search

daredevilbear / open-hardware-monitor

Automatically exported from code.google.com/p/open-hardware-monitor
0 stars 0 forks source link

Gigabyte boards #357

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
Does the program give accurate readings  for a gigabyte board?Its a ga-880d2h.I 
think thats the board.I am not sure.

Original issue reported on code.google.com by leigh92...@gmail.com on 30 Jun 2012 at 10:51

GoogleCodeExporter commented 9 years ago 
We currently do not have a mainboard specific configuration for that board.

Original comment by moel.mich on 1 Jul 2012 at 2:41

GoogleCodeExporter commented 9 years ago 
Should the reading be correct?One of the temps says 185 degrees and the other 
three are 105-120.What sensor would give such a high temp reading?My machine is 
fine and runs very good.It just scares me to see such a high temp on the one 
sensor.

Original comment by leigh92...@gmail.com on 1 Jul 2012 at 4:10

GoogleCodeExporter commented 9 years ago 
I thought you are talking about voltages, because they are usually read 
correctly, but without the mainboard specific configuration they can't be 
displayed correctly scaled.

Temperatures should be correct in general (except for unused sensor channels).

Can you attach a report created with File -> Save Report... ?

Original comment by moel.mich on 1 Jul 2012 at 4:14

GoogleCodeExporter commented 9 years ago 
Im sure i could.I will give it a whirl.

Original comment by leigh92...@gmail.com on 1 Jul 2012 at 4:21