Open JoeToeniskoetter opened 5 years ago
Having the same issue:
16.774999618530273 -8.684399604797363 -5.259200096130371 16.5802001953125 -8.912799835205078 -7.584199905395508 -2.6602001190185547 -15.50100040435791 -61.790199279785156 1.4910000562667847
I verified that it's not a sensor problem with a python hx711 library which worked fine. Any suggestions would be much appreciated. Thank you!
Did you solve the Problem? I have got the same.
Did you solve the Problem? I have got the same.
@Swompet
Yes I did end up fixing my issues Which were caused by incorrect wiring. Double and triple check your wiring. It can be very easy to mess up and connect the wires incorrectly.
@JoeToeniskoetter The thing is this works fine with a python script. What wiring did you mess up?
@Swompet The wires connecting my 4 load cells into a Wheatstone bridge were wrong. So when using your python script you are getting correct readings from the hx711?
@JoeToeniskoetter Yes in python it works fine. did you do anything with the bit order?
I was able to fix this. I was a pin issue. But now I am not able to calibrate the cell or tare it. this is my output: at some point i pressed tare. Units : 28202.230469 | Offset: 0 Units : 31721.539062 | Offset: 0 Units : 28193.691406 | Offset: 0 Units : 35236.230469 | Offset: 0 Units : 35232.460938 | Offset: 0 Units : 35231.308594 | Offset: 0 Units : 35230.769531 | Offset: 0 Units : 35228.691406 | Offset: 0 Units : 35228.847656 | Offset: 0 Units : 35230.769531 | Offset: 0 //////////at this point i pressed the tare button Units : 1.615385 | Offset: -458029 Units : 4.153846 | Offset: -458029 Units : 6.461538 | Offset: -458029 Units : 10.769231 | Offset: -458029 Units : -3507.538574 | Offset: -458029 Units : 28.384615 | Offset: -458029 Units : 26.769230 | Offset: -458029 Units : 30.769230 | Offset: -458029 Units : 37.769230 | Offset: -458029 Units : 41.384617 | Offset: -458029 Units : 46.538460 | Offset: -458029 Units : 49.076923 | Offset: -458029 Units : 54.923077 | Offset: -458029 Units : 56.846153 | Offset: -458029 Units : 64.230766 | Offset: -458029 Units : -3461.846191 | Offset: -458029 Units : 70.769234 | Offset: -458029 Units : 70.076920 | Offset: -458029 Units : 76.769234 | Offset: -458029 Units : 78.230766 | Offset: -458029 Units : 82.384613 | Offset: -458029 Units : 82.153847 | Offset: -458029 Units : 84.384613 | Offset: -458029 Units : 82.692307 | Offset: -458029 Units : 81.000000 | Offset: -458029 Units : 82.076920 | Offset: -458029 Units : -3445.923096 | Offset: -458029 Units : 85.923080 | Offset: -458029 Units : 87.307693 | Offset: -458029 Units : -3444.692383 | Offset: -458029 Units : -3440.769287 | Offset: -458029 Units : 90.307693 | Offset: -458029 Units : 17745.691406 | Offset: -367384 Units : 7061.538574 | Offset: -367384 Units : 7034.077148 | Offset: -367384 Units : 23.769230 | Offset: -366992
I am using the proved example and I am getting readings on the screen however, my readings are very erratic. Here is what I get in the console when running the example code: 0.0575999990105629 0.003599999938160181 -2.8401999473571777 0.00800000037997961 0.04340000078082085 0.05620000138878822 -1.393399953842163 0.016599999740719795 2.8845999240875244 2.8296000957489014 -1.4026000499725342
Any help would be appreciated. Thanks!