youkorr
commented
1 year ago for me everything works
Closed riddik14 closed 12 months ago
youkorr
commented
1 year ago for me everything works
youkorr
commented
1 year ago did you follow the tutorial correctly?
darkxst
commented
1 year ago @riddik14
boot.img.xz - installer not start, serial over usb yes
How did you enter maskROM mode? if you are using the internal maskrom pins, you need to short these only for a few seconds at boot. if they are shorted for too long (or permanently) the eMMC wont be available to flash.
The installer runs automatically and takes about 3-5mins to complete (provided eMMC is available). You can connect to the debug console and get logs from journalctl to see what is actually happening.
haos_ihost-11.1.img.xz - on sd card not start
This has been extensively tested at this point, either erase the eMMC flash or permanently short the internal maskROM pins so iHost always boots off SD Card.
Make sure you are connected to ethernet and allow about 10mins for the landing page to become active (it has to download a bunch of containers first) at http://homeassistant.local:8123
riddik14
commented
1 year ago flashing boot img after 4 minutes led blue. reboot but not load, no ping.
i have ihost 2gb ram
darkxst
commented
1 year ago the led only turns blue on successful flash, so that should be good.
The ihost will get a new IP address compared to the stock OS, as the MAC address will change.
You can login to the debug console over USB?
i have ihost 2gb ram
Not sure about performance of the 2GB model as its only dual core, but it should still work (especially given the installer completed!)
riddik14
commented
1 year ago debug usb work only on boot version . to rebbot ihost go il reboot loop. i see from activity led on switch
riddik14
commented
1 year ago can you create version for 2gb dual core? in log i see error for cpu on boot
darkxst
commented
1 year ago can you post the logs showing the error?
riddik14
commented
1 year ago this log have to blue led on boot image
`
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
mmcblk0 179:0 0 7.3G 0 disk
|-mmcblk0p1 179:1 0 16M 0 part
|-mmcblk0p2 179:2 0 24M 0 part
|-mmcblk0p3 179:3 0 256M 0 part
|-mmcblk0p4 179:4 0 24M 0 part
|-mmcblk0p5 179:5 0 256M 0 part
|-mmcblk0p6 179:6 0 8M 0 part
|-mmcblk0p7 179:7 0 96M 0 part
-mmcblk0p8 179:8 0 6.6G 0 part mmcblk0boot0 179:32 0 4M 1 disk mmcblk0boot1 179:64 0 4M 1 disk mmcblk1 179:96 0 29.7G 0 disk |-mmcblk1p1 179:97 0 82K 0 part |-mmcblk1p2 179:98 0 748.5K 0 part |-mmcblk1p3 179:99 0 32M 0 part -mmcblk1p4 179:100 0 256M 0 part /mnt/data
zram0 254:0 0 0B 0 disk
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Linux version 6.1.56 (tim@xps1520) (arm-buildroot-linux-gnueabihf-gcc.br_real (Buildroot -gf9aec31eef-dirty) 11.4.0, GNU ld (GNU Binutils) 2.38) #1 SMP Wed Oct 25 21:29:25 AEDT 2023
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Sonoff iHost
[ 0.000000] earlycon: uart8250 at MMIO32 0xff570000 (options ‘’)
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 32 MiB at 0x7e000000
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] HighMem [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000083fffff]
[ 0.000000] node 0: [mem 0x000000000a400000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 12 pages/cpu s19348 r8192 d21612 u49152
[ 0.000000] pcpu-alloc: s19348 r8192 d21612 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 513792
[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff570000 console=ttyS2,1500000n8
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1976404K/2064384K available (10240K kernel code, 720K rwdata, 2428K rodata, 1024K init, 267K bss, 55212K reserved, 32768K cma-reserved, 1015808K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000753] Switching to timer-based delay loop, resolution 41ns
[ 0.001647] Failed to get pclk for ‘rk_timer’
[ 0.002516] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.003480] CPU: Testing write buffer coherency: ok
[ 0.003982] pid_max: default: 4096 minimum: 301
[ 0.004498] LSM: Security Framework initializing
[ 0.005047] AppArmor: AppArmor initialized
[ 0.005551] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.006272] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.008243] /cpus/cpu@f00 missing clock-frequency property
[ 0.008791] /cpus/cpu@f01 missing clock-frequency property
[ 0.009319] /cpus/cpu@f02 missing clock-frequency property
[ 0.009888] /cpus/cpu@f03 missing clock-frequency property
[ 0.010410] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.011960] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.012638] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.013395] Setting up static identity map for 0x100000 - 0x100060
[ 0.014125] rcu: Hierarchical SRCU implementation.
[ 0.014573] rcu: Max phase no-delay instances is 1000.
[ 0.015710] smp: Bringing up secondary CPUs …
[ 0.017772] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.018573] CPU2: failed to boot: -95
[ 0.020303] CPU3: failed to boot: -95
[ 0.020708] smp: Brought up 1 node, 2 CPUs
[ 0.021096] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.021672] CPU: All CPU(s) started in SVC mode.
[ 0.022892] devtmpfs: initialized
[ 0.029164] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.030162] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.031080] futex hash table entries: 16 (order: -2, 1024 bytes, linear)
[ 0.033191] pinctrl core: initialized pinctrl subsystem
[ 0.035284] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.037281] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.038584] audit: initializing netlink subsys (disabled)
[ 0.039339] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1
[ 0.040378] thermal_sys: Registered thermal governor ‘step_wise’
[ 0.040391] thermal_sys: Registered thermal governor ‘user_space’
[ 0.041022] cpuidle: using governor menu
[ 0.042101] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.042852] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.046712] rockchip-pm-domain ff3e0000.power-management:power-controller: power-domain: failed to get clk at index 0: -517
[ 0.047756] rockchip-pm-domain ff3e0000.power-management:power-controller: failed to handle node power-domain: -517
[ 0.074937] cryptd: max_cpu_qlen set to 1000
[ 0.076502] reg-fixed-voltage regulator-vcc5v0-sys: GPIO lookup for consumer (null)
[ 0.076521] reg-fixed-voltage regulator-vcc5v0-sys: using device tree for GPIO lookup
[ 0.076541] of_get_named_gpiod_flags: can’t parse ‘gpios’ property of node ‘/regulator-vcc5v0-sys[0]’
[ 0.076573] of_get_named_gpiod_flags: can’t parse ‘gpio’ property of node ‘/regulator-vcc5v0-sys[0]’
[ 0.076595] reg-fixed-voltage regulator-vcc5v0-sys: using lookup tables for GPIO lookup
[ 0.076605] reg-fixed-voltage regulator-vcc5v0-sys: No GPIO consumer (null) found
[ 0.077010] iommu: Default domain type: Translated
[ 0.077472] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.078390] SCSI subsystem initialized
[ 0.079025] usbcore: registered new interface driver usbfs
[ 0.079585] usbcore: registered new interface driver hub
[ 0.080122] usbcore: registered new device driver usb
[ 0.080710] mc: Linux media interface: v0.10
[ 0.081172] pps_core: LinuxPPS API ver. 1 registered
[ 0.081635] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.082528] PTP clock support registered
[ 0.083454] Advanced Linux Sound Architecture Driver Initialized.
