wakeup wake lock: mmc_delayed_work

[GoogleCodeExporter]

Hi,

I am trying to run rowboat on beagleboard rev C3 and am getting the
following error. It is due to mmc late response as I am using the image
from mmc. Since I did not connect the touchscreen, I could not set any
wakeup or sleep. Please help and let me know if more details are needed.
The error as reported on the console is as below:

/////////////////////////////////////////////////////////////////////
Powerdomain (core_pwrdm) didn't enter target state 1

Powerdomain (per_pwrdm) didn't enter target state 1

Powerdomain (usbhost_pwrdm) didn't enter target state 1

Could not enter target state in pm_suspend

wakeup wake lock: mmc_delayed_work

Restarting tasks ... done.

suspend: exit suspend, ret = 0 (2000-01-01 01:17:59.541076658 UTC)

PM: Syncing filesystems ... done.

Freezing user space processes ... (elapsed 0.00 seconds) done.

Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.

Suspending console(s) (use no_console_suspend to debug)

Powerdomain (core_pwrdm) didn't enter target state 1

Powerdomain (per_pwrdm) didn't enter target state 1

Powerdomain (usbhost_pwrdm) didn't enter target state 1

Could not enter target state in pm_suspend

wakeup wake lock: mmc_delayed_work

Restarting tasks ... done.

suspend: exit suspend, ret = 0 (2000-01-01 01:24:24.563415526 UTC)

PM: Syncing filesystems ... done.

Freezing user space processes ... (elapsed 0.00 seconds) done.

Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.

Suspending console(s) (use no_console_suspend to debug)
/////////////////////////////////////////////////////////////////////////

Original issue reported on code.google.com by shiva.ch...@gmail.com on 5 Feb 2010 at 11:42

[GoogleCodeExporter]

Hi,

I am also facing the same issue, i have a beagleboard C3.
Once android boots up after few minutes it freezes all the userspace processes.

Can someone guide us on this issue?

Thanks in advance
Rahul Soparkar

Original comment by soparkar...@gmail.com on 26 Mar 2010 at 9:53

[GoogleCodeExporter]

So with me?...

done.nPM: Syncing filesystems ... 
# ifcFreezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
Powerdomain (mpu_pwrdm) didn't enter target state 0
Powerdomain (neon_pwrdm) didn't enter target state 0
Powerdomain (core_pwrdm) didn't enter target state 0
Powerdomain (cam_pwrdm) didn't enter target state 0
Powerdomain (per_pwrdm) didn't enter target state 0
Could not enter target state in pm_suspend
wakeup wake lock: mmc_delayed_work
pm_op(): platform_pm_resume+0x0/0x4c returns -22
PM: Device mmci-omap-hs.1 failed to resume: error -22
done.rting tasks ... 
uspend: exit suspend, ret = 0 (1970-01-02 00:01:10.933776854 UTC)
[3C
i: not found
# PM: Syncing filesystems ... 
# done.
Freezing user space processes ... 
Freezing of tasks aborted after 0.00 seconds (224 tasks refusing to freeze):

Restarting tasks ... 
                     done.
suspend: exit suspend, ret = -16 (1970-01-02 00:01:11.021026613 UTC)
# PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
Powerdomain (mpu_pwrdm) didn't enter target state 0
Powerdomain (neon_pwrdm) didn't enter target state 0
Powerdomain (core_pwrdm) didn't enter target state 0
Powerdomain (cam_pwrdm) didn't enter target state 0
Powerdomain (per_pwrdm) didn't enter target state 0
Could not enter target state in pm_suspend
wakeup wake lock: mmc_delayed_work
pm_op(): platform_pm_resume+0x0/0x4c returns -22
PM: Device mmci-omap-hs.1 failed to resume: error -22
Restarting tasks ... 
                     done.
suspend: exit suspend, ret = 0 (1970-01-02 00:01:12.516448974 UTC)
# PM: Syncing filesystems ... done.
Freezing user space processes ... 
Freezing of tasks aborted after 0.00 seconds (226 tasks refusing to freeze):

Restarting tasks ... done.
suspend: exit suspend, ret = -16 (1970-01-02 00:01:12.728332519 UTC)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)

Original comment by luoyongg...@gmail.com on 6 May 2011 at 7:57

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

I found a solution to this problem, just change the 
Settings->Display->Sleep Timeout to 30 minute!

