search

dale3h / hassio-installer

Hass.io Installer for Raspberry Pi 3 B+ (Raspbian Stretch Lite)
103 stars 45 forks source link

Installation hangs while processing triggers for systemd #17

Open mickdekkers opened 6 years ago

mickdekkers commented 6 years ago

This is with a brand new Raspberry Pi 3 model B+ and micro SD card (Transcend High Endurance 16GB).

My process:

  1. flash SD with latest Raspbian Stretch Lite (April 2018, kernel version 4.14) using Etcher (verification is successful)
  2. touch ssh
  3. nano wpa_supplicant.conf and enter wifi network config
  4. insert micro sd card into pi, attach power cable and wait for it to come online
  5. ssh in and follow the instructions in the readme: 
    sudo su
curl -sL https://raw.githubusercontent.com/dale3h/hassio-installer/master/hassio_rpi3bp | bash -s
  6. observe as installation proceeds
  7. a short while into the installation, progress appears to have halted, with the last line of output being Processing triggers for systemd (232-25+deb9u2) .... The "act" LED no longer blinks.
  8. about 30 minutes later, the ssh session loses connection and the device appears to be offline (router no longer shows device), although the power LED is still on
  9. even 8 hours later (left it running overnight), nothing has changed and the device is still offline
  10. after unplugging the power cable, waiting a minute or so and reconnecting it, the ~device is still offline~ (edit: apparently not)

I then repeated the whole process from step 1 two more times, yielding the same result both times.

Output:

