Generated 1234 MB ISO appears to be faulty

[GoogleCodeExporter]

I don't know why, but the 1234 MB ISO generated by pd_setup is faulty and 
creates error on boot
http://omploader.org/vMzR2dw

However, if one uses HD Utility to restore the same ISO to a USB drive and then 
installs the 
bootloader, the resulting system boots fine on real HW.

Don't know what's going on. 

Original issue reported on code.google.com by appeng...@puredarwin.org on 3 Jan 2010 at 12:30

[GoogleCodeExporter]

It boots via a read-only medium which results in producing these verbose 
messages  (e.g., "device is write 
locked").
Consequently I don't see anything faulty, maybe not expected. Which command 
line did you use to produce the 
iso, what are you using to boot it and how? 

Original comment by Aladin.Q...@gmail.com on 3 Jan 2010 at 11:43

[GoogleCodeExporter]

Ah, are you saying a non-nano PD can't boot into multiuser mode (yet, since 
we're not using ramdisks)? That 
would make sense... 

Original comment by appeng...@puredarwin.org on 3 Jan 2010 at 11:56

[GoogleCodeExporter]

If you boot on "read-only", no way without a ramdisk for login (many daemons 
have no problem though, 
including launchd).

Original comment by Aladin.Q...@gmail.com on 4 Jan 2010 at 12:03