CPU Power management

[ghost]

Hello again! I'm enthusiast so I don't know much about Native Power Management, but I found some faulty things in our setup: At first, SSDT-XCPM (or PluginType if you wish) configured wrong, as KabyLake+ DSDT (and our too), got the _PR0.PR00 tree, not _PR0.CPU0 as it was configured by rehabman by default (he made notes about KabyLake+ systems). I checked in MaciASL and yeah - our DSDT is using PR00 so I guess this should be fixed. Also I don't think CPUFriend is needed with this fix, as of my AppleIntelInfo report all is okay with HWP (pure setup, almost no kext and the only patched SSDT is SSDT-XCPM) AppleIntelInfo Report:

AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x121d2d13954 (62 MHz)
MWAIT C-States...........................: 286531872

Processor Brandstring....................: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz

Processor Signature..................... : 0x806EA
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 10
 - Model................................ : 0x8E (142)

Model Specific Registers (MSRs)
------------------------------------------

MSR_IA32_PLATFORM_ID.............(0x17)  : 0x1C000000000000
------------------------------------------
 - Processor Flags...................... : 7

MSR_CORE_THREAD_COUNT............(0x35)  : 0x40008
------------------------------------------
 - Core Count........................... : 4
 - Thread Count......................... : 8

MSR_PLATFORM_INFO................(0xCE)  : 0x4043DF1011400
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x14 (2000 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 2 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 4
 - Minimum Operating Ratio.............. : 4

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E008007
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 0 (not enabled)
 - CFG Lock............................. : 1 (MSR locked until next reset)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x51814
------------------------------------------
 - LVL_2 Base Address................... : 0x1814
 - C-state Range........................ : 5 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x1E840F08F5
IA32_APERF.......................(0xE8)  : 0x2625365093

MSR_FLEX_RATIO...................(0x194) : 0x100000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x25FB00002200
------------------------------------------
 - Current Performance State Value...... : 0x2200 (3400 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0xA00
------------------------------------------
 - Target performance State Value....... : 0xA00 (1000 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
 - High-Temperature Interrupt Enable.... : 0 (disabled)
 - Low-Temperature Interrupt Enable..... : 0 (disabled)
 - PROCHOT# Interrupt Enable............ : 0 (disabled)
 - FORCEPR# Interrupt Enable............ : 0 (disabled)
 - Critical Temperature Interrupt Enable : 1 (enabled)
 - Threshold #1 Value................... : 0
 - Threshold #1 Interrupt Enable........ : 0 (disabled)
 - Threshold #2 Value................... : 0
 - Threshold #2 Interrupt Enable........ : 0 (disabled)
 - Power Limit Notification Enable...... : 0 (disabled)

IA32_THERM_STATUS................(0x19C) : 0x88302800
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 1
 - Current Limit Status................. : 0
 - Current Limit log.................... : 1
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 48
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x2640000
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 2

MSR_MISC_PWR_MGMT................(0x1AA) : 0x401CC1
------------------------------------------
 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
 - SpeedShift Technology Enable......... : 1 (enabled)
 - SpeedShift Interrupt Coordination.... : 1 (enabled)
 - SpeedShift Energy Efficient Perf..... : 1 (enabled)
 - SpeedShift Technology Setup for HWP.. : Yes (setup for HWP)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x25252828
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 28 (4000 MHz) 
 - Maximum Ratio Limit for C02.......... : 28 (4000 MHz) 
 - Maximum Ratio Limit for C03.......... : 25 (3700 MHz) 
 - Maximum Ratio Limit for C04.......... : 25 (3700 MHz) 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x5
------------------------------------------
 - Power Policy Preference...............: 5 (balanced performance and energy saving)

MSR_POWER_CTL....................(0x1FC) : 0x24005F
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x42816000DD8078
------------------------------------------
 - Package Power Limit #1............... : 15 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
 - Time Window for Power Limit #1....... : 110 (163840 milli-Seconds)
 - Package Power Limit #2............... : 44 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 0 (disabled)
 - Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x305791B
------------------------------------------
 - Total Energy Consumed................ : 3093 Joules (Watt = Joules / seconds)

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x18161F0
------------------------------------------
 - Total Energy Consumed................ : 1541 Joules (Watt = Joules / seconds)

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x1816233
------------------------------------------
 - Total Energy Consumed................ : 1541 Joules (Watt = Joules / seconds)

MSR_PP1_POWER_LIMIT..............(0x640) : 0x0

MSR_PP1_ENERGY_STATUS............(0x641) : 0x6F37C
------------------------------------------
 - Total Energy Consumed................ : 27 Joules (Watt = Joules / seconds)

MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
 - Priority Level....................... : 24

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x12
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x80050
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x1400C8
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x884E
MSR_PKGC6_IRTL...................(0x60b) : 0x8876
MSR_PKGC7_IRTL...................(0x60c) : 0x8894
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x3E469EA5A0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x76C250E07C
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x3E469EA5A0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x76C250E07C
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0
MSR_PKG_C8_RESIDENCY.............(0x630) : 0x0
MSR_PKG_C9_RESIDENCY.............(0x631) : 0x0
MSR_PKG_C10_RESIDENCY............(0x632) : 0x0
MSR_PKG_C8_LATENCY...............(0x633) : 0x0
MSR_PKG_C9_LATENCY...............(0x634) : 0x0
MSR_PKG_C10_LATENCY..............(0x635) : 0x0

MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x2188426 
------------------------------------------

MSR_PPERF........................(0x64E) : 0x2312C23A21
------------------------------------------
 - Hardware workload scalability........ : 150638574113

MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x3D000000
------------------------------------------
 - PROCHOT Status....................... : 0
 - Thermal Status....................... : 0
 - Residency State Regulation Status.... : 0
 - Running Average Thermal Limit Status. : 0
 - VR Therm Alert Status................ : 0
 - VR Therm Design Current Status....... : 0
 - Other Status......................... : 0
 - Package/Platform-Level #1 Power Limit : 0
 - Package/Platform-Level #2 Power Limit : 0
 - Max Turbo Limit Status............... : 0
 - Turbo Transition Attenuation Status.. : 0
 - PROCHOT Log.......................... : 0
 - Thermal Log.......................... : 0
 - Residency State Regulation Log....... : 0
 - Running Average Thermal Limit Log.... : 0
 - VR Therm Alert Log................... : 0
 - VR Thermal Design Current Log........ : 0
 - Other Status Log..................... : 1 (status bit has asserted)
 - Package/Platform-Level #1 Power Limit : 1 (status bit has asserted)
 - Package/Platform-Level #2 Power Limit : 1 (status bit has asserted)
 - Max Turbo Limit Log.................. : 1 (status bit has asserted)
 - Turbo Transition Attenuation Log..... : 1 (status bit has asserted)
HDC Supported

IA32_PKG_HDC_CTL.................(0xDB0) : 0x0

IA32_PM_CTL1.....................(0xDB1) : 0x1
------------------------------------------
HDC Allow Block..................(0xDB1) : 1 (HDC blocked)

IA32_THREAD_STALL................(0xDB2) : 0x0

MSR_PKG_HDC_CONFIG...............(0x652) : 0x2
------------------------------------------
Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper)
MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0

MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0

MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x121D53A278D
MSR_PPERF........................(0x63E) : 0x1 (18)

IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled)

IA32_HWP_CAPABILITIES............(0x771) : 0x1081228
-----------------------------------------
 - Highest Performance.................. : 40
 - Guaranteed Performance............... : 18
 - Most Efficient Performance........... : 8
 - Lowest Performance................... : 1

IA32_HWP_INTERRUPT...............(0x773) : 0x0
------------------------------------------
 - Guaranteed Performance Change........ : 0 (Interrupt generation disabled)
 - Excursion Minimum.................... : 0 (Interrupt generation disabled)

IA32_HWP_REQUEST................(0x774) : 0x78282804
-----------------------------------------
 - Minimum Performance................. : 4
 - Maximum Performance................. : 40
 - Desired Performance................. : 40
 - Energy Efficient Performance........ : 120
 - Activity Window..................... : 0, 0
 - Package Control..................... : 0

IA32_HWP_STATUS..................(0x777) : 0x0
-----------------------------------------
 - Guaranteed Performance Change....... : 0 (has not occured)
 - Excursion To Minimum................ : 0 (has not occured)

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  4 ( 400 MHz)
Maximum non-Turbo Ratio/Frequency........: 20 (2000 MHz)
Maximum Turbo Ratio/Frequency............: 40 (4000 MHz)

IGPU Info:
------------------------------------------
IGPU Current Frequency...................:    0 MHz
IGPU Minimum Frequency...................:  300 MHz
IGPU Maximum Non-Turbo Frequency.........:  300 MHz
IGPU Maximum Turbo Frequency.............: 1150 MHz
IGPU Maximum limit.......................: No Limit