Click to expand ``` pi@raspberrypi:~ $ sudo su root@raspberrypi:/home/pi# curl -sL https://raw.githubusercontent.com/dale3h/hassio-installer/master/hassio_rpi3bp | bash -s Hostname will be changed on next reboot: hassio Updating APT packages list... Get:1 http://raspbian.raspberrypi.org/raspbian stretch InRelease [15.0 kB] Get:2 http://archive.raspberrypi.org/debian stretch InRelease [25.3 kB] Get:3 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packages [11.7 MB] Get:4 http://archive.raspberrypi.org/debian stretch/main armhf Packages [159 kB] Get:5 http://archive.raspberrypi.org/debian stretch/ui armhf Packages [32.9 kB] Fetched 11.9 MB in 8s (1,414 kB/s) Reading package lists... Done Ensure all requirements are installed... Reading package lists... Done Building dependency tree Reading state information... Done apt-transport-https is already the newest version (1.4.8). avahi-daemon is already the newest version (0.6.32-2). ca-certificates is already the newest version (20161130+nmu1). dbus is already the newest version (1.10.26-0+deb9u1). dbus set to manually installed. The following additional packages will be installed: apparmor dconf-gsettings-backend dconf-service dns-root-data dnsmasq-base gir1.2-glib-2.0 gir1.2-packagekitglib-1.0 glib-networking glib-networking-common glib-networking-services gsettings-desktop-schemas iputils-arping libapparmor-perl libbluetooth3 libcurl3 libdbus-glib-1-2 libdconf1 libgirepository-1.0-1 libglib2.0-bin libgstreamer1.0-0 libgudev-1.0-0 libjansson4 libjq1 libmbim-glib4 libmbim-proxy libmm-glib0 libndp0 libnm0 libonig4 libpackagekit-glib2-18 libpcap0.8 libproxy1v5 libqmi-glib5 libqmi-proxy libsoup2.4-1 libteamdctl0 modemmanager packagekit packagekit-tools ppp python3-apparmor python3-dbus python3-gi python3-libapparmor python3-pkg-resources python3-pycurl python3-software-properties unattended-upgrades Suggested packages: apparmor-profiles apparmor-profiles-extra vim-addon-manager gstreamer1.0-tools libteam-utils appstream python-dbus-doc python3-dbus-dbg python3-setuptools libcurl4-gnutls-dev python-pycurl-doc python3-pycurl-dbg bsd-mailx mail-transport-agent needrestart The following NEW packages will be installed: apparmor apparmor-utils dconf-gsettings-backend dconf-service dns-root-data dnsmasq-base gir1.2-glib-2.0 gir1.2-packagekitglib-1.0 glib-networking glib-networking-common glib-networking-services gsettings-desktop-schemas iputils-arping jq libapparmor-perl libbluetooth3 libdbus-glib-1-2 libdconf1 libgirepository-1.0-1 libglib2.0-bin libgstreamer1.0-0 libgudev-1.0-0 libjansson4 libjq1 libmbim-glib4 libmbim-proxy libmm-glib0 libndp0 libnm0 libonig4 libpackagekit-glib2-18 libpcap0.8 libproxy1v5 libqmi-glib5 libqmi-proxy libsoup2.4-1 libteamdctl0 modemmanager network-manager packagekit packagekit-tools ppp python3-apparmor python3-dbus python3-gi python3-libapparmor python3-pkg-resources python3-pycurl python3-software-properties socat software-properties-common unattended-upgrades The following packages will be upgraded: curl libcurl3 2 upgraded, 52 newly installed, 0 to remove and 15 not upgraded. Need to get 13.1 MB of archives. After this operation, 41.9 MB of additional disk space will be used. Get:1 http://archive.raspberrypi.org/debian stretch/main armhf dnsmasq-base armhf 2.76-5+rpt1+deb9u1 [385 kB] Get:2 http://mirror.transip.net/raspbian/raspbian stretch/main armhf curl armhf 7.52.1-5+deb9u6 [220 kB] Get:3 http://archive.raspberrypi.org/debian stretch/main armhf libbluetooth3 armhf 5.43-2+rpt2+deb9u2 [92.5 kB] Get:4 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libcurl3 armhf 7.52.1-5+deb9u6 [261 kB] Get:5 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libdconf1 armhf 0.26.0-2 [33.3 kB] Get:6 http://mirror.transip.net/raspbian/raspbian