[ 0.084696] Bluetooth: Core ver 2.22
[ 0.085080] NET: Registered PF_BLUETOOTH protocol family
[ 0.085575] Bluetooth: HCI device and connection manager initialized
[ 0.086171] Bluetooth: HCI socket layer initialized
[ 0.086630] Bluetooth: L2CAP socket layer initialized
[ 0.087116] Bluetooth: SCO socket layer initialized
[ 0.088278] clocksource: Switched to clocksource arch_sys_counter
[ 0.089727] AppArmor: AppArmor Filesystem Enabled
[ 0.092062] NET: Registered PF_INET protocol family
[ 0.092777] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.096128] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.096931] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.097660] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.098494] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.099410] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.100130] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.100796] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.101710] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.102876] Unpacking initramfs…
[ 0.111767] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.114239] Initialise system trusted keyrings
[ 0.115186] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.121957] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.236597] Key type asymmetric registered
[ 0.237012] Asymmetric key parser ‘x509’ registered
[ 0.237697] bounce: pool size: 64 pages
[ 0.238195] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.239194] io scheduler mq-deadline registered
[ 0.239629] io scheduler kyber registered
[ 0.240200] io scheduler bfq registered
[ 0.267774] dma-pl330 ff4e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.268525] dma-pl330 ff4e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 0.270617] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 0.274607] dw-apb-uart ff560000.serial: GPIO lookup for consumer rs485-term
[ 0.274632] dw-apb-uart ff560000.serial: using device tree for GPIO lookup
[ 0.274654] of_get_named_gpiod_flags: can’t parse ‘rs485-term-gpios’ property of node ‘/serial@ff560000[0]’
[ 0.274689] of_get_named_gpiod_flags: can’t parse ‘rs485-term-gpio’ property of node ‘/serial@ff560000[0]’
[ 0.274712] dw-apb-uart ff560000.serial: using lookup tables for GPIO lookup
[ 0.274724] dw-apb-uart ff560000.serial: No GPIO consumer rs485-term found
[ 0.274763] ff560000.serial: ttyS0 at MMIO 0xff560000 (irq = 35, base_baud = 1500000) is a 16550A
[ 0.275880] serial serial0: tty port ttyS0 registered
[ 0.277559] dw-apb-uart ff570000.serial: GPIO lookup for consumer rs485-term
[ 0.277580] dw-apb-uart ff570000.serial: using device tree for GPIO lookup
[ 0.277602] of_get_named_gpiod_flags: can’t parse ‘rs485-term-gpios’ property of node ‘/serial@ff570000[0]’
[ 0.277633] of_get_named_gpiod_flags: can’t parse ‘rs485-term-gpio’ property of node ‘/serial@ff570000[0]’
[ 0.277657] dw-apb-uart ff570000.serial: using lookup tables for GPIO lookup
[ 0.277667] dw-apb-uart ff570000.serial: No GPIO consumer rs485-term found
[ 0.277706] ff570000.serial: ttyS2 at MMIO 0xff570000 (irq = 36, base_baud = 1500000) is a 16550A
[ 0.278747] printk: console [ttyS2] enabled
[ 0.279515] printk: bootconsole [uart8250] disabled
[ 0.281684] dw-apb-uart ff580000.serial: GPIO lookup for consumer rs485-term
[ 0.281707] dw-apb-uart ff580000.serial: using device tree for GPIO lookup
[ 0.281729] of_get_named_gpiod_flags: can’t parse ‘rs485-term-gpios’ property of node ‘/serial@ff580000[0]’
[ 0.281761] of_get_named_gpiod_flags: can’t parse ‘rs485-term-gpio’ property of node ‘/serial@ff580000[0]’
[ 0.281784] dw-apb-uart ff580000.serial: using lookup tables for GPIO lookup
[ 0.281795] dw-apb-uart ff580000.serial: No GPIO consumer rs485-term found
[ 0.281833] ff580000.serial: ttyS3 at MMIO 0xff580000 (irq = 37, base_baud = 1500000) is a 16550A
[ 0.283849] dw-apb-uart ff590000.serial: GPIO lookup for consumer rs485-term
[ 0.283871] dw-apb-uart ff590000.serial: using device tree for GPIO lookup
[ 0.283892] of_get_named_gpiod_flags: can’t parse ‘rs485-term-gpios’ property of node ‘/serial@ff590000[0]’
[ 0.283921] of_get_named_gpiod_flags: can’t parse ‘rs485-term-gpio’ property of node ‘/serial@ff590000[0]’
[ 0.283945] dw-apb-uart ff590000.serial: using lookup tables for GPIO lookup
[ 0.283955] dw-apb-uart ff590000.serial: No GPIO consumer rs485-term found
[ 0.283991] ff590000.serial: ttyS4 at MMIO 0xff590000 (irq = 38, base_baud = 1500000) is a 16550A
[ 0.296320] loop: module loaded
[ 0.297356] zram: Added device: zram0
[ 0.299237] mdio_bus fixed-0: GPIO lookup for consumer reset
[ 0.299259] mdio_bus fixed-0: using lookup tables for GPIO lookup
[ 0.299270] mdio_bus fixed-0: No GPIO consumer reset found
[ 0.299316] tun: Universal TUN/TAP device driver, 1.6
[ 0.303159] usbcore: registered new interface driver usb-storage
[ 0.303817] usbcore: registered new interface driver usbserial_generic
[ 0.304432] usbserial: USB Serial support registered for generic
[ 0.305182] UDC core: g_serial: couldn’t find an available UDC
[ 0.305916] i2c_dev: i2c /dev entries driver
[ 0.307633] dw-apb-uart ff560000.serial: Failed to create device link (0x180) with 0-0020
[ 0.308506] i2c 0-0020: Fixed dependency cycle(s) with /i2c@ff3f0000/pmic@20/regulators/DCDC_REG4
[ 0.309314] i2c 0-0020: Fixed dependency cycle(s) with /i2c@ff3f0000/pmic@20/regulators/DCDC_REG5
[ 0.310216] i2c 0-0020: Fixed dependency cycle(s) with /i2c@ff3f0000/pmic@20/pinctrl_rk8xx/rk817_slppin_rst
[ 0.311098] i2c 0-0020: Fixed dependency cycle(s) with /i2c@ff3f0000/pmic@20/pinctrl_rk8xx/rk817_slppin_pwrdn
[ 0.312013] i2c 0-0020: Fixed dependency cycle(s) with /i2c@ff3f0000/pmic@20/pinctrl_rk8xx/rk817_slppin_slp
[ 0.314829] Driver for 1-wire Dallas network protocol.
[ 0.316461] dw_wdt ff680000.watchdog: No valid TOPs array specified
[ 0.318026] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 0.319486] Bluetooth: HCI UART driver ver 2.3
[ 0.319902] Bluetooth: HCI UART protocol H4 registered
[ 0.320442] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 0.320611] hci_uart_h5 serial0-0: GPIO lookup for consumer enable
[ 0.321010] hci_uart_h5 serial0-0: using device tree for GPIO lookup
[ 0.321039] hci_uart_h5 serial0-0: No GPIO consumer enable found
[ 0.321403] Synopsys Designware Multimedia Card Interface Driver
[ 0.328886] IPVS: Registered protocols ()
[ 0.329314] IPVS: Connection hash table configured (size=4096, memory=16Kbytes)
[ 0.330172] IPVS: ipvs loaded.
[ 0.330465] IPVS: [rr] scheduler registered.
[ 0.331546] NET: Registered PF_INET6 protocol family
[ 0.333708] Segment Routing with IPv6
[ 0.334130] In-situ OAM (IOAM) with IPv6
[ 0.334697] NET: Registered PF_PACKET protocol family
[ 0.335221] NET: Registered PF_KEY protocol family
[ 0.335743] Bridge firewalling registered
[ 0.336178] Registering SWP/SWPB emulation handler
[ 3.143427] Freeing initrd memory: 20640K
[ 3.156746] Loading compiled-in X.509 certificates
[ 3.157861] zswap: loaded using pool lz4/zsmalloc
[ 3.160903] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.193399] gpio gpiochip0: (gpio0): added GPIO chardev (254:0)
[ 3.193527] gpio gpiochip0: registered GPIOs 0 to 31 on gpio0
[ 3.193547] gpio gpiochip0: (gpio0): created GPIO range 0->31 ==> pinctrl PIN 0->31
[ 3.193600] rockchip-gpio ff460000.gpio: probed /pinctrl/gpio@ff460000
[ 3.194627] gpio gpiochip1: (gpio1): added GPIO chardev (254:1)
[ 3.194733] gpio gpiochip1: registered GPIOs 32 to 63 on gpio1
[ 3.194750] gpio gpiochip1: (gpio1): created GPIO range 0->31 ==> pinctrl PIN 32->63
[ 3.194789] rockchip-gpio ff620000.gpio: probed /pinctrl/gpio@ff620000
[ 3.195504] dw-apb-uart ff560000.serial: Failed to create device link (0x180) with ff620000.gpio
[ 3.196745] gpio gpiochip2: (gpio2): added GPIO chardev (254:2)
[ 3.196851] gpio gpiochip2: registered GPIOs 64 to 95 on gpio2
[ 3.196869] gpio gpiochip2: (gpio2): created GPIO range 0->31 ==> pinctrl PIN 64->95
[ 3.196908] rockchip-gpio ff630000.gpio: probed /pinctrl/gpio@ff630000
[ 3.197942] gpio gpiochip3: (gpio3): added GPIO chardev (254:3)
[ 3.198040] gpio gpiochip3: registered GPIOs 96 to 127 on gpio3
[ 3.198057] gpio gpiochip3: (gpio3): created GPIO range 0->31 ==> pinctrl PIN 96->127
[ 3.198095] rockchip-gpio ff640000.gpio: probed /pinctrl/gpio@ff640000
[ 3.199149] gpio gpiochip4: (gpio4): added GPIO chardev (254:4)
[ 3.199247] gpio gpiochip4: registered GPIOs 128 to 129 on gpio4
[ 3.199264] gpio gpiochip4: (gpio4): created GPIO range 0->1 ==> pinctrl PIN 128->129
[ 3.199303] rockchip-gpio ff650000.gpio: probed /pinctrl/gpio@ff650000