Original comment by luoyongg...@gmail.com on 6 May 2011 at 8:37

[GoogleCodeExporter]

When you said "Setting->Display->Sleep", is that from a GUI environment?

Original comment by DeniseT...@gmail.com on 14 May 2011 at 3:28

[GoogleCodeExporter]

Hi,

I am working run a test of p2p GO mode. After the board went in suspend mode, 
its reboot and logs are:
please help me on this.
[  249.083740] request_suspend_state: sleep (0->3) at 246484649619 (2000-01-01 
00:04:14.068852407 UTC)
[  249.612823] PM: Syncing filesystems ... done.
[  249.620178] Freezing user space processes ... (elapsed 0.02 seconds) done.
[  249.651916] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) 
done.
[  249.672668] Suspending console(s) (use no_console_suspend to debug)
[  249.755126] cw1200_suspend,going to suspend
[  249.789306] PM: suspend of devices complete after 109.649 msecs
[  249.789337] suspend_set_state: ab8500-ext-supply3: No configuration
[  249.789337] suspend_set_state: ab8500-ext-supply2: No configuration
[  249.789367] suspend_set_state: ab8500-ext-supply1: No configuration
[  249.790802] PM: late suspend of devices complete after 1.434 msecs
[  249.796691] Disabling non-boot CPUs ...
[  249.808105] CPU1: shutdown
[  249.808135] CPU1: shutdown
[  294.626129] Returning from ApDeepSleep. PRCMU ret: 0xf6 - Success
[  294.628112] wakeup wake lock: alarm_rtc
[  294.634490] PM: early resume of devices complete after 1.007 msecs
[  294.636901] cw1200_resume,resumed from suspend
[  294.638427] abx500-acc-det ab8500-acc-det.0: Accessory: DISCONNECTED
[  294.660156] PM: resume of devices complete after 24.522 msecs
[  294.737457] Restarting tasks ... 
[  294.740997] hub 1-0:1.0: activate --> -22
[  294.767364] done.
[  294.786071] suspend: exit suspend, ret = 0 (2000-01-01 00:04:59.804867557 
UTC)
[  294.793365] Enabling non-boot CPUs ...
[  294.826812] CPU1: Booted secondary processor
[  294.826843] CPU1: Unknown IPI message 0x1
[  294.827758] CPU1 is up
[  294.836517] Switched to NOHz mode on CPU #1
[  294.952819] PM: Syncing filesystems ... done.
[  294.958801] Freezing user space processes ... (elapsed 0.02 seconds) done.
[  294.989593] Freezing remaining freezable tasks ... 
[  294.994476] active wake lock alarm, time left 499
[  294.999420] 
[  295.000915] Freezing of tasks  aborted
[  295.005096] 
[  295.006622] Restarting tasks ... done.
[  295.027832] suspend: exit suspend, ret = -16 (2000-01-01 00:05:00.046482509 
UTC)
[  295.041473] PM: Syncing filesystems ... done.
[  295.047668] Freezing user space processes ... (elapsed 0.02 seconds) done.
[  295.080139] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) 
done.
[  295.100250] Suspending console(s) (use no_console_suspend to debug)
[  295.197174] cw1200_suspend,going to suspend
[  295.199157] PM: suspend of devices complete after 91.930 msecs
[  295.199188] suspend_set_state: ab8500-ext-supply3: No configuration
[  295.199188] suspend_set_state: ab8500-ext-supply2: No configuration
[  295.199188] suspend_set_state: ab8500-ext-supply1: No configuration
[  295.200256] PM: late suspend of devices complete after 1.037 msecs
[  295.205383] Disabling non-boot CPUs ...
[  295.206481] CPU1: shutdown
[  295.206542] CPU1: shutdown
[  325.213317] Returning from ApDeepSleep. PRCMU ret: 0xf6 - Success
[  325.219787] PM: early resume of devices complete after 0.701 msecs
[  325.220123] wakeup wake lock: event0-1791
