Open m00nsp3ll opened 4 years ago
danheeks
commented
4 years ago see in vario/bmp180piezo/bmp180piezo.ino
/* Hardware connections:
Also, I am connecting 3 x AA alkaline batteries via an on/off swithch to the 5V and GND on the arduino nano.
Is this enough?
m00nsp3ll
commented
4 years ago thank you for the reply,
which pins should i wire the Piezo buzzer.
Regards,
On Sat, 15 Feb 2020 at 12:56, danheeks notifications@github.com wrote:
see in vario/bmp180piezo/bmp180piezo.ino
/* Hardware connections:
(GND) to GND
(VDD) to 3.3V SCL to A5 SDA to A4 */
Also, I am connecting 3 x AA alkaline batteries via an on/off swithch to the 5V and GND on the arduino nano.
Is this enough?
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/danheeks/vario/issues/2?email_source=notifications&email_token=AAWYWFSG6OZX5HPNKX6QNKLRC634BA5CNFSM4KVXA57KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEL3GQQI#issuecomment-586573889, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAWYWFVOXKLAAAFQ5HQG7BDRC634BANCNFSM4KVXA57A .
-- Harun Sivaslı
danheeks
commented
4 years ago D9 and D10 to the Piezo Buzzer. I've just added a comment to the source code.
m00nsp3ll
commented
4 years ago thank you very much, i am going to build it and test.
regards
On Sun, 16 Feb 2020 at 11:45, danheeks notifications@github.com wrote:
D9 and D10 to the Piezo Buzzer. I've just added a comment to the source code.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/danheeks/vario/issues/2?email_source=notifications&email_token=AAWYWFSU2IWQUVBBNNJWOWDRDD4LLA5CNFSM4KVXA57KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEL4A67A#issuecomment-586682236, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAWYWFX226U5GABQNW5QQS3RDD4LLANCNFSM4KVXA57A .
-- Harun Sivaslı
Hello, im going to build your vario but i need wiring scheme. Could you please share it.
Regards,