[ 3.200136] reg-fixed-voltage vcc5v0-host-regulator: GPIO lookup for consumer (null)
[ 3.200150] reg-fixed-voltage vcc5v0-host-regulator: using device tree for GPIO lookup
[ 3.200170] of_get_named_gpiod_flags: can’t parse ‘gpios’ property of node ‘/vcc5v0-host-regulator[0]’
[ 3.200207] of_get_named_gpiod_flags: parsed ‘gpio’ property of node ‘/vcc5v0-host-regulator[0]’ - status (0)
[ 3.200243] gpio gpiochip0: Persistence not supported for GPIO 14
[ 3.200692] rockchip-usb2phy-naneng ff4c0000.usb2phy: GPIO lookup for consumer vup
[ 3.200708] rockchip-usb2phy-naneng ff4c0000.usb2phy: using device tree for GPIO lookup
[ 3.200732] of_get_named_gpiod_flags: parsed ‘vup-gpios’ property of node ‘/usb2phy@ff4c0000[0]’ - status (0)
[ 3.200764] gpio gpiochip0: Persistence not supported for GPIO 17
[ 3.201455] phy phy-ff4c0000.usb2phy.0: Failed to get VBUS supply regulator
[ 3.203886] rockchip-usb2phy-naneng ff4c8000.usb2phy: GPIO lookup for consumer vup
[ 3.203904] rockchip-usb2phy-naneng ff4c8000.usb2phy: using device tree for GPIO lookup
[ 3.203925] of_get_named_gpiod_flags: can’t parse ‘vup-gpios’ property of node ‘/usb2phy@ff4c8000[0]’
[ 3.203953] of_get_named_gpiod_flags: can’t parse ‘vup-gpio’ property of node ‘/usb2phy@ff4c8000[0]’
[ 3.203975] rockchip-usb2phy-naneng ff4c8000.usb2phy: using lookup tables for GPIO lookup
[ 3.203986] rockchip-usb2phy-naneng ff4c8000.usb2phy: No GPIO consumer vup found
[ 3.213102] g_serial gadget.0: Gadget Serial v2.4
[ 3.213545] g_serial gadget.0: g_serial ready
[ 3.218118] rk808 0-0020: chip id: 0x8090
[ 3.220453] ehci-platform ffe00000.usb: EHCI Host Controller
[ 3.220470] ohci-platform ffe10000.usb: Generic Platform OHCI controller
[ 3.220504] ohci-platform ffe10000.usb: new USB bus registered, assigned bus number 1
[ 3.221002] ehci-platform ffe00000.usb: new USB bus registered, assigned bus number 2
[ 3.223251] ohci-platform ffe10000.usb: irq 54, io mem 0xffe10000
[ 3.224169] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.224186] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.224295] ehci-platform ffe00000.usb: irq 53, io mem 0xffe00000
[ 3.225885] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.225900] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.226941] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.226954] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.227992] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.228005] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.229052] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.229065] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.230103] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.230116] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.231154] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.231167] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.232304] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.232317] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.233320] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.233333] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.234443] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.234456] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.234972] ehci-platform ffe00000.usb: USB 2.0 started, EHCI 1.00
[ 3.235913] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 3.236666] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.237313] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.237322] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.237341] usb usb2: Product: EHCI Host Controller
[ 3.237789] usb usb2: Manufacturer: Linux 6.1.56 ehci_hcd
[ 3.238307] usb usb2: SerialNumber: ffe00000.usb
[ 3.239533] hub 2-0:1.0: USB hub found
[ 3.239908] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.239921] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.239962] hub 2-0:1.0: 1 port detected
[ 3.240946] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.240960] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.241702] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.241716] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.242737] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.242750] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.243478] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.243491] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.244618] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.244631] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.245366] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.245379] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.246616] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.246629] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.247355] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.247367] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.248386] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.248399] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.249110] rockchip-gpio ff460000.gpio: got irq for bank gpio0
[ 3.249124] rockchip-gpio ff460000.gpio: handling irq 9
[ 3.251479] rk808 0-0020: GPIO lookup for consumer dvs
[ 3.251497] rk808 0-0020: using device tree for GPIO lookup
[ 3.251519] of_get_named_gpiod_flags: can’t parse ‘dvs-gpios’ property of node ‘/i2c@ff3f0000/pmic@20[0]’
[ 3.251553] of_get_named_gpiod_flags: can’t parse ‘dvs-gpio’ property of node ‘/i2c@ff3f0000/pmic@20[0]’
[ 3.251578] rk808 0-0020: using lookup tables for GPIO lookup
[ 3.251639] rk808 0-0020: No GPIO consumer dvs found
[ 3.251654] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 3.252209] rk808 0-0020: GPIO lookup for consumer dvs
[ 3.252219] rk808 0-0020: using device tree for GPIO lookup
[ 3.252237] of_get_named_gpiod_flags: can’t parse ‘dvs-gpios’ property of node ‘/i2c@ff3f0000/pmic@20[1]’
[ 3.252266] of_get_named_gpiod_flags: can’t parse ‘dvs-gpio’ property of node ‘/i2c@ff3f0000/pmic@20[1]’
[ 3.252288] rk808 0-0020: using lookup tables for GPIO lookup
[ 3.252297] rk808 0-0020: No GPIO consumer dvs found
[ 3.252308] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 3.267506] vcc_dvdd: Bringing 1100000uV into 1200000-1200000uV
[ 3.276117] input: rk805 pwrkey as /devices/platform/ff3f0000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
[ 3.278373] dw-apb-uart ff560000.serial: Failed to create device link (0x180) with 0-0020
[ 3.280550] rtc-pcf8563 2-0051: registered as rtc0
[ 3.281321] rtc-pcf8563 2-0051: hctosys: unable to read the hardware clock
[ 3.282582] pwrseq_simple pwrseq-sdio: GPIO lookup for consumer reset
[ 3.282599] pwrseq_simple pwrseq-sdio: using device tree for GPIO lookup
[ 3.282627] of_get_named_gpiod_flags: parsed ‘reset-gpios’ property of node ‘/pwrseq-sdio[0]’ - status (0)
[ 3.282635] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[ 3.282652] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.283390] gpio gpiochip1: Persistence not supported for GPIO 24
[ 3.284008] usb usb1: Product: Generic Platform OHCI controller
[ 3.284534] usb usb1: Manufacturer: Linux 6.1.56 ohci_hcd
[ 3.285066] usb usb1: SerialNumber: ffe10000.usb
[ 3.285880] hci_uart_h5 serial0-0: GPIO lookup for consumer enable
[ 3.285896] hci_uart_h5 serial0-0: using device tree for GPIO lookup
[ 3.285944] of_get_named_gpiod_flags: parsed ‘enable-gpios’ property of node ‘/serial@ff560000/bluetooth[0]’ - status (0)
[ 3.285985] gpio gpiochip1: Persistence not supported for GPIO 22
[ 3.286009] hci_uart_h5 serial0-0: GPIO lookup for consumer device-wake
[ 3.286019] hci_uart_h5 serial0-0: using device tree for GPIO lookup
[ 3.286059] of_get_named_gpiod_flags: can’t parse ‘device-wake-gpios’ property of node ‘/serial@ff560000/bluetooth[0]’
[ 3.286089] of_get_named_gpiod_flags: can’t parse ‘device-wake-gpio’ property of node ‘/serial@ff560000/bluetooth[0]’
[ 3.286113] hci_uart_h5 serial0-0: using lookup tables for GPIO lookup
[ 3.286124] hci_uart_h5 serial0-0: No GPIO consumer device-wake found
[ 3.286879] hub 1-0:1.0: USB hub found
[ 3.287284] hub 1-0:1.0: 1 port detected
[ 3.287364] dwmmc_rockchip ffc50000.mmc: IDMAC supports 32-bit address mode.
[ 3.288963] dwmmc_rockchip ffc60000.mmc: IDMAC supports 32-bit address mode.
[ 3.290381] dwmmc_rockchip ffc70000.mmc: IDMAC supports 32-bit address mode.
[ 3.291150] dwmmc_rockchip ffc60000.mmc: Using internal DMA controller.
[ 3.291799] dwmmc_rockchip ffc60000.mmc: Version ID is 270a
[ 3.292376] dwmmc_rockchip ffc60000.mmc: DW MMC controller at irq 83,32 bit host data width,256 deep fifo
[ 3.293559] dwmmc_rockchip ffc50000.mmc: Using internal DMA controller.