P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (13) 22 35 ] iGPU P-States [ ]
CPU C3-Cores [ 1 4 5 ]
CPU C7-Cores [ 1 2 3 4 7 ]
CPU P-States [ (13) 22 35 ] iGPU P-States [ ]
CPU C3-Cores [ 1 2 3 4 5 ]
CPU C7-Cores [ 0 1 2 3 4 5 7 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 13 (20) 22 35 ] iGPU P-States [ ]
CPU P-States [ 13 20 22 (24) 35 ] iGPU P-States [ ]
MBP-Pavel:~ pavel$ sudo cat /tmp/AppleIntelInfo.dat
Password:
AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x121d2d13954 (62 MHz)
MWAIT C-States...........................: 286531872

Processor Brandstring....................: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz

Processor Signature..................... : 0x806EA
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 10
 - Model................................ : 0x8E (142)

Model Specific Registers (MSRs)
------------------------------------------

MSR_IA32_PLATFORM_ID.............(0x17)  : 0x1C000000000000
------------------------------------------
 - Processor Flags...................... : 7

MSR_CORE_THREAD_COUNT............(0x35)  : 0x40008
------------------------------------------
 - Core Count........................... : 4
 - Thread Count......................... : 8

MSR_PLATFORM_INFO................(0xCE)  : 0x4043DF1011400
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x14 (2000 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 2 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 4
 - Minimum Operating Ratio.............. : 4

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E008007
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 0 (not enabled)
 - CFG Lock............................. : 1 (MSR locked until next reset)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x51814
------------------------------------------
 - LVL_2 Base Address................... : 0x1814
 - C-state Range........................ : 5 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x1E840F08F5
IA32_APERF.......................(0xE8)  : 0x2625365093

MSR_FLEX_RATIO...................(0x194) : 0x100000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x25FB00002200
------------------------------------------
 - Current Performance State Value...... : 0x2200 (3400 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0xA00
------------------------------------------
 - Target performance State Value....... : 0xA00 (1000 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
 - High-Temperature Interrupt Enable.... : 0 (disabled)
 - Low-Temperature Interrupt Enable..... : 0 (disabled)
 - PROCHOT# Interrupt Enable............ : 0 (disabled)
 - FORCEPR# Interrupt Enable............ : 0 (disabled)
 - Critical Temperature Interrupt Enable : 1 (enabled)
 - Threshold #1 Value................... : 0
 - Threshold #1 Interrupt Enable........ : 0 (disabled)
 - Threshold #2 Value................... : 0
 - Threshold #2 Interrupt Enable........ : 0 (disabled)
 - Power Limit Notification Enable...... : 0 (disabled)

IA32_THERM_STATUS................(0x19C) : 0x88302800
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 1
 - Current Limit Status................. : 0
 - Current Limit log.................... : 1
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 48
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x2640000
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 2

MSR_MISC_PWR_MGMT................(0x1AA) : 0x401CC1
------------------------------------------
 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
 - SpeedShift Technology Enable......... : 1 (enabled)
 - SpeedShift Interrupt Coordination.... : 1 (enabled)
 - SpeedShift Energy Efficient Perf..... : 1 (enabled)
 - SpeedShift Technology Setup for HWP.. : Yes (setup for HWP)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x25252828
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 28 (4000 MHz) 
 - Maximum Ratio Limit for C02.......... : 28 (4000 MHz) 
 - Maximum Ratio Limit for C03.......... : 25 (3700 MHz) 
 - Maximum Ratio Limit for C04.......... : 25 (3700 MHz) 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x5
------------------------------------------
 - Power Policy Preference...............: 5 (balanced performance and energy saving)

MSR_POWER_CTL....................(0x1FC) : 0x24005F
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x42816000DD8078
------------------------------------------
 - Package Power Limit #1............... : 15 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
 - Time Window for Power Limit #1....... : 110 (163840 milli-Seconds)
 - Package Power Limit #2............... : 44 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 0 (disabled)
 - Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x305791B
------------------------------------------
 - Total Energy Consumed................ : 3093 Joules (Watt = Joules / seconds)

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x18161F0
------------------------------------------
 - Total Energy Consumed................ : 1541 Joules (Watt = Joules / seconds)

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x1816233
------------------------------------------
 - Total Energy Consumed................ : 1541 Joules (Watt = Joules / seconds)

MSR_PP1_POWER_LIMIT..............(0x640) : 0x0

MSR_PP1_ENERGY_STATUS............(0x641) : 0x6F37C
------------------------------------------
 - Total Energy Consumed................ : 27 Joules (Watt = Joules / seconds)

MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
 - Priority Level....................... : 24