[  325.223449] abx500-acc-det ab8500-acc-det.0: Accessory: DISCONNECTED
[  325.246490] PM: resume of devices complete after 25.531 msecs
[  325.319458] Restarting tasks ... done.
[  325.352783] suspend: exit suspend, ret = 0 (2000-01-01 00:05:30.247400479 
UTC)
[  325.360870] Enabling non-boot CPUs ...
[  325.365753] PM: Syncing filesystems ... done.
[  325.370758] Freezing user space processes ... CPU1: Booted secondary 
processor
[  325.392730] CPU1: Unknown IPI message 0x1
[  325.393524] (elapsed 0.01 seconds) 
[  325.393646] CPU1 is up
[  325.406433] Switched to NOHz mode on CPU #1
[  325.410736] done.
[  325.412689] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) 
done.
[  325.436370] Suspending console(s) (use no_console_suspend to debug)
[  326.044372] PM: suspend of devices complete after 600.883 msecs
[  326.044403] suspend_set_state: ab8500-ext-supply3: No configuration
[  326.044403] suspend_set_state: ab8500-ext-supply2: No configuration
[  326.044403] suspend_set_state: ab8500-ext-supply1: No configuration
[  326.045440] PM: late suspend of devices complete after 0.976 msecs
[  326.052124] Disabling non-boot CPUs ...
[  326.053283] CPU1: shutdown
[  326.053283] CPU1: shutdown
[  326.054351] suspend/resume: pending interrupt
[  326.060882] PM: early resume of devices complete after 0.579 msecs
[  326.061248] wakeup wake lock: event0-1791
[  326.064605] abx500-acc-det ab8500-acc-det.0: Accessory: DISCONNECTED
[  326.086486] PM: resume of devices complete after 24.367 msecs
[  326.163421] Restarting tasks ... done.
[  326.179534] suspend: exit suspend, ret = -16 (2000-01-01 00:05:31.445323686 
UTC)
[  326.187011] Enabling non-boot CPUs ...
[  326.192230] PM: Syncing filesystems ... done.
[  326.197418] Freezing user space processes ... CPU1: Booted secondary 
processor
[  326.219665] CPU1: Unknown IPI message 0x1
[  326.220428] CPU1 is up
[  326.229797] Switched to NOHz mode on CPU #1
[  326.229949] (elapsed 0.02 seconds) done.
[  326.229980] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) 
done.
[  326.246520] Suspending console(s) (use no_console_suspend to debug)
[  326.625091] PM: suspend of devices complete after 371.418 msecs
[  326.625091] suspend_set_state: ab8500-ext-supply3: No configuration
[  326.625122] suspend_set_state: ab8500-ext-supply2: No configuration
[  326.625122] suspend_set_state: ab8500-ext-supply1: No configuration
[  326.626159] PM: late suspend of devices complete after 0.976 msecs
[  326.632141] Disabling non-boot CPUs ...
[  326.633239] CPU1: shutdown
[  326.633239] CPU1: shutdown
[  326.634368] suspend/resume: pending interrupt
[  326.640899] PM: early resume of devices complete after 0.549 msecs
[  326.641448] wakeup wake lock: power-supply
[  326.644805] abx500-acc-det ab8500-acc-det.0: Accessory: DISCONNECTED
[  326.667999] PM: resume of devices complete after 25.683 msecs
[  326.735229] Restarting tasks ... done.
[  326.760437] suspend: exit suspend, ret = -16 (2000-01-01 00:05:32.626903426 
UTC)
[  326.768341] Enabling non-boot CPUs ...
[  326.773406] PM: Syncing filesystems ... done.
[  326.778594] Freezing user space processes ... CPU1: Booted secondary 
processor
[  326.800933] CPU1: Unknown IPI message 0x1
[  326.801696] CPU1 is up
[  326.804077] Switched to NOHz mode on CPU #1
[  326.815368] (elapsed 0.03 seconds) done.
[  326.819305] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) 
done.
[  326.847839] Suspending console(s) (use no_console_suspend to debug)