stretch/main armhf dconf-service armhf 0.26.0-2 [30.1 kB] Get:7 http://mirror.transip.net/raspbian/raspbian stretch/main armhf dconf-gsettings-backend armhf 0.26.0-2 [22.5 kB] Get:8 http://mirror.transip.net/raspbian/raspbian stretch/main armhf dns-root-data all 2017072601~deb9u1 [4,840 B] Get:9 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libgirepository-1.0-1 armhf 1.50.0-1 [76.4 kB] Get:10 http://mirror.transip.net/raspbian/raspbian stretch/main armhf gir1.2-glib-2.0 armhf 1.50.0-1 [139 kB] Get:11 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libpackagekit-glib2-18 armhf 1.1.5-2+deb9u1 [96.2 kB] Get:12 http://mirror.transip.net/raspbian/raspbian stretch/main armhf gir1.2-packagekitglib-1.0 armhf 1.1.5-2+deb9u1 [34.7 kB] Get:13 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libproxy1v5 armhf 0.4.14-2 [50.2 kB] Get:14 http://mirror.transip.net/raspbian/raspbian stretch/main armhf glib-networking-common all 2.50.0-1 [49.1 kB] Get:15 http://mirror.transip.net/raspbian/raspbian stretch/main armhf glib-networking-services armhf 2.50.0-1 [11.6 kB] Get:16 http://mirror.transip.net/raspbian/raspbian stretch/main armhf gsettings-desktop-schemas all 3.22.0-1 [473 kB] Get:17 http://mirror.transip.net/raspbian/raspbian stretch/main armhf glib-networking armhf 2.50.0-1 [48.2 kB] Get:18 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libonig4 armhf 6.1.3-2 [127 kB] Get:19 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libjq1 armhf 1.5+dfsg-1.3 [119 kB] Get:20 http://mirror.transip.net/raspbian/raspbian stretch/main armhf jq armhf 1.5+dfsg-1.3 [58.9 kB] Get:21 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libdbus-glib-1-2 armhf 0.108-2 [196 kB] Get:22 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libglib2.0-bin armhf 2.50.3-2 [1,608 kB] Get:23 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libgstreamer1.0-0 armhf 1.10.4-1 [1,873 kB] Get:24 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libgudev-1.0-0 armhf 230-3 [11.1 kB] Get:25 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libjansson4 armhf 2.9-1 [25.2 kB] Get:26 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libmbim-glib4 armhf 1.14.0-1 [56.1 kB] Get:27 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libmbim-proxy armhf 1.14.0-1 [6,904 B] Get:28 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libmm-glib0 armhf 1.6.4-1 [146 kB] Get:29 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libndp0 armhf 1.6-1 [9,328 B] Get:30 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libnm0 armhf 1.6.2-3 [439 kB] Get:31 http://mirror.nl.leaseweb.net/raspbian/raspbian stretch/main armhf libpcap0.8 armhf 1.8.1-3 [123 kB] Get:32 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libqmi-glib5 armhf 1.16.2-1 [326 kB] Get:33 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libqmi-proxy armhf 1.16.2-1 [8,340 B] Get:34 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libsoup2.4-1 armhf 2.56.0-2+deb9u1 [248 kB] Get:35 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libteamdctl0 armhf 1.26-1 [10.2 kB] Get:36 http://mirror.transip.net/raspbian/raspbian stretch/main armhf modemmanager armhf 1.6.4-1 [528 kB] Get:37 http://mirror.transip.net/raspbian/raspbian stretch/main armhf network-manager armhf 1.6.2-3 [2,029 kB] Get:38 http://mirror.transip.net/raspbian/raspbian stretch/main armhf packagekit armhf 1.1.5-2+deb9u1 [519 kB] Get:39 http://mirror.transip.net/raspbian/raspbian stretch/main armhf packagekit-tools armhf 1.1.5-2+deb9u1 [42.6 kB] Get:40 http://mirror.transip.net/raspbian/raspbian stretch/main armhf ppp armhf 2.4.7-1+4 [323 kB] Get:41 http://mirror.transip.net/raspbian/raspbian stretch/main armhf python3-dbus armhf 1.2.4-1 [177 kB] Get:42 http://mirror.transip.net/raspbian/raspbian