[X] I have enabled debug logging for my installation.
[X] I have filled out the issue template to the best of my ability.
[X] This issue only contains 1 issue (if you have multiple issues, open one issue for each issue).
[X] This issue is not a duplicate issue of currently previous issues..
Describe the issue
My SYSTXCCWIC01 unit is set to CELSIUS degrees and with local control (or remotely with Carrier Home) it works as it should - minimum and maximum setpoint values correspond to Celsius degrees i.e. 10-30°C. However, if I set the setpoint via this integration in HA I have the minimum value set to 50° (which would correspond to F).
I have attributes:
min_temp: 50
max_temp: 90
current_temperature: 24 (it is correct)
temperature: null
target_temp_high: null
target_temp_low: null
System Health details
SYSTXCCWIC01-B, HA in latest version.
Checklist
Describe the issue
My SYSTXCCWIC01 unit is set to CELSIUS degrees and with local control (or remotely with Carrier Home) it works as it should - minimum and maximum setpoint values correspond to Celsius degrees i.e. 10-30°C. However, if I set the setpoint via this integration in HA I have the minimum value set to 50° (which would correspond to F). I have attributes: min_temp: 50 max_temp: 90 current_temperature: 24 (it is correct) temperature: null target_temp_high: null target_temp_low: null
Reproduction steps
...
Debug logs
Diagnostics dump
No response