BROLL Displays Always 10% as position

Pitjupp111 commented 1 month ago

I agree to the following

[X] I have read the documentation right now
[X] I have read the FAQs right now
[X] I am aware of the latest release notes
[X] I am aware that an integration that was installed via HACS also needs to be updated via HACS
[X] The Backend (CCU/Homegear/...) is working as expected, devices are taught in and are controllable by its own UI.
[X] I am running the latest version of the custom_component (and Home Assistant)

The problem

I just got a BROLL for my awning. The installation and configuration at my CCU3 works fine. The new device is already available in the Homematic local integration. The only problem I have is, that the position is always shown with 10%. The awning Drives well at every position, but the Display value stays at 10. Do you have any idea? Thanks Peter

What version of HomematicIP (local) has the issue?

1.61.1

What was the last working version of HomematicIP (local)?

1.63.1

What type of installation are you running?

Home Assistant OS

What type of installation are you running for your homematic backend?

RaspberryMatic Standalone

Which version of your homematic backend are you running?

3.77.6

What hardware are you running for your system?

No response

Which config details do you use

[ ] TLS
[ ] callback data (see)

Which interfaces do you use?

[X] Homematic IP
[X] Homematic (Bidcos-RF)
[ ] Groups (Heating-Group)
[ ] BidCos-Wired (HM-Wired)

Diagnostics information (no logs here)

error_log-1.txt

Log file extract. Anything in the logs that might be useful for us? The log (Setting/System/Logs -> load full log) is the best source to support trouble shooting!

No response

Additional information

No response

SukramJ commented 1 month ago

I refuse to look at logs from several days that are full of errors that have nothing to do with this integration.

Please delete the existing logs and restart HA with only this integration enabled for debug. Other integration that still throw errors should be disabled to avoid a log pollution.

Before you start you should reboot your CCU.

1.61.1 is the latest version for you that works? I basically don‘t think this is an issue with this integration.

Pitjupp111 commented 1 month ago

I'm sorry for that logfile. Because I'm a really newby at HA, I didn't look for that. When I'm able to cleanup the File, I'll send it again.

Thanks for your assistant. Peter

Am 25. Juli 2024, 23:07, um 23:07, SukramJ @.***> schrieb:

I refuse to look at logs from several days that are full of errors that have nothing to do with this integration.

Please delete the existing logs and restart HA with only this integration enabled for debug. Other integration that still throw errors should be disabled to avoid a log pollution.

Before you start you should reboot your CCU.

1.61.1 is the latest version for you that works? I basically don‘t think this is an issue with this integration.

-- Reply to this email directly or view it on GitHub: https://github.com/danielperna84/hahomematic/issues/1618#issuecomment-2251396968 You are receiving this because you authored the thread.

Message ID: @.***>

SukramJ commented 1 month ago

When I'm able to cleanup the File, I'll send it again.

Please don't cleanup the existing file. Just delete the log and restart HA and CCU as described above.

If the problem exists afterwards, attach a new log and reopen this issue

danielperna84 / hahomematic