search

danjulio / tCam

Thermal imaging cameras based on the ESP32 and Lepton 3.5
GNU General Public License v3.0
101 stars 25 forks source link

Enclosure errors #8

Closed zharijs closed 1 year ago

zharijs commented 1 year ago

tCam-mini v4 boards from Digikey does not fit the enclosure correctly. Both - USB connector and sensor holes have a gross offset.

danjulio commented 1 year ago

What specific STL files did you use? There are files also for the v2 boards and Zeke's enclosure was also for v2. The v4 files have been printed successfully quite a lot...

zharijs commented 1 year ago

I made my own, but took these as base for hole locations: https://github.com/danjulio/tCam/tree/main/tCam-Mini/enclosure/tcam_mini_basic/tcam_mini_basic

To be honest, I might have used the "bezel" file in 180 degree rotation. Not sure about that. But still, USB hole seems to be 1mm offset.

Anyway - you can add link or just copy my files to your repo. Just tested - all holes in place and it's GoPro compatible. Also has STEP and original Rhino project:

https://github.com/zharijs/Enclosures/tree/main/tCam%20enclosure

H.

danjulio commented 1 year ago

Harry,

I finally had a minute and I updated the repo and hackaday.io project entry to show off your fantastic enclosures and give you a shout-out. Much better than mine. Thank you so much for sharing these.

Regards, Dan

zharijs commented 11 months ago

Glad to give back to community :)