No advanced features after successfull 2 Port bridge installation

[Jorindel53]

Hi, I installed a 2 port budget bridge in my AZE0, but none of the advanced features work (I hav'nt tried Rapidgate Dodger, though). I flashed the bridge successfully according to the instructions. It is connected to constant 12V and ground. The car shows normal behavior, same as before bridge installation. It has still it's original 24kWh battery, 79% SOH, 11bars. No DTC faults on Leaf Spy.

Will soon upgrade to a good 40kWh battery, which I already have. But will the can bridge work, if the advanced features do not? Have the advanced features been removed in the current firmware version? What else could be the reason?

[nicstoun]

I think you need to flash this part to have it ..https://github.com/dalathegreat/Nissan-Leaf-BatterySaver/blob/master/BatterySaver.c

[dalathegreat]

Hi @Jorindel53 That is correct, this software only focuses on getting the upgrade to work, nothing else. When I shipped the older version that had extra features, it constantly confused the users and caused people to accidentally activate extra features that they didn't want/need. This in turn led to emails asking for support, and supporting people everyday with using these extra features wasn't fun at all. So I decided to skip this entirely this time, for my own sanity!

[nicstoun]

Hi @dalathegreat interested in future only from current limiter , can get that if flash BatterySaver on 2port Bridge ? Or need to contact with you ?

Regards

[dalathegreat]

Hi @nicstoun , Patreon supporters have access to the older software versions!

[nicstoun]

Hi @nicstoun , Patreon supporters have access to the older software versions!

Thank you :)