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x12
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x80050
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x1400C8
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x884E
MSR_PKGC6_IRTL...................(0x60b) : 0x8876
MSR_PKGC7_IRTL...................(0x60c) : 0x8894
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x3E469EA5A0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x76C250E07C
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x3E469EA5A0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x76C250E07C
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0
MSR_PKG_C8_RESIDENCY.............(0x630) : 0x0
MSR_PKG_C9_RESIDENCY.............(0x631) : 0x0
MSR_PKG_C10_RESIDENCY............(0x632) : 0x0
MSR_PKG_C8_LATENCY...............(0x633) : 0x0
MSR_PKG_C9_LATENCY...............(0x634) : 0x0
MSR_PKG_C10_LATENCY..............(0x635) : 0x0

MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x2188426 
------------------------------------------

MSR_PPERF........................(0x64E) : 0x2312C23A21
------------------------------------------
 - Hardware workload scalability........ : 150638574113

MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x3D000000
------------------------------------------
 - PROCHOT Status....................... : 0
 - Thermal Status....................... : 0
 - Residency State Regulation Status.... : 0
 - Running Average Thermal Limit Status. : 0
 - VR Therm Alert Status................ : 0
 - VR Therm Design Current Status....... : 0
 - Other Status......................... : 0
 - Package/Platform-Level #1 Power Limit : 0
 - Package/Platform-Level #2 Power Limit : 0
 - Max Turbo Limit Status............... : 0
 - Turbo Transition Attenuation Status.. : 0
 - PROCHOT Log.......................... : 0
 - Thermal Log.......................... : 0
 - Residency State Regulation Log....... : 0
 - Running Average Thermal Limit Log.... : 0
 - VR Therm Alert Log................... : 0
 - VR Thermal Design Current Log........ : 0
 - Other Status Log..................... : 1 (status bit has asserted)
 - Package/Platform-Level #1 Power Limit : 1 (status bit has asserted)
 - Package/Platform-Level #2 Power Limit : 1 (status bit has asserted)
 - Max Turbo Limit Log.................. : 1 (status bit has asserted)
 - Turbo Transition Attenuation Log..... : 1 (status bit has asserted)
HDC Supported

IA32_PKG_HDC_CTL.................(0xDB0) : 0x0

IA32_PM_CTL1.....................(0xDB1) : 0x1
------------------------------------------
HDC Allow Block..................(0xDB1) : 1 (HDC blocked)

IA32_THREAD_STALL................(0xDB2) : 0x0

MSR_PKG_HDC_CONFIG...............(0x652) : 0x2
------------------------------------------
Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper)
MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0

MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0

MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x121D53A278D
MSR_PPERF........................(0x63E) : 0x1 (18)

IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled)

IA32_HWP_CAPABILITIES............(0x771) : 0x1081228
-----------------------------------------
 - Highest Performance.................. : 40
 - Guaranteed Performance............... : 18
 - Most Efficient Performance........... : 8
 - Lowest Performance................... : 1

IA32_HWP_INTERRUPT...............(0x773) : 0x0
------------------------------------------
 - Guaranteed Performance Change........ : 0 (Interrupt generation disabled)
 - Excursion Minimum.................... : 0 (Interrupt generation disabled)

IA32_HWP_REQUEST................(0x774) : 0x78282804
-----------------------------------------
 - Minimum Performance................. : 4
 - Maximum Performance................. : 40
 - Desired Performance................. : 40
 - Energy Efficient Performance........ : 120
 - Activity Window..................... : 0, 0
 - Package Control..................... : 0

IA32_HWP_STATUS..................(0x777) : 0x0
-----------------------------------------
 - Guaranteed Performance Change....... : 0 (has not occured)
 - Excursion To Minimum................ : 0 (has not occured)

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  4 ( 400 MHz)
Maximum non-Turbo Ratio/Frequency........: 20 (2000 MHz)
Maximum Turbo Ratio/Frequency............: 40 (4000 MHz)

IGPU Info:
------------------------------------------
IGPU Current Frequency...................:    0 MHz
IGPU Minimum Frequency...................:  300 MHz
IGPU Maximum Non-Turbo Frequency.........:  300 MHz
IGPU Maximum Turbo Frequency.............: 1150 MHz
IGPU Maximum limit.......................: No Limit