stretch/main armhf python3-gi armhf 3.22.0-2 [458 kB] Get:43 http://mirror.transip.net/raspbian/raspbian stretch/main armhf python3-pkg-resources all 33.1.1-1 [137 kB] Get:44 http://mirror.transip.net/raspbian/raspbian stretch/main armhf python3-pycurl armhf 7.43.0-2 [58.4 kB] Get:45 http://mirror.transip.net/raspbian/raspbian stretch/main armhf python3-software-properties all 0.96.20.2-1 [49.5 kB] Get:46 http://mirror.transip.net/raspbian/raspbian stretch/main armhf software-properties-common all 0.96.20.2-1 [83.6 kB] Get:47 http://mirror.transip.net/raspbian/raspbian stretch/main armhf unattended-upgrades all 0.93.1+nmu1 [61.7 kB] Get:48 http://mirror.transip.net/raspbian/raspbian stretch/main armhf libapparmor-perl armhf 2.11.0-3+deb9u2 [79.6 kB] Get:49 http://mirror.transip.net/raspbian/raspbian stretch/main armhf apparmor armhf 2.11.0-3+deb9u2 [438 kB] Get:50 http://mirror.transip.net/raspbian/raspbian stretch/main armhf python3-libapparmor armhf 2.11.0-3+deb9u2 [74.2 kB] Get:51 http://mirror.transip.net/raspbian/raspbian stretch/main armhf python3-apparmor armhf 2.11.0-3+deb9u2 [130 kB] Get:52 http://mirror.transip.net/raspbian/raspbian stretch/main armhf apparmor-utils armhf 2.11.0-3+deb9u2 [103 kB] Get:53 http://mirror.transip.net/raspbian/raspbian stretch/main armhf iputils-arping armhf 3:20161105-1 [32.9 kB] Get:54 http://mirror.nl.leaseweb.net/raspbian/raspbian stretch/main armhf socat armhf 1.7.3.1-2+deb9u1 [320 kB] Fetched 13.1 MB in 9s (1,407 kB/s) apt-listchanges: Reading changelogs... Extracting templates from packages: 100% Preconfiguring packages ... (Reading database ... 34360 files and directories currently installed.) Preparing to unpack .../00-curl_7.52.1-5+deb9u6_armhf.deb ... Unpacking curl (7.52.1-5+deb9u6) over (7.52.1-5+deb9u5) ... Preparing to unpack .../01-libcurl3_7.52.1-5+deb9u6_armhf.deb ... Unpacking libcurl3:armhf (7.52.1-5+deb9u6) over (7.52.1-5+deb9u5) ... Selecting previously unselected package libdconf1:armhf. Preparing to unpack .../02-libdconf1_0.26.0-2_armhf.deb ... Unpacking libdconf1:armhf (0.26.0-2) ... Selecting previously unselected package dconf-service. Preparing to unpack .../03-dconf-service_0.26.0-2_armhf.deb ... Unpacking dconf-service (0.26.0-2) ... Selecting previously unselected package dconf-gsettings-backend:armhf. Preparing to unpack .../04-dconf-gsettings-backend_0.26.0-2_armhf.deb ... Unpacking dconf-gsettings-backend:armhf (0.26.0-2) ... Selecting previously unselected package dns-root-data. Preparing to unpack .../05-dns-root-data_2017072601~deb9u1_all.deb ... Unpacking dns-root-data (2017072601~deb9u1) ... Selecting previously unselected package dnsmasq-base. Preparing to unpack .../06-dnsmasq-base_2.76-5+rpt1+deb9u1_armhf.deb ... Unpacking dnsmasq-base (2.76-5+rpt1+deb9u1) ... Selecting previously unselected package libgirepository-1.0-1:armhf. Preparing to unpack .../07-libgirepository-1.0-1_1.50.0-1_armhf.deb ... Unpacking libgirepository-1.0-1:armhf (1.50.0-1) ... Selecting previously unselected package gir1.2-glib-2.0:armhf. Preparing to unpack .../08-gir1.2-glib-2.0_1.50.0-1_armhf.deb ... Unpacking gir1.2-glib-2.0:armhf (1.50.0-1) ... Selecting previously unselected package libpackagekit-glib2-18:armhf. Preparing to unpack .../09-libpackagekit-glib2-18_1.1.5-2+deb9u1_armhf.deb ... Unpacking libpackagekit-glib2-18:armhf (1.1.5-2+deb9u1) ... Selecting previously unselected package gir1.2-packagekitglib-1.0. Preparing to unpack .../10-gir1.2-packagekitglib-1.0_1.1.5-2+deb9u1_armhf.deb ... Unpacking gir1.2-packagekitglib-1.0 (1.1.5-2+deb9u1) ... Selecting previously unselected package libproxy1v5:armhf. Preparing to unpack .../11-libproxy1v5_0.4.14-2_armhf.deb ... Unpacking libproxy1v5:armhf (0.4.14-2) ... Selecting previously unselected package