search

daid / LegacyCura

Read this, it's important! NEW CURA DEVELOPMENT IS HAPPENING AT https://github.com/Ultimaker/Cura, this is the Cura 15.04 archive. Cura 2.1 and newer is on the Ultimaker github.
https://www.ultimaker.com/pages/our-software
584 stars 429 forks source link

Wrong number of arguments for OnHeatRun in First Run Wizard #23

Closed ken-trent closed 12 years ago

ken-trent commented 12 years ago

Thanks for great software! I'm new to my Ultimaker and excited to try using SkeinPyPy. It looks so much easier than Skeinforge.

Running Beta4 I got an error message from the first run wizard that my heater and temp senser are not working. I know they are working from using ReplicatorG. The DOS box log shows the error message is likely a result of wrong number of arguments to OnHeatRun. The log shows me using the wizard to update my firmware to the recommended version.

TypeError: OnHeatRun() takes exactly 2 arguments (1 given)

Thanks, Ken

wizardDone not found in preferences, so using default: False filament_diameter not found in profile, so using default: 2.89 steps_per_e not found in preferences, so using default: 865.888 Flashing 46952 bytes Verifying 46952 bytes Recv: start Recv: echo: External Reset Recv: Marlin: 1.0.0 RC2 Recv: echo: Last Updated: Marlin-Mon, 5 Mar 2012 09:56:50 -0800 - f3095493b06d52 a33ae77a0b8c1f92a22633261a | Author: Build-Me-Marlin Recv: echo: Free Memory: 5631 PlannerBufferBytes: 1232 Recv: echo:Using Default settings: Recv: echo:Steps per unit: Recv: echo: M92 X78.74 Y78.74 Z533.33 E865.89 Recv: echo:Maximum feedrates (mm/s): Recv: echo: M203 X250.00 Y250.00 Z5.00 E45.00 Recv: echo:Maximum Acceleration (mm/s2): Recv: echo: M201 X9000 Y9000 Z100 E10000 Recv: echo:Acceleration: S=acceleration, T=retract acceleration Recv: echo: M204 S3000.00 T3000.00 Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/ s), B=minimum segment time (ms), X=maximum xY jerk (mm/s), Z=maximum Z jerk (mm /s) Recv: echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00 Recv: echo:PID settings: Recv: echo: M301 P22.20 I1.25 D99.00 Recv: ok Recv: ok T:114.75 B:0.00 @:0 Recv: ok Recv: ok T:110.17 B:0.00 @:0 Recv: ok Exception in thread Thread-9: Traceback (most recent call last): File "C:\Users\Lenae\Desktop\Ultimaker\SkeinPyPy\python\lib\threading.py", lin e 552, in bootstrap_inner self.run() File "C:\Users\Lenae\Desktop\Ultimaker\SkeinPyPy\python\lib\threading.py", lin e 505, in run self.__target(_self.args, *_self.__kwargs) TypeError: OnHeatRun() takes exactly 2 arguments (1 given)

