search

dagnall53 / RocClientThrottle

A WiFi Rocrail Client throttle
4 stars 5 forks source link

Error Verify RCT ver 007 #2

Closed mathjo closed 5 years ago

mathjo commented 5 years ago

Hi,

I saw the latest version 007. Verify gives only one error:

General: Arduino: 1.8.8 (Windows Store 1.8.19.0) (Windows 10), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Enabled, 4M (no SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 115200"

compilation terminated.

exit status 1 Error compiling for board NodeMCU 1.0 (ESP-12E Module).

I don’t know how to resolve. Thks for your respons.

Mathjo

dagnall53 commented 5 years ago

Have you got the pubsubclient library installed? And also Its very important to increase the size that the MQTT interface can use: see the comment in read.me

mathjo commented 5 years ago

Idd the pubsubnet library wasn't installed. No errors anymore, thanks for the support.

PS The MQTT size is increased.

Marcel

Op vr 28 dec. 2018 om 21:06 schreef dagnall notifications@github.com:

Have you got the pubsubclient library installed? And also Its very important to increase the size that the MQTT interface can use: see the comment in read.me

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/dagnall53/RocClientThrottle/issues/2#issuecomment-450419430, or mute the thread https://github.com/notifications/unsubscribe-auth/AsFBaxuy2MsrswQqtis3_0dEOaiFIbYwks5u9nnigaJpZM4ZkLMM .

dagnall53 commented 5 years ago

Cheers, Glad it works. There is a very small bug related to the lights showing off on the throttle sometimes when the loco lights are actually on, but I hope to find it soon.