glib-networking-common. Preparing to unpack .../12-glib-networking-common_2.50.0-1_all.deb ... Unpacking glib-networking-common (2.50.0-1) ... Selecting previously unselected package glib-networking-services. Preparing to unpack .../13-glib-networking-services_2.50.0-1_armhf.deb ... Unpacking glib-networking-services (2.50.0-1) ... Selecting previously unselected package gsettings-desktop-schemas. Preparing to unpack .../14-gsettings-desktop-schemas_3.22.0-1_all.deb ... Unpacking gsettings-desktop-schemas (3.22.0-1) ... Selecting previously unselected package glib-networking:armhf. Preparing to unpack .../15-glib-networking_2.50.0-1_armhf.deb ... Unpacking glib-networking:armhf (2.50.0-1) ... Selecting previously unselected package libonig4:armhf. Preparing to unpack .../16-libonig4_6.1.3-2_armhf.deb ... Unpacking libonig4:armhf (6.1.3-2) ... Selecting previously unselected package libjq1:armhf. Preparing to unpack .../17-libjq1_1.5+dfsg-1.3_armhf.deb ... Unpacking libjq1:armhf (1.5+dfsg-1.3) ... Selecting previously unselected package jq. Preparing to unpack .../18-jq_1.5+dfsg-1.3_armhf.deb ... Unpacking jq (1.5+dfsg-1.3) ... Selecting previously unselected package libbluetooth3:armhf. Preparing to unpack .../19-libbluetooth3_5.43-2+rpt2+deb9u2_armhf.deb ... Unpacking libbluetooth3:armhf (5.43-2+rpt2+deb9u2) ... Selecting previously unselected package libdbus-glib-1-2:armhf. Preparing to unpack .../20-libdbus-glib-1-2_0.108-2_armhf.deb ... Unpacking libdbus-glib-1-2:armhf (0.108-2) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../21-libglib2.0-bin_2.50.3-2_armhf.deb ... Unpacking libglib2.0-bin (2.50.3-2) ... Selecting previously unselected package libgstreamer1.0-0:armhf. Preparing to unpack .../22-libgstreamer1.0-0_1.10.4-1_armhf.deb ... Unpacking libgstreamer1.0-0:armhf (1.10.4-1) ... Selecting previously unselected package libgudev-1.0-0:armhf. Preparing to unpack .../23-libgudev-1.0-0_230-3_armhf.deb ... Unpacking libgudev-1.0-0:armhf (230-3) ... Selecting previously unselected package libjansson4:armhf. Preparing to unpack .../24-libjansson4_2.9-1_armhf.deb ... Unpacking libjansson4:armhf (2.9-1) ... Selecting previously unselected package libmbim-glib4:armhf. Preparing to unpack .../25-libmbim-glib4_1.14.0-1_armhf.deb ... Unpacking libmbim-glib4:armhf (1.14.0-1) ... Selecting previously unselected package libmbim-proxy. Preparing to unpack .../26-libmbim-proxy_1.14.0-1_armhf.deb ... Unpacking libmbim-proxy (1.14.0-1) ... Selecting previously unselected package libmm-glib0:armhf. Preparing to unpack .../27-libmm-glib0_1.6.4-1_armhf.deb ... Unpacking libmm-glib0:armhf (1.6.4-1) ... Selecting previously unselected package libndp0:armhf. Preparing to unpack .../28-libndp0_1.6-1_armhf.deb ... Unpacking libndp0:armhf (1.6-1) ... Selecting previously unselected package libnm0:armhf. Preparing to unpack .../29-libnm0_1.6.2-3_armhf.deb ... Unpacking libnm0:armhf (1.6.2-3) ... Selecting previously unselected package libpcap0.8:armhf. Preparing to unpack .../30-libpcap0.8_1.8.1-3_armhf.deb ... Unpacking libpcap0.8:armhf (1.8.1-3) ... Selecting previously unselected package libqmi-glib5:armhf. Preparing to unpack .../31-libqmi-glib5_1.16.2-1_armhf.deb ... Unpacking libqmi-glib5:armhf (1.16.2-1) ... Selecting previously unselected package libqmi-proxy. Preparing to unpack .../32-libqmi-proxy_1.16.2-1_armhf.deb ... Unpacking libqmi-proxy (1.16.2-1) ... Selecting previously unselected package libsoup2.4-1:armhf. Preparing to unpack .../33-libsoup2.4-1_2.56.0-2+deb9u1_armhf.deb ... Unpacking libsoup2.4-1:armhf (2.56.0-2+deb9u1) ... Selecting previously unselected package libteamdctl0:armhf. Preparing to unpack .../34-libteamdctl0_1.26-1_armhf.deb ... Unpacking libteamdctl0:armhf (1.26-1) ... Selecting previously