search

dadisigursveinn / 400plus

Automatically exported from code.google.com/p/400plus
0 stars 0 forks source link

Change the self-timer value #353

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
Congratulations everybody for this so useful project.

I wonder if will it possible to change the value of the seconds of the 
self-timer. It's always 10 seconds. I would like to choose between 0 and 10 
seconds, for example.

I take photos with a cable remote shutter. I always use AEB. Choosing the 
self-timer option, pressing once the shutter the camera take 3 photos. But I 
have to wait 10 seconds. I would like wait 0 seconds.

(I opened a new theme in 400plus google group, but I think here it's the 
correct place ).

Thanks,
Roberto Sanz

Original issue reported on code.google.com by robertius on 27 Nov 2014 at 8:41

GoogleCodeExporter commented 9 years ago 
[I just approved your message to the discussion group; we had to implement a 
filter to new users, to avoid spam]

As far as I know, the duration of the self-timer is not configurable, even 
using internal routines; I am afraid that we just do not know how to do that. 
However, remember that you can enable the MLU option on the camera, and then 
the self-timer is reduced to 3 seconds; perhaps that is an acceptable solution.

Original comment by eduardo....@gmail.com on 27 Nov 2014 at 3:32

GoogleCodeExporter commented 9 years ago 
Ok.

The MLU option doesn't work for me. I need with a single shoot the camera take 
3 photos. Using cable remote shutter and AEB the camera works that way. With 
MLU option activated it doesn't.

Thanks anyway.
Best regards.

Roberto Sanz

Original comment by robertius on 28 Nov 2014 at 10:49

GoogleCodeExporter commented 9 years ago 
You can also use the EAEB script; you lose the option of using a cable, but you 
can configure a delay, and let the camera stabilize. Unless someone figures out 
how to configure the self-timer delay, I think these are your only options.

Original comment by eduardo....@gmail.com on 2 Dec 2014 at 9:23

GoogleCodeExporter commented 9 years ago 
Yes, I tried that and works fine. But I need shooting with cable because the 
shootings are controlled by another device.
With the IR remote controller works perfect, with a single shot the camera 
takes 3 photos without delay.
So I'm working in an IR controller attached to the camera and controled with 
cable.

Thanks.

Original comment by robertius on 2 Dec 2014 at 3:25

GoogleCodeExporter commented 9 years ago 
We are moving to GitHub, please follow this issue at 
https://github.com/400plus/400plus/issues/353

Original comment by eduardo....@gmail.com on 16 Mar 2015 at 1:17