your favourite images. You can restore them by using any backup 
or you can use a recovery tool that can automatically remove it. To know more 
about it you can visit : 
http://www.getphotoback.com/error-code-70-on-a-canon-7d-get-corrupted-deleted-lo
st-photo-recovered

Original comment by samuelma...@gmail.com on 22 Jul 2015 at 12:06