unselected package modemmanager. Preparing to unpack .../35-modemmanager_1.6.4-1_armhf.deb ... Unpacking modemmanager (1.6.4-1) ... Selecting previously unselected package network-manager. Preparing to unpack .../36-network-manager_1.6.2-3_armhf.deb ... Unpacking network-manager (1.6.2-3) ... Selecting previously unselected package packagekit. Preparing to unpack .../37-packagekit_1.1.5-2+deb9u1_armhf.deb ... Unpacking packagekit (1.1.5-2+deb9u1) ... Selecting previously unselected package packagekit-tools. Preparing to unpack .../38-packagekit-tools_1.1.5-2+deb9u1_armhf.deb ... Unpacking packagekit-tools (1.1.5-2+deb9u1) ... Selecting previously unselected package ppp. Preparing to unpack .../39-ppp_2.4.7-1+4_armhf.deb ... Unpacking ppp (2.4.7-1+4) ... Selecting previously unselected package python3-dbus. Preparing to unpack .../40-python3-dbus_1.2.4-1_armhf.deb ... Unpacking python3-dbus (1.2.4-1) ... Selecting previously unselected package python3-gi. Preparing to unpack .../41-python3-gi_3.22.0-2_armhf.deb ... Unpacking python3-gi (3.22.0-2) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../42-python3-pkg-resources_33.1.1-1_all.deb ... Unpacking python3-pkg-resources (33.1.1-1) ... Selecting previously unselected package python3-pycurl. Preparing to unpack .../43-python3-pycurl_7.43.0-2_armhf.deb ... Unpacking python3-pycurl (7.43.0-2) ... Selecting previously unselected package python3-software-properties. Preparing to unpack .../44-python3-software-properties_0.96.20.2-1_all.deb ... Unpacking python3-software-properties (0.96.20.2-1) ... Selecting previously unselected package software-properties-common. Preparing to unpack .../45-software-properties-common_0.96.20.2-1_all.deb ... Unpacking software-properties-common (0.96.20.2-1) ... Selecting previously unselected package unattended-upgrades. Preparing to unpack .../46-unattended-upgrades_0.93.1+nmu1_all.deb ... Unpacking unattended-upgrades (0.93.1+nmu1) ... Selecting previously unselected package libapparmor-perl. Preparing to unpack .../47-libapparmor-perl_2.11.0-3+deb9u2_armhf.deb ... Unpacking libapparmor-perl (2.11.0-3+deb9u2) ... Selecting previously unselected package apparmor. Preparing to unpack .../48-apparmor_2.11.0-3+deb9u2_armhf.deb ... Unpacking apparmor (2.11.0-3+deb9u2) ... Selecting previously unselected package python3-libapparmor. Preparing to unpack .../49-python3-libapparmor_2.11.0-3+deb9u2_armhf.deb ... Unpacking python3-libapparmor (2.11.0-3+deb9u2) ... Selecting previously unselected package python3-apparmor. Preparing to unpack .../50-python3-apparmor_2.11.0-3+deb9u2_armhf.deb ... Unpacking python3-apparmor (2.11.0-3+deb9u2) ... Selecting previously unselected package apparmor-utils. Preparing to unpack .../51-apparmor-utils_2.11.0-3+deb9u2_armhf.deb ... Unpacking apparmor-utils (2.11.0-3+deb9u2) ... Selecting previously unselected package iputils-arping. Preparing to unpack .../52-iputils-arping_3%3a20161105-1_armhf.deb ... Unpacking iputils-arping (3:20161105-1) ... Selecting previously unselected package socat. Preparing to unpack .../53-socat_1.7.3.1-2+deb9u1_armhf.deb ... Unpacking socat (1.7.3.1-2+deb9u1) ... Setting up python3-pycurl (7.43.0-2) ... Setting up glib-networking-common (2.50.0-1) ... Setting up libgstreamer1.0-0:armhf (1.10.4-1) ... Setcap worked! gst-ptp-helper is not suid! Setting up libcurl3:armhf (7.52.1-5+deb9u6) ... Setting up libdbus-glib-1-2:armhf (0.108-2) ... Setting up python3-libapparmor (2.11.0-3+deb9u2) ... Setting up socat (1.7.3.1-2+deb9u1) ... Processing triggers for libglib2.0-0:armhf (2.50.3-2) ... Setting up libonig4:armhf (6.1.3-2) ... Setting up libjansson4:armhf (2.9-1) ... Setting up libbluetooth3:armhf (5.43-2+rpt2+deb9u2) ... Setting up libproxy1v5:armhf (0.4.14-2) ... Setting up