Closed chrismarine74 closed 7 months ago
wifi seems a bit inconsistent, its working for some, but not others. I need to take another look at this.
Where abouts are you running reboot
from? it seems to work here when run from the host shell, and also UI works here as well.
This is related to the configuration of the DTS file, you can contact the eWeLink team - they will tell you that you can change an IO level setting to make the WiFi module work more stable (They updated this part in the eWeLink CUBE V1.12 release). In addition, it is recommended to reduce the communication rate with the WiFi module to 10M instead of 25M
they contacted me about a changed voltage level, but didnt provide any detail as to why!
Where abouts are you running
reboot
from? it seems to work here when run from the host shell, and also UI works here as well.
good morning, thanks for the support ,as for the reboot command, I run it from the ui of the haos operating system thanks regards
edit : finally I made a mistake, for the system reboot procedure, I had to wait , about 3-4 minutes for the process to complete
can you try this build and see if wifi is working now? https://github.com/darkxst/ha-operating-system/suites/18904841141/artifacts/1103966635
unfortunately I try this build in attachment but not solve the issue of wifi, thanks again for the support I appreciated
I have one more possible fix to try, will push another image soon.
Here is another build to try and fix wifi. Let me know if it helps! https://github.com/darkxst/ha-operating-system/actions/runs/7295932096/artifacts/1130501332
There hasn't been any activity on this issue recently. To keep our backlog manageable we have to clean old issues, as many of them have already been resolved with the latest updates. Please make sure to update to the latest Home Assistant OS version and check if that solves the issue. Let us know if that works for you by adding a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thank you for your contributions.
i was successful install haos Hardware: iHost (AIBridge-26) Operating System 11.1.rc2 in the emmc and move data transfer to the sd, this from the first method ! all its perfect expt I would like to highlight two things that I found, the first is that while bluetooth works ok the wifi network does not work, only eth0 is visible in the system network. The second thing is when you run the reboot command, the system shuts down and you need to start it manually thank you for the very good work on the project