Recv: start Recv: echo: External Reset Recv: Marlin: 1.0.0 RC2 Recv: echo: Last Updated: Marlin-Mon, 5 Mar 2012 09:56:50 -0800 - f3095493b06d52 a33ae77a0b8c1f92a22633261a | Author: Build-Me-Marlin Recv: echo: Free Memory: 5631 PlannerBufferBytes: 1232 Recv: echo:Using Default settings: Recv: echo:Steps per unit: Recv: echo: M92 X78.74 Y78.74 Z533.33 E865.89 Recv: echo:Maximum feedrates (mm/s): Recv: echo: M203 X250.00 Y250.00 Z5.00 E45.00 Recv: echo:Maximum Acceleration (mm/s2): Recv: echo: M201 X9000 Y9000 Z100 E10000 Recv: echo:Acceleration: S=acceleration, T=retract acceleration Recv: echo: M204 S3000.00 T3000.00 Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/ s), B=minimum segment time (ms), X=maximum xY jerk (mm/s), Z=maximum Z jerk (mm /s) Recv: echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00 Recv: echo:PID settings: Recv: echo: M301 P22.20 I1.25 D99.00 Recv: Recv: ok Recv: ok Recv: ok Recv: start Recv: echo: External Reset Recv: Marlin: 1.0.0 RC2 Recv: echo: Last Updated: Marlin-Mon, 5 Mar 2012 09:56:50 -0800 - f3095493b06d52 a33ae77a0b8c1f92a22633261a | Author: Build-Me-Marlin Recv: echo: Free Memory: 5631 PlannerBufferBytes: 1232 Recv: echo:Using Default settings: Recv: echo:Steps per unit: Recv: echo: M92 X78.74 Y78.74 Z533.33 E865.89 Recv: echo:Maximum feedrates (mm/s): Recv: echo: M203 X250.00 Y250.00 Z5.00 E45.00 Recv: echo:Maximum Acceleration (mm/s2): Recv: echo: M201 X9000 Y9000 Z100 E10000 Recv: echo:Acceleration: S=acceleration, T=retract acceleration Recv: echo: M204 S3000.00 T3000.00 Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/ s), B=minimum segment time (ms), X=maximum xY jerk (mm/s), Z=maximum Z jerk (mm /s) Recv: echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00 Recv: echo:PID settings: Recv: echo: M301 P22.20 I1.25 D99.00 Recv: ok Recv: ok Recv: ok Recv: ok Recv: start Recv: echo: External Reset Recv: Marlin: 1.0.0 RC2 Recv: echo: Last Updated: Marlin-Mon, 5 Mar 2012 09:56:50 -0800 - f3095493b06d52 a33ae77a0b8c1f92a22633261a | Author: Build-Me-Marlin Recv: echo: Free Memory: 5631 PlannerBufferBytes: 1232 Recv: echo:Using Default settings: Recv: echo:Steps per unit: Recv: echo: M92 X78.74 Y78.74 Z533.33 E865.89 Recv: echo:Maximum feedrates (mm/s): Recv: echo: M203 X250.00 Y250.00 Z5.00 E45.00 Recv: echo:Maximum Acceleration (mm/s2): Recv: echo: M201 X9000 Y9000 Z100 E10000 Recv: echo:Acceleration: S=acceleration, T=retract acceleration Recv: echo: M204 S3000.00 T3000.00 Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/ s), B=minimum segment time (ms), X=maximum xY jerk (mm/s), Z=maximum Z jerk (mm /s) Recv: echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00 Recv: echo:PID settings: Recv: echo: M301 P22.20 I1.25 D99.00 Recv: ok Recv: ok Recv: ok Recv: ok lastFile not found in preferences, so using default: None layer_height not found in profile, so using default: 0.2 wall_thickness not found in profile, so using default: 0.8 solid_layer_thickness not found in profile, so using default: 0.6 fill_density not found in profile, so using default: 20 skirt_line_count not found in profile, so using default: 1 skirt_gap not found in profile, so using default: 6.0 print_speed not found in profile, so using default: 50 print_temperature not found in profile, so using default: 0 support not found in profile, so using default: None filament_density not found in profile, so using default: 1.00 retraction_min_travel not found in profile, so using default: 5.0 retraction_speed not found in profile, so using default: 13.5 retraction_amount not found in profile, so using default: 0.0 retraction_extra not found in profile, so using default: 0.0 travel_speed not found in profile, so using default: 150 max_z_speed not found in profile, so using default: 1.0 bottom_layer_speed not found in profile, so using default: 25 cool_min_layer_time not found in profile, so using default: 10 model_scale not found in profile, so using default: 1.0 flip_x not found in profile, so using default: False flip_y not found in profile, so using default: False flip_z not found in profile, so using default: False model_rotate_base not found in profile, so using default: 0 model_multiply_x not found in profile, so using default: 1 model_multiply_y not found in profile, so using default: 1

daid commented 12 years ago

Yes, I missed this bug while building Beta4. It's solved in the github version. Sorry about the problem :(