dns-root-data (2017072601~deb9u1) ... Setting up glib-networking-services (2.50.0-1) ... Setting up libpackagekit-glib2-18:armhf (1.1.5-2+deb9u1) ... Setting up python3-pkg-resources (33.1.1-1) ... Setting up libgirepository-1.0-1:armhf (1.50.0-1) ... Setting up python3-apparmor (2.11.0-3+deb9u2) ... Setting up libjq1:armhf (1.5+dfsg-1.3) ... Setting up gir1.2-glib-2.0:armhf (1.50.0-1) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Setting up libmm-glib0:armhf (1.6.4-1) ... Processing triggers for systemd (232-25+deb9u2) ... Setting up unattended-upgrades (0.93.1+nmu1) ... Creating config file /etc/apt/apt.conf.d/20auto-upgrades with new version Creating config file /etc/apt/apt.conf.d/50unattended-upgrades with new version Created symlink /etc/systemd/system/multi-user.target.wants/unattended-upgrades.service → /lib/systemd/system/unattended-upgrades.service. Synchronizing state of unattended-upgrades.service with SysV service script with /lib/systemd/systemd-sysv-install. Executing: /lib/systemd/systemd-sysv-install enable unattended-upgrades Setting up libdconf1:armhf (0.26.0-2) ... Setting up dnsmasq-base (2.76-5+rpt1+deb9u1) ... Processing triggers for man-db (2.7.6.1-2) ... Setting up gir1.2-packagekitglib-1.0 (1.1.5-2+deb9u1) ... Setting up python3-software-properties (0.96.20.2-1) ... Setting up libgudev-1.0-0:armhf (230-3) ... Processing triggers for dbus (1.10.26-0+deb9u1) ... Setting up libndp0:armhf (1.6-1) ... Setting up iputils-arping (3:20161105-1) ... Setting up libglib2.0-bin (2.50.3-2) ... Setting up libapparmor-perl (2.11.0-3+deb9u2) ... Setting up libteamdctl0:armhf (1.26-1) ... Setting up packagekit (1.1.5-2+deb9u1) ... Setting up libpcap0.8:armhf (1.8.1-3) ... Setting up jq (1.5+dfsg-1.3) ... Setting up libmbim-glib4:armhf (1.14.0-1) ... Setting up python3-dbus (1.2.4-1) ... Setting up ppp (2.4.7-1+4) ... Created symlink /etc/systemd/system/multi-user.target.wants/pppd-dns.service → /lib/systemd/system/pppd-dns.service. Setting up dconf-service (0.26.0-2) ... Setting up curl (7.52.1-5+deb9u6) ... Setting up libnm0:armhf (1.6.2-3) ... Setting up apparmor (2.11.0-3+deb9u2) ... Created symlink /etc/systemd/system/sysinit.target.wants/apparmor.service → /lib/systemd/system/apparmor.service. update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults diff: /var/lib/apparmor/profiles/.apparmor.md5sums: No such file or directory Setting up python3-gi (3.22.0-2) ... Setting up libmbim-proxy (1.14.0-1) ... Setting up packagekit-tools (1.1.5-2+deb9u1) ... Setting up dconf-gsettings-backend:armhf (0.26.0-2) ... Setting up apparmor-utils (2.11.0-3+deb9u2) ... Setting up software-properties-common (0.96.20.2-1) ... Setting up gsettings-desktop-schemas (3.22.0-1) ... Setting up libqmi-glib5:armhf (1.16.2-1) ... Setting up libqmi-proxy (1.16.2-1) ... Setting up glib-networking:armhf (2.50.0-1) ... Setting up modemmanager (1.6.4-1) ... Created symlink /etc/systemd/system/dbus-org.freedesktop.ModemManager1.service → /lib/systemd/system/ModemManager.service. Created symlink /etc/systemd/system/multi-user.target.wants/ModemManager.service → /lib/systemd/system/ModemManager.service. Setting up libsoup2.4-1:armhf (2.56.0-2+deb9u1) ... Setting up network-manager (1.6.2-3) ... Created symlink /etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service → /lib/systemd/system/NetworkManager-dispatcher.service. Created symlink /etc/systemd/system/network-online.target.wants/NetworkManager-wait-online.service → /lib/systemd/system/NetworkManager-wait-online.service. Created symlink /etc/systemd/system/multi-user.target.wants/NetworkManager.service → /lib/systemd/system/NetworkManager.service. Processing triggers for libc-bin (2.24-11+deb9u3) ... Processing triggers for systemd (232-25+deb9u2) ... ```