[ 3.293673] dwmmc_rockchip ffc60000.mmc: GPIO lookup for consumer cd
[ 3.294157] dwmmc_rockchip ffc60000.mmc: using device tree for GPIO lookup
[ 3.294158] dwmmc_rockchip ffc50000.mmc: Version ID is 270a
[ 3.294178] of_get_named_gpiod_flags: can’t parse ‘cd-gpios’ property of node ‘/mmc@ffc60000[0]’
[ 3.294666] of_get_named_gpiod_flags: can’t parse ‘cd-gpio’ property of node ‘/mmc@ffc60000[0]’
[ 3.294690] dwmmc_rockchip ffc60000.mmc: using lookup tables for GPIO lookup
[ 3.294700] dwmmc_rockchip ffc60000.mmc: No GPIO consumer cd found
[ 3.294702] dwmmc_rockchip ffc50000.mmc: DW MMC controller at irq 82,32 bit host data width,256 deep fifo
[ 3.294713] dwmmc_rockchip ffc60000.mmc: GPIO lookup for consumer wp
[ 3.295606] dwmmc_rockchip ffc60000.mmc: using device tree for GPIO lookup
[ 3.295625] of_get_named_gpiod_flags: can’t parse ‘wp-gpios’ property of node ‘/mmc@ffc60000[0]’
[ 3.295653] of_get_named_gpiod_flags: can’t parse ‘wp-gpio’ property of node ‘/mmc@ffc60000[0]’
[ 3.295674] dwmmc_rockchip ffc60000.mmc: using lookup tables for GPIO lookup
[ 3.295685] dwmmc_rockchip ffc60000.mmc: No GPIO consumer wp found
[ 3.296171] dwmmc_rockchip ffc70000.mmc: Using internal DMA controller.
[ 3.296774] dwmmc_rockchip ffc70000.mmc: Version ID is 270a
[ 3.296922] dwmmc_rockchip ffc50000.mmc: GPIO lookup for consumer wp
[ 3.297274] dwmmc_rockchip ffc50000.mmc: using device tree for GPIO lookup
[ 3.297293] of_get_named_gpiod_flags: can’t parse ‘wp-gpios’ property of node ‘/mmc@ffc50000[0]’
[ 3.297323] dwmmc_rockchip ffc70000.mmc: DW MMC controller at irq 84,32 bit host data width,256 deep fifo
[ 3.297324] of_get_named_gpiod_flags: can’t parse ‘wp-gpio’ property of node ‘/mmc@ffc50000[0]’
[ 3.297345] dwmmc_rockchip ffc50000.mmc: using lookup tables for GPIO lookup
[ 3.298172] dwmmc_rockchip ffc50000.mmc: No GPIO consumer wp found
[ 3.298210] mmc_host mmc0: card is non-removable.
[ 3.299760] dwmmc_rockchip ffc70000.mmc: GPIO lookup for consumer wp
[ 3.299776] dwmmc_rockchip ffc70000.mmc: using device tree for GPIO lookup
[ 3.299795] of_get_named_gpiod_flags: can’t parse ‘wp-gpios’ property of node ‘/mmc@ffc70000[0]’
[ 3.299823] of_get_named_gpiod_flags: can’t parse ‘wp-gpio’ property of node ‘/mmc@ffc70000[0]’
[ 3.299846] dwmmc_rockchip ffc70000.mmc: using lookup tables for GPIO lookup
[ 3.299855] dwmmc_rockchip ffc70000.mmc: No GPIO consumer wp found
[ 3.299897] dwmmc_rockchip ffc70000.mmc: allocated mmc-pwrseq
[ 3.300412] mmc_host mmc2: card is non-removable.
[ 3.303310] rk_gmac-dwmac ffc40000.ethernet: IRQ eth_lpi not found
[ 3.304366] rk_gmac-dwmac ffc40000.ethernet: clock input or output? (output).
[ 3.305053] rk_gmac-dwmac ffc40000.ethernet: Can not read property: tx_delay.
[ 3.305688] rk_gmac-dwmac ffc40000.ethernet: set tx_delay to 0x30
[ 3.306232] rk_gmac-dwmac ffc40000.ethernet: Can not read property: rx_delay.
[ 3.306862] rk_gmac-dwmac ffc40000.ethernet: set rx_delay to 0x10
[ 3.307414] rk_gmac-dwmac ffc40000.ethernet: integrated PHY? (no).
[ 3.311702] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.312624] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.313038] rk_gmac-dwmac ffc40000.ethernet: init for RMII
[ 3.314246] rk_gmac-dwmac ffc40000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 3.314893] rk_gmac-dwmac ffc40000.ethernet: DWMAC4/5
[ 3.315109] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.315380] rk_gmac-dwmac ffc40000.ethernet: DMA HW capability register supported
[ 3.316809] rk_gmac-dwmac ffc40000.ethernet: RX Checksum Offload Engine supported
[ 3.317471] rk_gmac-dwmac ffc40000.ethernet: TX Checksum insertion supported
[ 3.318093] rk_gmac-dwmac ffc40000.ethernet: Wake-Up On Lan supported
[ 3.318759] rk_gmac-dwmac ffc40000.ethernet: TSO supported
[ 3.319251] rk_gmac-dwmac ffc40000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 3.319983] rk_gmac-dwmac ffc40000.ethernet: device MAC address 9e:3f:ef:00:0b:8d
[ 3.320650] rk_gmac-dwmac ffc40000.ethernet: Enabled RFS Flow TC (entries=10)
[ 3.321284] rk_gmac-dwmac ffc40000.ethernet: TSO feature enabled
[ 3.321842] rk_gmac-dwmac ffc40000.ethernet: Using 32/32 bits DMA host/device width
[ 3.323183] mdio_bus stmmac-0: GPIO lookup for consumer reset
[ 3.323197] mdio_bus stmmac-0: using device tree for GPIO lookup
[ 3.323217] of_get_named_gpiod_flags: can’t parse ‘reset-gpios’ property of node ‘/ethernet@ffc40000/mdio[0]’
[ 3.323247] of_get_named_gpiod_flags: can’t parse ‘reset-gpio’ property of node ‘/ethernet@ffc40000/mdio[0]’
[ 3.323272] mdio_bus stmmac-0: using lookup tables for GPIO lookup
[ 3.323282] mdio_bus stmmac-0: No GPIO consumer reset found
[ 3.323294] rk_gmac-dwmac ffc40000.ethernet: GPIO lookup for consumer snps,reset
[ 3.323303] rk_gmac-dwmac ffc40000.ethernet: using device tree for GPIO lookup
[ 3.323321] of_get_named_gpiod_flags: can’t parse ‘snps,reset-gpios’ property of node ‘/ethernet@ffc40000[0]’
[ 3.323347] of_get_named_gpiod_flags: can’t parse ‘snps,reset-gpio’ property of node ‘/ethernet@ffc40000[0]’
[ 3.323367] rk_gmac-dwmac ffc40000.ethernet: using lookup tables for GPIO lookup
[ 3.323378] rk_gmac-dwmac ffc40000.ethernet: No GPIO consumer snps,reset found
[ 3.334222] mdio_bus stmmac-0:00: GPIO lookup for consumer reset
[ 3.334250] mdio_bus stmmac-0:00: using device tree for GPIO lookup
[ 3.334309] of_get_named_gpiod_flags: parsed ‘reset-gpios’ property of node ‘/ethernet@ffc40000/mdio/ethernet-phy@0[0]’ - status (0)
[ 3.334364] gpio gpiochip2: Persistence not supported for GPIO 6
[ 3.334788] dwmmc_rockchip ffc70000.mmc: card claims to support voltages below defined range
[ 3.345523] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 3.346434] mmc2: error -110 whilst initialising SDIO card
[ 3.361671] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 3.381695] dwmmc_rockchip ffc70000.mmc: card claims to support voltages below defined range
[ 3.388006] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[ 3.388981] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 200000000Hz, actual 198000000HZ div = 0)
[ 3.396742] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 3.397657] mmc2: error -110 whilst initialising SDIO card
[ 3.402668] printk: console [netcon0] enabled
[ 3.403076] netconsole: network logging started
[ 3.404194] ALSA device list:
[ 3.404474] #0: Loopback 1
[ 3.405014] dw-apb-uart ff570000.serial: forbid DMA for kernel console
[ 3.408614] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 200000000Hz, actual 198000000HZ div = 0)
[ 3.413251] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 3.432399] dwmmc_rockchip ffc50000.mmc: Successfully tuned phase to 64
[ 3.433067] mmc0: new HS200 MMC card at address 0001
[ 3.434598] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 3.435142] dwmmc_rockchip ffc70000.mmc: card claims to support voltages below defined range
[ 3.439249] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[ 3.442130] mmcblk0boot0: mmc0:0001 8GTF4R 4.00 MiB
[ 3.444482] mmcblk0boot1: mmc0:0001 8GTF4R 4.00 MiB
[ 3.446546] mmcblk0rpmb: mmc0:0001 8GTF4R 512 KiB, chardev (244:0)
[ 3.456516] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 3.457444] mmc2: error -110 whilst initialising SDIO card
[ 3.473094] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[ 3.499025] dwmmc_rockchip ffc70000.mmc: card claims to support voltages below defined range
[ 3.537540] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 3.538488] mmc2: error -110 whilst initialising SDIO card
[ 3.623791] dwmmc_rockchip ffc60000.mmc: Successfully tuned phase to 137
[ 3.624415] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 3.626054] mmcblk1: mmc1:aaaa SB32G 29.7 GiB
[ 3.632553] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 3.633231] GPT:607743 != 62333951
[ 3.633541] GPT:Alternate GPT header not at the end of the disk.
[ 3.634072] GPT:607743 != 62333951
[ 3.634381] GPT: Use GNU Parted to correct GPT errors.