[  327.195800] PM: suspend of devices complete after 340.883 msecs
[  327.195831] suspend_set_state: ab8500-ext-supply3: No configuration
[  327.195831] suspend_set_state: ab8500-ext-supply2: No configuration
[  327.195861] suspend_set_state: ab8500-ext-supply1: No configuration
[  327.196868] PM: late suspend of devices complete after 0.976 msecs
[  327.202850] Disabling non-boot CPUs ...
[  327.203948] CPU1: shutdown
[  327.203979] CPU1: shutdown
[  327.205261] suspend/resume: pending interrupt
[  327.219665] PM: early resume of devices complete after 0.549 msecs
[  327.220062] wakeup wake lock: event0-1791
[  327.223205] abx500-acc-det ab8500-acc-det.0: Accessory: DISCONNECTED
[  327.246185] PM: resume of devices complete after 25.373 msecs
[  327.313385] Restarting tasks ... done.
[  327.328674] suspend: exit suspend, ret = -16 (2000-01-01 00:05:33.194472043 
UTC)
[  327.336120] Enabling non-boot CPUs ...
[  327.340850] PM: Syncing filesystems ... done.
[  327.346038] Freezing user space processes ... CPU1: Booted secondary 
processor
[  327.368316] CPU1: Unknown IPI message 0x1
[  327.369201] CPU1 is up
[  327.378601] Switched to NOHz mode on CPU #1
[  327.378753] (elapsed 0.02 seconds) done.
[  327.378753] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) 
done.
[  327.398071] Suspending console(s) (use no_console_suspend to debug)
[  327.776824] PM: suspend of devices complete after 371.645 msecs
[  327.776855] suspend_set_state: ab8500-ext-supply3: No configuration
[  327.776855] suspend_set_state: ab8500-ext-supply2: No configuration
[  327.776885] suspend_set_state: ab8500-ext-supply1: No configuration
[  327.777893] PM: late suspend of devices complete after 0.945 msecs
[  327.783111] Disabling non-boot CPUs ...
[  327.784179] CPU1: shutdown
[  327.784210] CPU1: shutdown
[  327.785156] suspend/resume: pending interrupt
[  327.790771] PM: early resume of devices complete after 0.549 msecs
[  327.794067] abx500-acc-det ab8500-acc-det.0: Accessory: DISCONNECTED
[  327.811187] wakeup wake lock: event1-1791
[  327.818481] PM: resume of devices complete after 26.777 msecs
[  327.885589] Restarting tasks ... done.
[  327.901855] suspend: exit suspend, ret = -16 (2000-01-01 00:05:34.368608582 
UTC)
[  327.909332] Enabling non-boot CPUs ...
[  327.914093] PM: Syncing filesystems ... done.
[  327.919219] Freezing user space processes ... CPU1: Booted secondary 
processor
[  327.941528] CPU1: Unknown IPI message 0x1
[  327.942291] CPU1 is up
[  327.951660] Switched to NOHz mode on CPU #1
[  327.951904] (elapsed 0.02 seconds) done.
[  327.951904] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) 
done.
[  327.968475] Suspending console(s) (use no_console_suspend to debug)
[  328.346984] PM: suspend of devices complete after 371.444 msecs
[  328.347015] suspend_set_state: ab8500-ext-supply3: No configuration
[  328.347015] suspend_set_state: ab8500-ext-supply2: No configuration
[  328.347045] suspend_set_state: ab8500-ext-supply1: No configuration
[  328.348052] PM: late suspend of devices complete after 0.976 msecs
[  328.353973] Disabling non-boot CPUs ...
[  328.355072] CPU1: shutdown
[  328.355072] CPU1: shutdown
[  328.356170] suspend/resume: pending interrupt
[  328.362731] PM: early resume of devices complete after 0.579 msecs
[  328.363769] wakeup wake lock: event0-1791
[  328.366363] abx500-acc-det ab8500-acc-det.0: Accessory: DISCONNECTED