P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (13) 22 35 ] iGPU P-States [ ]
CPU C3-Cores [ 1 4 5 ]
CPU C7-Cores [ 1 2 3 4 7 ]
CPU P-States [ (13) 22 35 ] iGPU P-States [ ]
CPU C3-Cores [ 1 2 3 4 5 ]
CPU C7-Cores [ 0 1 2 3 4 5 7 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 13 (20) 22 35 ] iGPU P-States [ ]
CPU P-States [ 13 20 22 (24) 35 ] iGPU P-States [ ]
CPU P-States [ (13) 20 22 24 25 35 ] iGPU P-States [ ]
CPU P-States [ (4) 13 20 22 24 25 35 ] iGPU P-States [ ]
CPU P-States [ 4 (13) 20 22 24 25 28 35 ] iGPU P-States [ ]
CPU P-States [ 4 13 (20) 22 24 25 28 35 ] iGPU P-States [ (30) ]
CPU P-States [ 4 13 20 22 24 25 28 35 (37) ] iGPU P-States [ 30 ]
CPU P-States [ 4 13 20 22 24 25 (26) 28 35 37 ] iGPU P-States [ 30 ]
CPU P-States [ 4 13 20 22 24 25 26 28 (32) 35 37 ] iGPU P-States [ 30 ]
CPU P-States [ 4 13 20 22 (23) 24 25 26 28 32 35 37 ] iGPU P-States [ 30 ]
CPU P-States [ 4 13 20 22 23 24 25 26 28 32 (34) 35 37 ] iGPU P-States [ 30 ]
CPU P-States [ 4 13 (18) 20 22 23 24 25 26 28 32 34 35 37 ] iGPU P-States [ 30 ]
CPU P-States [ 4 13 18 20 (21) 22 23 24 25 26 28 32 34 35 37 ] iGPU P-States [ 30 ]
CPU P-States [ 4 13 18 20 21 22 23 24 25 26 28 (31) 32 34 35 37 ] iGPU P-States [ 30 ]
CPU P-States [ 4 13 18 20 21 22 23 24 25 26 28 (29) 31 32 34 35 37 ] iGPU P-States [ 30 ]
CPU P-States [ 4 13 (17) 18 20 21 22 23 24 25 26 28 29 31 32 34 35 37 ] iGPU P-States [ 30 ]
CPU P-States [ 4 13 17 18 (19) 20 21 22 23 24 25 26 28 29 31 32 34 35 37 ] iGPU P-States [ 30 ]
CPU P-States [ 4 13 17 18 19 20 21 22 23 24 25 (26) 28 29 31 32 34 35 37 ] iGPU P-States [ 30 ]

[stevezhengshiqi]

@PavelLJ Yes, my card works pretty well under Windows 10. What about this driver below? This is what they gave me. I think you need to uninstall the drivers at first that don't work. BroadcomWirelessWin8x64.exe.zip

[ghost]

@stevezhengshiqi thanks, it's working now! I can't say about your question though, looks like there is no such option.

[alexmenn]

HI @stevezhengshiqi !! I bought a brand new xiaomi notebook pro i7 with 16gb of RAM. I used your latest CLOVER folder. Everything works perfect in 10.13.6 (17G2112). But, I have poor results in geekbench. I post it too in tonymac forum. Maybe you can tell me if Im doing something wrong...

EDIT: Ok, with release "XiaoMi NoteBook Pro EFI v1.2.4", or 1.2.3, I just get 11.400 score. But, If I boot with release "XiaoMi NoteBook Pro EFI v1.2.2" I have 16.900 in geekbench. There should be something wrong in CLOVER folder related with CPU. Can you check your geekbench score and post it please? :)

debug_5875.zip

[alexmenn]

Ok, I get it. If I use XiaoMi NoteBook Pro EFI v1.2.4 with v1.2.2 CPUFriendDataProvider.kext and CPUFriend.kext (released on 13 May) instead of 1.2.4 versions, geekbench is fine again with 16.500 score in geekbench. I think the updated release and CLOVER folder of @stevezhengshiqi and @daliansky have wrong CPUFriend kext, because I cant get good score. Who can check that?

[stevezhengshiqi]

@alexmenn Issue moved to #53 @PavelLJ Hi, Could I submit you and Cyb's script in my Github? They are really great. For sure I will update the credit.

[ghost]

@stevezhengshiqi I asked about it, Cyb agreed, but it's still in testing phase as we're adding new features, for example we managed to modify Nuvoton EC ROM to get fans kicked on 55 and not on 43, feels great - laptop is silent in most cases. Also now I'm testing DVMT=64MB, so we maybe will get rid of DVMTFixup. Wait untill it will be more finished, okay? Big thanks to Cyb by the way, the patches are mostly his work while I just suggested and tested things. Russian hackers rocks 👓

[ghost]

I made a new issue in @stevezhengshiqi repository about BIOS mods, as there is additional issue for CPUFriend i think that discussion is over. Feel free to make comments here