[ 3.634884] mmcblk1: p1 p2 p3 p4
[ 3.920181] Freeing unused kernel image (initmem) memory: 1024K
[ 3.920999] Run /init as init process
[ 3.921336] with arguments:
[ 3.921343] /init
[ 3.921350] with environment:
[ 3.921356] HOME=/
[ 3.921362] TERM=linux
[ 3.966687] systemd[1]: System time before build time, advancing clock.
[ 3.987109] systemd[1]: systemd 252 running in system mode (-PAM -AUDIT -SELINUX -APPARMOR -IMA -SMACK -SECCOMP -GCRYPT -GNUTLS +OPENSSL -ACL +BLKID +CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 +XZ +ZLIB -ZSTD -BPF_FRAMEWORK -XKBCOMMON -UTMP -SYSVINIT default-hierarchy=unified)
[ 3.989985] systemd[1]: Detected architecture arm.
[ 4.002080] systemd[1]: Hostname set to
`
darkxst
commented
1 year ago [ 0.015710] smp: Bringing up secondary CPUs … [ 0.017772] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.018573] CPU2: failed to boot: -95 [ 0.020303] CPU3: failed to boot: -95 [ 0.020708] smp: Brought up 1 node, 2 CPUs [ 0.021096] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.021672] CPU: All CPU(s) started in SVC mode.
This should not cause a problem, CPU2 and CPU3 dont exist on rv1109 but it successfully brings up the 2 cores.
I dont have 2gb model to test myself, however my understanding is that effectively the same as rv1126 with the only difference being the number of cores.
Both images use the same kernel, so its strange that one is bootlooping and the other isnt.
riddik14
commented
1 year ago unfortunately after the reboot, after having flashed boot.img , it is not possible to read the logs but from link activity on the switch I know after 25 seconds the reboot of the network card. Is there a way, like from a physical serial port, to read what happens at boot?
darkxst
commented
1 year ago after 25 seconds the reboot of the network card. thats getting a good chunk of the way into boot, maybe something in userspace crashing the kernel.
To see the boot logs you need to connect to the physical debug console.
You need a USB-to-UART adapter for this.
connect the pins this way:
GND -> GND
TX -> RX
RX -> TX
Connect using baudrate 1500000
If you can't get into the USB console, this is the only way to see more. As it shows every message from power on.
riddik14
commented
1 year ago [ 4.823828] systemd[1]: Mounted Kernel Configuration File System.
[ OK ] Mounted Kernel Configuration File System.
[ 5.042711] systemd[1]: Starting D-Bus System Message Bus...
Starting D-Bus System Message Bus...
[ 5.092713] systemd[1]: Finished Create Static Device Nodes in /dev.
[ OK ] Finished Create Static Device Nodes in /dev.
[ 5.105994] systemd[1]: Reached target Preparation for Local File Systems.
[ OK ] Reached target Preparation for Local File Systems.
[ 5.124039] audit: type=1334 audit(1680605725.830:2): prog-id=6 op=LOAD
[ 5.124672] audit: type=1334 audit(1680605725.830:3): prog-id=7 op=LOAD
[ 5.149462] systemd[1]: Starting Rule-based Manager for Device Events and Files...
Starting Rule-based Manage…for Device Events and Files...
[ 5.312010] systemd[1]: Started D-Bus System Message Bus.
[ OK ] Started D-Bus System Message Bus.
[ 5.694478] systemd[1]: Finished Coldplug All udev Devices.
[ OK ] Finished Coldplug All udev Devices systemd[1]: Started Rule-based Manager for Device Events and Files.
[ OK ] Started Rule-ba[ 5.773592] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Found device /dev/zram2.
[ OK ] Found device /dev/ttyS2.
[ OK ] Found device /dev/ttyGS0.
[ OK ] Found device /dev/disk/by-label/hassos-overlay.
[ OK ] Found device /dev/disk/by-label/hassos-boot.
[ OK ] Found device /dev/disk/by-label/hassos-data.
Starting File System Check…v/disk/by-label/hassos-boot...
Starting File System Check…v/disk/by-label/hassos-data...
Starting File System Check…isk/by-label/hassos-overlay...
[ OK ] Finished File System Check…dev/disk/by-label/hassos-boot.
Mounting HassOS boot partition...
[ OK ] Finished File System Check…dev/disk/by-label/hassos-data.
Starting HAOS data disk detach...
[ OK ] Finished File System Check…/disk/by-label/hassos-overlay.
[ OK ] Mounted HassOS boot partition.
Starting Home Assistant OS Agent...
[ OK ] Started Home Assistant OS Agent.
Mounting HassOS overlay partition...
[ 7.587990] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Quota mode: disabled.
E/TC:0 assertion 'cpuson_flags[cpu_id] == 0' failed at core/arch/arm/plat-rockchip/rv1126/pmu.c:597
riddik14
commented
1 year ago boot from sd and mmc return this Panic
riddik14
commented
1 year ago first line to boot
U-Boot TPL 2023.07.02 (Oct 25 2023 - 03:51:48) Trying to boot from BOOTROM Returning to boot ROM...
U-Boot SPL 2023.07.02 (Oct 25 2023 - 03:51:48 +0000) Trying to boot from MMC1 I/TC: I/TC: cpu feature:0x13 I/TC: RV1109 SoC I/TC: cpu_st=0xe0 I/TC: Next entry point address: 0x00600000 I/TC: OP-TEE version: 3.13.0-715-g59f324679 #hisping.lin (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05)) #3 Fri May 26 15:53:34 CST 2023 arm I/TC: Primary CPU initializing E/TC:0 0 hal_algo_version_init:289 CRYPTO_CRYPTO_VERSION_NEW no support. Skip all algo mode check. I/TC: Primary CPU switching to normal world boot
U-Boot 2023.07.02 (Oct 25 2023 - 03:51:48 +0000)
Model: Sonoff iHost DRAM: 2 GiB PMIC: RK8090 (on=0x40, off=0x00) Core: 99 devices, 20 uclasses, devicetree: separate MMC: mmc@ffc50000: 0, mmc@ffc60000: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@ff570000 Out: serial@ff570000 Err: serial@ff570000 Model: Sonoff iHost Net: No ethernet found. ** Booting bootflow 'mmc@ffc50000.bootdev.part_1' with script switch to partitions #0, OK mmc0(part 0) is current device loading env...
MMC read: dev # 0, block # 1214464, count 64 ... 64 blocks read: OK 0 bytes read in 1 ms (0 Bytes/s)
darkxst
commented
1 year ago So this is happening mounting the overlay fs, the installer doesnt use these so guess that why its not affected.
[ 7.587990] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Quota mode: disabled. E/TC:0 assertion 'cpuson_flags[cpu_id] == 0' failed at core/arch/arm/plat-rockchip/rv1126/pmu.c:597
E/TC:0 Panic at core/kernel/assert.c:28 <_assert_break>
This is executed inside OP-TEE which is a closed source binary blob. However at a guess its probably trying to power up one of the missing cores.
[ 7.671659] dwmmc_rockchip ffc50000.mmc: Unexpected interrupt latency
Probably related to above.
Guess will need a specific rv1109 dtb to override the cpu nodes
darkxst
commented
1 year ago Can you do a quick test with this image. Boot it from SD card. https://drive.google.com/file/d/1-eNTTKZSihFT7haGAYNnR6C9PJWLrAwj/view?usp=sharing
Hit any key in early boot prompt to enter the u-boot shell then run this command:
printenv soc cpucode#
I am hoping atleast one of those will show 1109. or rv1109. If so I will be able to use that to load correct device tree on boot (this is not included in this image though).
darkxst
commented
1 year ago I still need the above test done, but here is another test image. This one tests the required changes for rv1109. Let me know if this one boots all the way.
https://drive.google.com/file/d/1-O_PTbWqUeKwaZiL-GPI3omQ1PgqigHz/view?usp=drive_link
EDIT: fixed this link
riddik14
commented
1 year ago U-Boot TPL 2023.07.02 (Nov 07 2023 - 04:25:48) Trying to boot from BOOTROM Returning to boot ROM...