One thing to note is that if you search the output for Processing triggers for systemd, it appears twice. Perhaps there is something specific about the second time that causes the installation to hang there.

Does anyone have any ideas that might help to resolve this issue?

jiriteach commented 6 years ago

Running this now and experiencing the exact same issue! Seems to be an issue with installing Docker. Reboot and run the installation again and it works.

mickdekkers commented 6 years ago

Thanks @Jiriteach! Rebooting and running the installation again also worked for me.

mefizto commented 6 years ago

me paso igual, reiniciando funciono después de unos instantes se desconecto, al parecer se instala todo bien, pero unos instantes después de reiniciar se desconecta y ya no hace nada

tengo que escribir en ingles?

mickdekkers commented 6 years ago

@mefizto Creo que ayudaría si escribes tu comentario en inglés también. Tal vez podrías usar Google Translate para traducir del español. Es bastante bueno.

Translation: I think it would help if you write your comment in English too. Perhaps you could use Google Translate to translate from Spanish. It's pretty good.

jiriteach commented 6 years ago

@mefizto Yup writing in English would help but after translating. You do have to wait a good period of time after the installation and a reboot for the setup to download and install components. You should be able to browse to http://xxxx:8193 and see the waiting screen. If this doesn't work - I would try and reflash and see what happens.

mefizto commented 6 years ago

how much time do I have to wait after receiving the message that it was installed correctly

jiriteach commented 6 years ago

After you run the commands, wait 5 then try and access the web interface. When you do this - it will say please wait as it’s downloading and setting things up. Could be up to 20 mins.

mefizto commented 6 years ago

The raspberry is disconnected after the installation, and try restarting several times but always disconnected. has something to do that I connect via wifi

mefizto commented 6 years ago

and yes, that was the problem, when doing the installation, the wifi configuration is lost.

mefizto commented 6 years ago

seems like its better to use eth

randytsuch commented 6 years ago

FWIW, I've tried this a few times in the last few days. It seemed to work best when I installed a fresh stretch lite to SD, did an apt-get update and upgrade, reboot, then started the install right after it came back. That was how I did it the last time I tried, and it installed no problem. BTW, it would be nice to include in the first page what you see at the end if it works, the http messages where to start home assistant.