Open theowlpo opened 10 months ago
On Sun, Sep 17, 2023 at 11:41:05AM -0700, theowlpo wrote:
Hi Team,
I bought a new RT3200 which pre-loaded firmware version is 1.2.00.360516. Following all steps described, either using the signed or unsigned, the router does not allow to upload and flash the openwrt image (downloaded from this github repo).
Is it possible to update the openwrt image so will be possible to flash the RT3200?
Thank you very much!
Hi!
may I ask you what's the image name you tried to upload (both signed and unsigned)? And what's exactly the error message you get back?
thanks, Enrico
-- Reply to this email directly or view it on GitHub: https://github.com/dangowrt/owrt-ubi-installer/issues/151 You are receiving this because you are subscribed to this thread.
Message ID: @.***>
Hi Enrico,
This was the signed image i have tried to flash: openwrt-22.03.3-mediatek-mt7622-linksys_e8450-ubi-initramfs-recovery-installer_signed.itb
unsigned: openwrt-22.03.3-mediatek-mt7622-linksys_e8450-ubi-initramfs-recovery-installer.itb
The router replied: invalid image
Both images were downloaded from here: https://github.com/dangowrt/owrt-ubi-installer/releases
Reading the vendors note from the download section, it says that downgrading from current version is not possible. Don't know if this affect openwrt images... website here: https://www.belkin.com/support-article/?articleNum=208567
Thank you!
Ok, so surprisingly things were working just fine with 1.2.00.273012 but now with 1.2.00.360516 not any more. It looks like the new firmware still uses the same GPG encryption key (which is still contained in the firmware) and even the sbin/fwupgrade
executable is still identical. To make sure we are eliminating all other possible causes for problems please make sure:
openwrt-22.03.3-mediatek-mt7622-linksys_e8450-ubi-initramfs-recovery-installer_signed.itb
I might try myself on my hardware a bit later.
Ok, so surprisingly things were working just fine with 1.2.00.273012 but now with 1.2.00.360516 not any more. It looks like the new firmware still uses the same GPG encryption key (which is still contained in the firmware) and even the
sbin/fwupgrade
executable is still identical. To make sure we are eliminating all other possible causes for problems please make sure:
- use Firefox Desktop browser for the whole procedure
- do a factory reset of the router
- make sure router is not connected to the Internet
- now upload
openwrt-22.03.3-mediatek-mt7622-linksys_e8450-ubi-initramfs-recovery-installer_signed.itb
I might try myself on my hardware a bit later.
Hi dangowrt,
I have followed your recomended steps above but no success. Router stills show same message: "The image file is incorrect".
I have tried with both openwrt imagex, signed and unsigned.
Thank you.
Ok, so surprisingly things were working just fine with 1.2.00.273012 but now with 1.2.00.360516 not any more. It looks like the new firmware still uses the same GPG encryption key (which is still contained in the firmware) and even the
sbin/fwupgrade
executable is still identical. To make sure we are eliminating all other possible causes for problems please make sure:
- use Firefox Desktop browser for the whole procedure
- do a factory reset of the router
- make sure router is not connected to the Internet
- now upload
openwrt-22.03.3-mediatek-mt7622-linksys_e8450-ubi-initramfs-recovery-installer_signed.itb
I might try myself on my hardware a bit later.
Hi Daniel,
Any news on this subject? Did you have a go in your HW? Just to make sure that is not my mistake on the procedure to flash the RT3200...
Thank you for your support.
Any news on this subject? Did you have a go in your HW?
I've tried now all the way: Restored factory flash content with Firmware 1.0.00, then updated to 1.1.01.272918 which does the switch to the new "signed" firmware format, then update to 1.2.00.360516.
From there I uploaded openwrt-22.03.3-mediatek-mt7622-linksys_e8450-ubi-initramfs-recovery-installer_signed.itb
and it worked flawlessly, OpenWrt's recovery system is greeting me seconds later.
However, for the firmware to be able to flash anything (even original vendor binaries) I had to do a factory reset while running 1.2.00.360516 and connect the router to the Internet at least once (probably for NTP to set date and time for signature verification to work...).
Restored factory flash content with Firmware 1.0.00
Thanks for the description. Just one question. How do you restore factory flash with firmware 1.0.00?
How do you restore factory flash with firmware 1.0.00?
I restore the complete content of the flash from an earlier backup. To make it easier I got the serial console connected while doing that, also so that I can see what goes wrong in case something does go wrong.
Thank you. I'll try to do it tonight.
[EDIT] dealing now with TFTP... opiton 1 from boot...
Hi Success!!!
Thank you for the support!!!
Hi Team,
I bought a new RT3200 which pre-loaded firmware version is 1.2.00.360516. Following all steps described, either using the signed or unsigned, the router does not allow to upload and flash the openwrt image (downloaded from this github repo).
Is it possible to update the openwrt image so will be possible to flash the RT3200?
Thank you very much!