U-Boot SPL 2023.07.02 (Nov 07 2023 - 04:25:48 +0000) Trying to boot from MMC2 I/TC: I/TC: cpu feature:0x13 I/TC: RV1109 SoC I/TC: cpu_st=0xe0 I/TC: Next entry point address: 0x00600000 I/TC: OP-TEE version: 3.13.0-715-g59f324679 #hisping.lin (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05)) #3 Fri May 26 15:53:34 CST 2023 arm I/TC: Primary CPU initializing E/TC:0 0 hal_algo_version_init:289 CRYPTO_CRYPTO_VERSION_NE support. Skip all algo mode check. I/TC: Primary CPU switching to normal world boot
U-Boot 2023.07.02 (Nov 07 2023 - 04:25:48 +0000)
Model: Sonoff iHost DRAM: 2 GiB PMIC: RK8090 (on=0x40, off=0x00) Core: 99 devices, 20 uclasses, devicetree: separate MMC: mmc@ffc50000: 0, mmc@ffc60000: 1 Loading Environment from MMC... Card did not respond to voltage select! : -110 *** Warning - No block device, using default environment
Loading Environment from nowhere... OK In: serial@ff570000 Out: serial@ff570000 Err: serial@ff570000 Model: Sonoff iHost cpuid: 4b413234363200000000000000061130 cpu code: 1109 Net: No ethernet found. Hit any key to stop autoboot: 0 HAOS> printenv soc cpucode# soc=rv1126 cpucode#=1109 HAOS>
riddik14
commented
1 year ago lan is rtl8201f but not start? wifi+bt is fn-Link 6223a-srd zigbee is EFR32 MG21
darkxst
commented
1 year ago cpucode#=1109
Perfect
lan is rtl8201f but not start?
Lan wont work in u-boot, but should come up later
wifi+bt is fn-Link 6223a-srd
where did you get that from? wifi should be rtl8723ds?
Does that second image boot through the previous issue? If it does work, I will merge these changes into the main image.
Note these images are built from my dev enviroment which means they are using linux 6.6, but that hasnt been thoroughly tested yet, but these builds have a bit more debugging enabled.
riddik14
commented
12 months ago For lan I have read code on chip. From install image, ping not work on lan
darkxst
commented
12 months ago For lan I have read code on chip. From install image, ping not work on lan
The lan chip should work on the installer, however its not been tested as the installer uses image from sdcard.
Did you test this second image? its applies an overlay with config for the RV1109 so hopefully should boot into Home Assistant proper now? *USB Debug console is broken currently on this image, so you will need to use your UART adapter. Dont worry to much if peripherals dont work on this image (they are dev images with upgraded kernel), just see if you can get past the mounting overlay that panic'ed previously.
https://drive.google.com/file/d/1-O_PTbWqUeKwaZiL-GPI3omQ1PgqigHz/view?usp=drive_link
EDIT: fixed this link
darkxst
commented
12 months ago fn-Link 6223a-srd
ok that is actually the RTL8723DS chip underneath the shell.
riddik14
commented
12 months ago [ 10.659207] systemd[1]: Mounting Kernel Configuration File System...
Mounting Kernel Configuration File System...
[ 10.671614] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 10.683175] systemd[1]: Mounted Kernel Configuration File System.
[ OK ] Mounted Kernel Configuration File System.
[ 10.903260] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
Starting D-Bus System Message Bus...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Preparation for Local File Systems.
[ 11.071996] audit: type=1334 audit(1680605725.960:2): prog-id=6 op=LOAD
[ 11.072638] audit: type=1334 audit(1680605725.960:3): prog-id=7 op=LOAD
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Started D-Bus System Message Bus.
[ 11.308194] dbus-broker-lau[123]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Found device /dev/zram2.
[ OK ] Found device /dev/ttyS2.
[ OK ] Found device /dev/disk/by-label/hassos-boot.
Starting File System Check…v/disk/by-label/hassos-boot...
[ OK ] Finished File System Check…dev/disk/by-label/hassos-boot.
[ OK ] Found device /dev/disk/by-label/hassos-overlay.
[ OK ] Found device /dev/ttyGS0.
Mounting HassOS boot partition...
Starting File System Check…isk/by-label/hassos-overlay...
[ OK ] Mounted HassOS boot partition.
Starting Home Assistant OS Agent...
[ OK ] Finished File System Check…/disk/by-label/hassos-overlay.
[ OK ] Started Home Assistant OS Agent.
Mounting HassOS overlay partition...
[ 13.368796] EXT4-fs (mmcblk1p7): mounted filesystem 2b86d324-58ec-4484-9697-bb0026999027 r/w with ordered data mode. Quota mo[ OK ] Mounted HassOS overlay partition.
Mounting Dropbear persistent keys...
Mounting Kernel persistent modprobe.d...
Mounting Kernel persistent modules-load.d...
Mounting Udev persistent rules.d...
E/TC:1 assertion 'cpuson_flags[cpu_id] == 0' failed at core/arch/arm/plat-rockchip/rv1126/pmu.c:597
after reboot ihost
darkxst
commented
12 months ago ok that still no enough, try this one, surely it will work now!
edit: try this image, merged into stable branch, this will become 11.1rc2 release: https://drive.google.com/file/d/1fHI2I909fHIL7PZtglZcqrmhjunTFkCX/view?usp=sharing
you should see u-boot logs like this (but showing 1109 for yours)
Detected SoC RV1126
Loading standard device tree rv1126-sonoff-ihost.dtb=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.11.12 02:50:06 =~=~=~=~=~=~=~=~=~=~=~=
U-Boot TPL 2023.10 (Nov 12 2023 - 01:52:55) Trying to boot from BOOTROM Returning to boot ROM...
U-Boot SPL 2023.10 (Nov 12 2023 - 01:52:55 +0000) Trying to boot from MMC2 I/TC: I/TC: cpu feature:0x13 I/TC: RV1109 SoC I/TC: cpu_st=0xe0 I/TC: Next entry point address: 0x00600000 I/TC: OP-TEE ve1 20170404 (Linaro GCC 6.3-2017.05)) #3 Fri May 26 15:53:34 CST 0 hal_algo_version_init:289 CRYPTO_CRYPTO_VERSION_NEW no supporgo mode check. I/TC: Primary CPU switching to normal world boot
U-Boot 2023.10 (Nov 12 2023 - 01:52:55 +0000)
Model: Sonoff iHost DRAM: 2 GiB PMIC: RK8090 (on=0x40, off=0x00) Core: 99 devices, 20 uclasses, devicetree: separate MMC: mmc@ffc50000: 0, mmc@ffc60000: 1 Loading Environment from MMC... Card did not respond to voltage select! : -110 *** Warning - No block device, using default environment
Loading Environment from nowhere... OK In: serial@ff570000 Out: serial@ff570000 Err: serial@ff570000 Model: Sonoff iHost cpuid: 4b413234363200000000000000061130 cpu code: 1109 Net: No ethernet found. ** Booting bootflow 'mmc@ffc60000.bootdev.part_1' with script switch to partitions #0, OK mmc1 is current device loading env...
MMC read: dev # 1, block # 1214464, count 64 ... 64 blocks read: OK 0 bytes read in 0 ms 59 bytes read in 2 ms (28.3 KiB/s) Detected SoC RV1109 Loading standard device tree rv1109-sonoff-ihost.dtb Failed to load 'rv1109-sonoff-ihost.dtb' libfdt fdt_check_header(): FDT_ERR_BADMAGIC No FDT memory address configured. Please configure the FDT address via "fdt addr
" command. Aborting! Trying to boot slot A, 1 attempts remaining. Loading kernel ... 7956144 bytes read in 422 ms (18 MiB/s) storing env...MMC write: dev # 1, block # 1214464, count 64 ... 64 blocks written: OK Starting kernel Kernel image @ 0x2008000 [ 0x000000 - 0x7966b0 ] ERROR: Did not find a cmdline Flatteneree Boot failed, resetting... resetting ...
U-Boot SPL 2023.10 (Noö 12 2023 - 01:52:55 +0000) Trying to boÿt froý MMC2 É/TC: I/TÃ: cpõ feature:0ø13 I/TC: RV1109 SoC É/TC: cpu_st=0xç0 I/TC: Nexô entry poùnt aädress: 0x00600°00 I/TCº OP-üEE versiïn: 3.13.0½715-g59f324679 #hióping.lin (gcc versiïn 6.3.1 201C 6.3-2017.059) #3 Fri Íay 26 15:53:34 CST 2023 arý I/TC: Préma E/TC:0 0 hal_algoÿversÚÛ-[7gf6Ë£{ûË£{û³+K{sûs+»æ{6«{£s6m[ccc;{Ö{#+6C+[sÖ I/TC: Primáry CPU switãhing to normal wÿrld âoot
U-Bïot 2023.10 (Nov 12 2023 - 01¾52:55 +0000)
Model: Sonÿff iHÿst DRAM: 2 Giâ ðMIC: RK8090 (on=0x40, ÿff=0x°0) Corå: 99 device&Vc ÙnF+vicetòee: såparateÃaÓÓhgþmmc@fælͦÆÖkc@ffc6°000: ÌÃáLoaäing Eþviroîment ærom MïC... Card did not respond to voltage select! : -110 *** Warning - No block device, using default environment
Loading Environment from nowhere... OK In: serial@ff570000 Out: serial@ff570000 Err: serial@ff570000 Model: Sonoff iHost cpuid: 4b413234363200000000000000061130 cpu code: 1109 Net: No ethernet found. ** Booting bootflow 'mmc@ffc60000.bootdev.part_1' with script switch to partitions #0, OK mmc1 is current device loading env...