[  328.389099] PM: resume of devices complete after 25.165 msecs
[  328.456207] Restarting tasks ... done.
[  328.471740] suspend: exit suspend, ret = -16 (2000-01-01 00:05:34.937834009 
UTC)
[  328.479400] Enabling non-boot CPUs ...
[  328.484466] PM: Syncing filesystems ... done.
[  328.490234] Freezing user space processes ... CPU1: Booted secondary 
processor
[  328.501892] CPU1: Unknown IPI message 0x1
[  328.502716] CPU1 is up
[  328.512115] Switched to NOHz mode on CPU #1
[  328.516479] (elapsed 0.02 seconds) done.
[  328.520416] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) 
done.
[  328.539398] Suspending console(s) (use no_console_suspend to debug)
[  328.927734] PM: suspend of devices complete after 381.157 msecs
[  328.927734] suspend_set_state: ab8500-ext-supply3: No configuration
[  328.927764] suspend_set_state: ab8500-ext-supply2: No configuration
[  328.927764] suspend_set_state: ab8500-ext-supply1: No configuration
[  328.928771] PM: late suspend of devices complete after 0.976 msecs
[  328.934692] Disabling non-boot CPUs ...
[  328.935821] CPU1: shutdown
[  328.935821] CPU1: shutdown
[  328.936981] suspend/resume: pending interrupt
[  328.943542] PM: early resume of devices complete after 0.579 msecs
[  328.944458] wakeup wake lock: event0-1791
[  328.947204] abx500-acc-det ab8500-acc-det.0: Accessory: DISCONNECTED
[  328.969818] PM: resume of devices complete after 25.074 msecs
[  329.036956] Restarting tasks ... done.
[  329.052337] suspend: exit suspend, ret = -16 (2000-01-01 00:05:36.109349892 
UTC)
[  329.059814] Enabling non-boot CPUs ...
[  329.064575] PM: Syncing filesystems ... done.
[  329.069702] Freezing user space processes ... CPU1: Booted secondary 
processor
[  329.092102] CPU1: Unknown IPI message 0x1
[  329.092864] CPU1 is up
[  329.102233] Switched to NOHz mode on CPU #1
[  329.102447] (elapsed 0.02 seconds) done.
[  329.102478] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) 
done.
[  329.119842] Suspending console(s) (use no_console_suspend to debug)
[  329.508361] PM: suspend of devices complete after 381.450 msecs
[  329.508392] suspend_set_state: ab8500-ext-supply3: No configuration
[  329.508422] suspend_set_state: ab8500-ext-supply2: No configuration
[  329.508422] suspend_set_state: ab8500-ext-supply1: No configuration
[  329.509429] PM: late suspend of devices complete after 0.976 msecs
[  329.515350] Disabling non-boot CPUs ...
[  329.516448] CPU1: shutdown
[  329.516479] CPU1: shutdown
[  329.517578] suspend/resume: pending interrupt
[  329.524108] PM: early resume of devices complete after 0.549 msecs
[  329.525115] wakeup wake lock: event0-1791
[  329.527770] abx500-acc-det ab8500-acc-det.0: Accessory: DISCONNECTED
[  329.551361] PM: resume of devices complete after 26.019 msecs
[  329.618591] Restarting tasks ... done.
[  329.653167] suspend: exit suspend, ret = -16 (2000-01-01 00:05:36.709529315 
UTC)
[  329.660614] Enabling non-boot CPUs ...
[  329.665374] PM: Syncing filesystems ... done.
[  329.670562] Freezing user space processes ... CPU1: Booted secondary 
processor
[  329.692871] CPU1: Unknown IPI message 0x1
[  329.693817] CPU1 is up
[  329.703216] Switched to NOHz mode on CPU #1
[  329.703369] (elapsed 0.02 seconds) done.
[  329.703369] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) 
done.
[  329.720520] Suspending console(s) (use no_console_suspend to debug)

Original comment by kavi.0...@gmail.com on 6 Dec 2011 at 6:06