XMLNem
commented
3 days ago ifndef USER_SETTINGS_H
define USER_SETTINGS_H
include
/ This file contains all the battery/inverter protocol settings Battery-Emulator software / / To switch between batteries/inverters, uncomment a line to enable, comment out to disable. / / There are also some options for battery limits and extra functionality / / To edit battery specific limits, see also the USER_SETTINGS.cpp file/
/ Select battery used / //#define BMW_I3_BATTERY //#define BYD_ATTO_3_BATTERY //#define CHADEMO_BATTERY //NOTE: inherently enables CONTACTOR_CONTROL below //#define IMIEV_CZERO_ION_BATTERY //#define JAGUAR_IPACE_BATTERY //#define KIA_HYUNDAI_64_BATTERY //#define KIA_E_GMP_BATTERY //#define KIA_HYUNDAI_HYBRID_BATTERY //#define MG_5_BATTERY //#define NISSAN_LEAF_BATTERY //#define PYLON_BATTERY //#define RENAULT_KANGOO_BATTERY //#define RENAULT_ZOE_GEN1_BATTERY //#define RENAULT_ZOE_GEN2_BATTERY //#define SANTA_FE_PHEV_BATTERY
define TESLA_MODEL_3_BATTERY
//#define VOLVO_SPA_BATTERY //#define TEST_FAKE_BATTERY
/ Select inverter communication protocol. See Wiki for which to use with your inverter: https://github.com/dalathegreat/BYD-Battery-Emulator-For-Gen24/wiki /
define BYD_CAN //Enable this line to emulate a "BYD Battery-Box Premium HVS" over CAN Bus
//#define BYD_MODBUS //Enable this line to emulate a "BYD 11kWh HVM battery" over Modbus RTU //#define LUNA2000_MODBUS //Enable this line to emulate a "Luna2000 battery" over Modbus RTU //#define PYLON_CAN //Enable this line to emulate a "Pylontech battery" over CAN bus //#define SMA_CAN //Enable this line to emulate a "BYD Battery-Box H 8.9kWh, 7 mod" over CAN bus //#define SMA_TRIPOWER_CAN //Enable this line to emulate a "SMA Home Storage battery" over CAN bus //#define SOFAR_CAN //Enable this line to emulate a "Sofar Energy Storage Inverter High Voltage BMS General Protocol (Extended Frame)" over CAN bus //#define SOLAX_CAN //Enable this line to emulate a "SolaX Triple Power LFP" over CAN bus
/ Select hardware used for Battery-Emulator /
define HW_LILYGO
//#define HW_STARK
/ Other options / //#define DEBUG_VIA_USB //Enable this line to have the USB port output serial diagnostic data while program runs (WARNING, raises CPU load, do not use for production) //#define DEBUG_CANFD_DATA //Enable this line to have the USB port output CAN-FD data while program runs (WARNING, raises CPU load, do not use for production) //#define INTERLOCK_REQUIRED //Nissan LEAF specific setting, if enabled requires both high voltage conenctors to be seated before starting //#define CONTACTOR_CONTROL //Enable this line to have pins 25,32,33 handle automatic precharge/contactor+/contactor- closing sequence //#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM logic for contactors, which lower power consumption and heat generation //#define DUAL_CAN //Enable this line to activate an isolated secondary CAN Bus using add-on MCP2515 controller (Needed for FoxESS inverters) //#define CAN_FD //Enable this line to activate an isolated secondary CAN-FD bus using add-on MCP2517FD controller (Needed for some batteries) //#define SERIAL_LINK_RECEIVER //Enable this line to receive battery data over RS485 pins from another Lilygo (This LilyGo interfaces with inverter) //#define SERIAL_LINK_TRANSMITTER //Enable this line to send battery data over RS485 pins to another Lilygo (This LilyGo interfaces with battery)
define WEBSERVER //Enable this line to enable WiFi, and to run the webserver. See USER_SETTINGS.cpp for the Wifi settings.
define LOAD_SAVED_SETTINGS_ON_BOOT //Enable this line to read settings stored via the webserver on boot (overrides Wifi/battery settings set below)
//#define FUNCTION_TIME_MEASUREMENT // Enable this to record execution times and present them in the web UI (WARNING, raises CPU load, do not use for production)
/ MQTT options / // #define MQTT // Enable this line to enable MQTT
define MQTT_SERVER "192.168.xxx.yyy"
define MQTT_PORT 1883
/ Event options/
define DUMMY_EVENT_ENABLED false //Enable this line to have a dummy event that gets logged to test the interface
/ Select charger used (Optional) / //#define CHEVYVOLT_CHARGER //Enable this line to control a Chevrolet Volt charger connected to battery - for example, when generator charging or using an inverter without a charging function. //#define NISSANLEAF_CHARGER //Enable this line to control a Nissan LEAF PDM connected to battery - for example, when generator charging
/ Battery settings /
// Predefined total energy capacity of the battery in Watt-hours
define BATTERY_WH_MAX 55000
// Increases battery life. If true will rescale SOC between the configured min/max-percentage
define BATTERY_USE_SCALED_SOC true
// 8000 = 80.0% , Max percentage the battery will charge to (Inverter gets 100% when reached)
define BATTERY_MAXPERCENTAGE 800
// 2000 = 20.0% , Min percentage the battery will discharge to (Inverter gets 0% when reached)
define BATTERY_MINPERCENTAGE 200
// 300 = 30.0A , BYD CAN specific setting, Max charge in Amp (Some inverters needs to be limited)
define BATTERY_MAX_CHARGE_AMP 300
// 300 = 30.0A , BYD CAN specific setting, Max discharge in Amp (Some inverters needs to be limited)
define BATTERY_MAX_DISCHARGE_AMP 300
extern volatile uint8_t AccessPointEnabled; extern const uint8_t wifi_channel;
/ Charger limits (Optional): Set in the USER_SETTINGS.cpp or later in the webserver / extern volatile float charger_setpoint_HV_VDC; extern volatile float charger_setpoint_HV_IDC; extern volatile float charger_setpoint_HV_IDC_END; extern volatile float CHARGER_SET_HV; extern volatile float CHARGER_MAX_HV; extern volatile float CHARGER_MIN_HV; extern volatile float CHARGER_MAX_POWER; extern volatile float CHARGER_MAX_A; extern volatile float CHARGER_END_A; extern bool charger_HV_enabled; extern bool charger_aux12V_enabled;
Gangster8214
NemesisXam
dalathegreat
mace-de
Expected Behavio
Tesla Model 3 battery, 2021 RWD, and Deye SUN-50k-SG01HP3-EU-BM4 inverter – the inverter does not detect the battery capacity.
I started the battery using a LilyGO ESP; the battery starts up, and information such as voltage, status, etc., is displayed on the web interface. However, the inverter does not detect the battery capacity. Please help.
Actual Behavior
Steps to Reproduce the Problem
Settings
HW_LILYGOnoyesyesno