MMC read: dev # 1, block # 1214464, count 64 ... 64 blocks read: OK 0 bytes read in 0 ms 59 bytes read in 2 ms (28.3 KiB/s) Detected SoC RV1109 Loading standard device tree rv1109-sonoff-ihost.dtb Failed to load 'rv1109-sonoff-ihost.dtb' libfdt fdt_check_header(): FDT_ERR_BADMAGIC No FDT memory address configured. Please FDT address via "fdt addr
" command. Aborting! Trying to boot slot A, 0 attempts remaining. Loading kernel ... 7956144 bytes read in 422 ms (18 MiB/s) storing env...MMC write: dev # 1, block # 1214464, count 64 ... 64 blocks written: OK Starting kernel Kernel image @ 0x2008000 [ 0x000000 - 0x7966b0 ] ERROR: Did not find a cmdline Flattene U-Boot TPL 2023.10 (Nov 12 2023 - 01:52:55) Trying to boot from BOOTROM Returning to boot ROM...
U-Boot SPL 2023.10 (Nov 12 2023 - 01:52:55 +0000) Trying to boot from MMC2 I/TC: I/TC: cpu feature:0x13 I/TC: RV1109 SoC I/TC: cpu_st=0xe0 I/TC: Next entry point address: 0x00600000 I/TC: OP-TEE ve3.1 20170404 (Linaro GCC 6.3-2017.05)) #3 Fri May 26 15:53:34 CS_VERSION_NEW no support. Skip all algo mode check. I/TC: Primary CPU switching to normal world boot
U-Boot 2023.10 (Nov 12 2023 - 01:52:55 +0000)
Model: Sonoff iHost DRAM: 2 GiB PMIC: RK8090 (on=0x40, off=0x00) Core: 99 devices, 20 uclasses, devicetree: separate MMC: mmc@ffc50000: 0, mmc@ffc60000: 1 Loading Environment from MMC... Card did not respond to voltage select! : -110 *** Warning - No block device, using default environment
Loading Environment from nowhere... OK In: serial@ff570000 Out: serial@ff570000 Err: serial@ff570000 Model: Sonoff iHost cpuid: 4b413234363200000000000000061130 cpu code: 1109 Net: No ethernet found. ** Booting bootflow 'mmc@ffc60000.bootdev.part_1' with script switch to partitions #0, OK mmc1 is current device loading env...
MMC read: dev # 1, block # 1214464, count 64 ... 64 blocks read: OK 0 bytes read in 1 ms (0 Bytes/s) 59 bytes read in 1 ms (57.6 KiB/s) Detected SoC RV1109 Loading standard device tree rv1109-sonoff-ihost.dtb Failed to load 'rv1109-sonoff-ihost.dtb' libfdt fdt_check_header(): FDT_ERR_BADMAGIC No FDT memory address configured. Please configure the FDT address via "fdt addr
" command. Aborting! Trying to boot slot B, 2 attempts remaining. Loading kernel ... Can't set block device No valid slot found, resetting tries to 3 storing env...MMC write: dev # 1, block # 1214464, count 64 ... 64 blocks written: OK resetting ...
riddik14
commented
12 months ago not start
darkxst
commented
12 months ago let me check, why....
Detected SoC RV1109
Loading standard device tree rv1109-sonoff-ihost.dtb
Failed to load 'rv1109-sonoff-ihost.dtb'That file was missing from the images, oops...
darkxst
commented
12 months ago @riddik14 Try again, this should fix the above error... https://drive.google.com/file/d/1n6nhSEpoeAckDO9l9vJyi2N3lgZI39G_/view?usp=sharing
riddik14
commented
12 months ago U-Boot TPL 2023.10 (Nov 12 2023 - 01:52:55)
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2023.10 (Nov 12 2023 - 01:52:55 +0000)
Trying to boot from MMC2
I/TC:
I/TC: cpu feature:0x13
I/TC: RV1109 SoC
I/TC: cpu_st=0xe0
I/TC: Next entry point address: 0x00600000
I/TC: OP-TEE ve.1 20170404 (Linaro GCC 6.3-2017.05)) #3 Fri May 26 15:53:34 CSTersion_init:289 CRYPTO_CRYPTO_VERSION_NEW no support. Skip all aI/TC: Primary CPU switching to normal world boot
U-Boot 2023.10 (Nov 12 2023 - 01:52:55 +0000)
Model: Sonoff iHost
DRAM: 2 GiB
PMIC: RK8090 (on=0x40, off=0x00)
Core: 99 devices, 20 uclasses, devicetree: separate
MMC: mmc@ffc50000: 0, mmc@ffc60000: 1
Loading Environment from MMC... Card did not respond to voltage select! : -110
*** Warning - No block device, using default environment
Loading Environment from nowhere... OK
In: serial@ff570000
Out: serial@ff570000
Err: serial@ff570000
Model: Sonoff iHost
cpuid: 4b413234363200000000000000061130
cpu code: 1109
Net: No ethernet found.
** Booting bootflow 'mmc@ffc60000.bootdev.part_1' with script
switch to partitions #0, OK
mmc1 is current device
loading env...
MMC read: dev # 1, block # 1214464, count 64 ... 64 blocks read: OK
## Error: bad CRC, import failed
0 bytes read in 1 ms (0 Bytes/s)
59 bytes read in 1 ms (57.6 KiB/s)
Detected SoC RV1109
Loading standard device tree rv1109-sonoff-ihost.dtb
36122 bytes read in 5 ms (6.9 MiB/s)
Working FDT set to 8300000
Trying to boot slot A, 2 attempts remaining. Loading kernel ...
7956144 bytes read in 433 ms (17.5 MiB/s)
storing env...
MMC write: dev # 1, block # 1214464, count 64 ... 64 blocks written: OK
Starting kernel
Kernel image @ 0x2008000 [ 0x000000 - 0x7966b0 ]
## Flattened Device Tree blob at 08300000
Booting using the fdt blob at 0x8300000
Working FDT set to 8300000
Loading Device Tree to 0ff8d000, end 0fffefff ... OK
Working FDT set to ff8d000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Linux version 6.1.62 (builder@f3d410a86cde) (arm-buildroot-linux-gnueabihf-gcc.br_real (Buildroot 2022.02-5845-g1dcee53f5d) 11.4.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Sun Nov 12 01:023
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Sonoff iHost 2G
[ 0.000000] earlycon: uart8250 at MMIO32 0xff570000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 32 MiB at 0x7e000000
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] HighMem [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000083fffff]
[ 0.000000] node 0: [mem 0x000000000a400000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 12 pages/cpu s20180 r8192 d20780 u49152
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 513792
[ 0.000000] Kernel command line: zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id= fsck.repair=yes systemd.condition-first-boot=true root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rootwait rauc.slot=A earlycon=uart8250,mmio32,0xff570000 console=ttyS2,1500000n8
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1997036K/2064384K available (10240K kernel code, 744K rwdata, 2508K rodata, 1024K init, 308K bss, 34580K 768K cma-reserved, 1015808K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs fro 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.00sks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scduler-enlistment delay is 30 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, pre[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counte: mask: 0xffffffffffffff max_cyc88fe9dc0, max_idle_ns: 440795202s
[ 0.000002] sched_clock: 5 41ns, wraps every 4398046511097ns
[ 0.000753] Switching to ay loop, resolution 41ns
[ 0.001651] Failed to get pclk for 'rk_timer'
[ 0.002707] Console: colour dummy device 80x30
[ 0.003180] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.004141] CPU: Testing write buffer coherency: ok
[ 0.004645] pid_max: default: 32768 minimum: 301
[ 0.005175] LSM: Security Framework initializing
[ 0.005736] AppArmor: AppArmor initialized
[ 0.006275] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.006970] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.008971] /cpus/cpu@f00 missing clock-frequency property
[ 0.009566] /cpus/cpu@f01 missing clock-frequency property
[ 0.010093] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.011714] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.012392] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.013134] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.013808] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.014524] Setting up static identity map for 0x100000 - 0x100060
[ 0.015272] rcu: Hierarchical SRCU implementation.
[ 0.015722] rcu: Max phase no-delay instances is 1000.
[ 0.016785] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
[ 0.018831] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.018985] smp: Brought up 1 node, 2 CPUs
[ 0.019969] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.020551] CPU: All CPU(s) started in SVC mode.
