search

darkspr1te / mkstft35_bl_vet_fsmc

Open source bootloader for MKSTFT35 V1 only
4 stars 0 forks source link

Does not flash #2

Open karabas2011 opened 4 years ago

karabas2011 commented 4 years ago

I tried last version. It does not flash anything:mkstft35.bin or mkstft25-u.bin


Jump Address Value 805c81d
SD CARD detected 0
FAT FS Link Driver OK
exit

Booting
Software version: 0.1
Board Build: "MKSTFT3.5-V1"
Loader Variant: iz3man loader
about to setup sd-card
SD Card Open Success
unknown flash error 0
unknown flash error 0

Boot application

working with un-encrypted mks firmware_run
Stack Address 800c000
Jump Address 800c004
Stack Address Value 20016dc0
Jump Address Value 805c81d
darkspr1te commented 4 years ago

thanks for the feedback, will look into that, from the error it seems to be a filename issue (in the code )

karabas2011 commented 4 years ago

Now it flashes unencrypted successfully but blackscreen when flashing encrypted.

karabas2011 commented 4 years ago

Any news?

darkspr1te commented 4 years ago

Not yet, my unit is stuck at customs and has been for four weeks now, have done all i can until the unit arrives to i can fix the last few bugs and the push the BTT marlin touch build as well.

karabas2011 commented 4 years ago

Are you plan to port btt to mks tft35?

karabas2011 commented 4 years ago

Any news?

darkspr1te commented 4 years ago

Sadly no update, my unit was lost in customs/shipping and have had to re-order a replacement. basic support for thw stm32f407 has now been added to official BTT since the re-structuring but I dont have a unit to test on yet.

karabas2011 commented 4 years ago

what country?

darkspr1te commented 4 years ago

ordered from UK to ship to Zambia.

karabas2011 commented 4 years ago

Why don't aliexpress? 21$

darkspr1te commented 4 years ago

Why don't aliexpress? 21$

they dont ship direct here(Zambia), local regulations and stuff prohibit it. I also had to use personal funds to buy the unit which limit my source shipper.

karabas2011 commented 4 years ago

I can try to send you from Moscow. It seems possible

darkspr1te commented 4 years ago

that would be very handy, i can give you email details so i can provide a shipping address.

karabas2011 commented 4 years ago

PM me yur_vol at yahoo.com