[ 0.021780] devtmpfs: initialized
[ 0.030688] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.031686] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.032657] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.034809] pinctrl core: initialized pinctrl subsystem
[ 0.036957] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.039032] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.040396] audit: initializing netlink subsys (disabled)
[ 0.041194] audit: type=2000 audit(0.039:1): state=initialized audit_enabled=0 res=1
[ 0.042431] thermal_sys: Registered thermal governor 'step_wise'
[ 0.042443] thermal_sys: Registered thermal governor 'user_space'
[ 0.043108] cpuidle: using governor menu
[ 0.044245] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.044995] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.049162] rockchip-pm-domain ff3e0000.power-management:power-controller: power-domain: failed to get clk at index 0: -517
[ 0.050232] rockchip-pm-domain ff3e0000.power-management:power-controller: failed to handle node power-domain: -517
[ 0.080574] cryptd: max_cpu_qlen set to 1000
[ 0.082575] iommu: Default domain type: Translated
[ 0.083043] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.084009] SCSI subsystem initialized
[ 0.084588] usbcore: registered new interface driver usbfs
[ 0.085158] usbcore: registered new interface driver hub
[ 0.0[ 0.086292] mc: Linux media interface: v0.10
[ 0.086766] videodev: Linux video capture interface: v2.00
[ 0.087356] pps_core: LinuxPPS API ver. 1 registered
[ 0.087820] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.088682] PTP clock support registered
[ 0.089641] Advanced Linux Sound Architecture Driver Initialized.
[ 0.090923] Bluetooth: Core ver 2.22
[ 0.091310] NET: Registered PF_BLUETOOTH protocol family
[ 0.091806] Bluetooth: HCI device and connection manager initialized
[ 0.092404] Bluetooth: HCI socket layer initialized
[ 0.092864] Bluetooth: L2CAP socket layer initialized
[ 0.093351] Bluetooth: SCO socket layer initialized
[ 0.094636] clocksource: Switched to clocksource arch_sys_counter
[ 0.096067] AppArmor: AppArmor Filesystem Enabled
[ 0.109373] NET: Registered PF_INET protocol family
[ 0.110127] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.113576] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.114448] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.115217] TCP established hash table entries: 8192 (order: 3, 3276h table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.116937] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.117653] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.118365] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.119253] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.120476] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.122808] Initialise system trusted keyrings
[ 0.123523] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.132809] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.249973] Key type asymmetric registered
[ 0.250373] Asymmetric key parser 'x509' registered
[ 0.251023] bounce: pool size: 64 pages
[ 0.251555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.252509] io scheduler mq-deadline registered
[ 0.252942] io scheduler kyber registered
[ 0.274441] dma-pl330 ff4e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.275218] dma-pl330 ff4e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 0.277144] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 0.281046] ff560000.serial: ttyS0 at MMIO 0xff560000 (irq = 33, base_baud = 1500000) is a 16550A
[ 0.282129] serial serial0: tty port ttyS0 registered
[ 0.283645] ff570000.serial: ttyS2 at MMIO 0xff570000 (irq = 34, base_baud = 1500000) is a 16550A
[ 0.284689] printk: console [ttyS2] enabled
[ 0.284689] printk: console [ttyS2] enabled
[ 0.285459] printk: bootconsole [uart8250] disabled
[ 0.285459] printk: bootconsole [uart8250] disabled
[ 0.287484] ff580000.serial: ttyS3 at MMIO 0xff580000 (irq = 35, base_baud = 1500000) is a 16550A
[ 0.289397] ff590000.serial: ttyS4 at MMIO 0xff590000 (irq = 36, base_baud = 1500000) is a 16550A
[ 0.300406] loop: module loaded
[ 0.301380] zram: Added device: zram0
[ 0.302346] zram: Added device: zram1
[ 0.303286] zram: Added device: zram2
[ 0.305148] tun: Universal TUN/TAP device driver, 1.6
[ 0.308420] usbcore: registered new interface driver usb-storage
[ 0.309065] usbcore: registered new interface driver usbserial_generic
[ 0.309675] usbserial: USB Serial support registered for generic
[ 0.310377] UDC core: g_serial: couldn't find an available UDC
[ 0.311091] i2c_dev: i2c /dev entries driver
[ 0.312734] i2c 0-0020: Fixed dependency cycle(s) with /i2c@ff3f0000/pmic@20/regulators/DCDC_REG4
[ 0.313551] i2c 0-0020: Fixed dependency cycle(s) with /i2c@ff3f0000/pmic@20/regulators/DCDC_REG5
[ 0.316266] Driver for 1-wire Dallas network protocol.
[ 0.317897] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 0.318952] Bluetooth: HCI UART driver ver 2.3
[ 0.319360] Bluetooth: HCI UART protocol H4 registered
[ 0.319880] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 0.320785] Synopsys Designware Multimedia Card Interface Driver
[ 0.321879] hid: raw HID events driver (C) Jiri Kosina
[ 0.323140] usbcore: registered new interface driver usbhid
[ 0.323640] usbhid: USB HID core driver
[ 0.330213] IPVS: Registered protocols ()
[ 0.330635] IPVS: Connection hash table configured (size=4096, memory=16Kbytes)
[ 0.331536] IPVS: ipvs loaded.
[ 0.331824] IPVS: [rr] sr registered.
[ 0.333039] NET: Registered PF_INET6 protocol family
[ 0.335123] Segment Routing with IPv6
[ 0.335534] In-situ OAM (IOAM) with IPv6
[ 0.336094] NET: Registered PF_PACKET protocol family
[ 0.336561] NET: Registered PF_KEY protocol family
[ 0.337058] Bridge firewalling registered
[ 0.337472] Key type dns_resolver registered
[ 0.338056] Registering SWP/SWPB emulation handler
[ 0.340860] Loading compiled-in X.509 certificates
[ 0.341980] zswap: loaded using pool lz4/zsmalloc
[ 0.345016] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.380215] rockchip-gpio ff460000.gpio: probed /pinctrl/gpio@ff460000
[ 0.381394] rockchip-gpio ff620000.gpio: probed /pinctrl/gpio@ff620000
[ 0.382002] dw-apb-uart ff560000.serial: Failed to create device link (0x180) with ff620000.gpio
[ 0.383257] rockchip-gpio ff630000.gpio: probed /pinctrl/gpio@ff630000
[ 0.384312] rockchip-gpio ff640000.gpio: probed /pinctrl/gpio@ff640000
[ 0.385381] rockchip-gpio ff650000.gpio: probed /pinctrl/gpio@ff650000
[ 0.387449] phy phy-ff4c0000.usb2phy.0: Failed to get VBUS supply regulator
[ 0.399330] g_serial gadget.0: Gadget Serial v2.4
[ 0.399776] g_serial gadget.0: g_serial ready
[ 0.404155] rk808 0-0020: chip id: 0x8090
[ 0.406706] ehci-platform ffe00000.usb: EHCI Host Controller
[ 0.406727] ohci-platform ffe10000.usb: Generic Platform OHCI controller
[ 0.407242] ehci-platform ffe00000.usb: new USB bus registered, assigned bus number 1
[ 0.407844] ohci-platform ffe10000.usb: new USB bus registered, assigned bus number 2
[ 0.409612] ohci-platform ffe10000.usb: irq 52, io mem 0xffe10000
[ 0.409702] ehci-platform ffe00000.usb: irq 50, io mem 0xffe00000
[ 0.421339] ehci-platform ffe00000.usb: USB 2.0 started, EHCI 1.00
[ 0.422134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 0.422877] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.423520] usb usb1: Product: EHCI Host Controller
[ 0.423958] usb usb1: Manufacturer: Linux 6.1.62 ehci_hcd
[ 0.424438] usb usb1: SerialNumber: ffe00000.u[ 0.425898] hub 1-0:1.0: USB hub found
[ 0.426321] hub 1-0:1.0: 1 port detected
[ 0.436758] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 0.437345] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 0.452835] vcc_dvdd: Bringing 1100000uV into 1200000-1200000uV
[ 0.461647] input: rk805 pwrkey as /devices/platform/ff3f0000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
[ 0.468481] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable.
[ 0.468908] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[ 0.469395] rtc-pcf8563 2-0051: registered as rtc0
[ 0.469870] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.470623] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable.
[ 0.470924] usb usb2: Product: Generic Platform OHCI controller
[ 0.471602] rtc-pcf8563 2-0051: hctosys: unable to read the hardware clock
[ 0.472734] usb usb2: Manufacturer: Linux 6.1.62 ohci_hcd
[ 0.473239] usb usb2: SerialNumber: ffe10000.usb
[ 0.475655] hub 2-0:1.0: USB hub found
[ 0.476641] hub 2-0:1.0: 1 port detected
[ 0.477139] dwmmc_rockchip ffc60000.mmc: IDMAC supports 32-bit address mode.
[ 0.478232] dwmmc_rockchip ffc60000.mmc: Using internal DMA controller.
[ 0.478850] dwmmc_rockchip ffc60000.mmc: Version ID is 270a
[ 0.479329] dwmmc_rockchip ffc70000.mmc: IDMAC supports 32-bit address mode.
[ 0.479442] dwmmc_rockchip ffc60000.mmc: DW MMC controller at irq 79,32 bit host data width,256 deep fifo
[ 0.480526] dwmmc_rockchip ffc50000.mmc: IDMAC supports 32-bit address mode.
[ 0.481565] dwmmc_rockchip ffc70000.mmc: Using internal DMA controller.
[ 0.482177] dwmmc_rockchip ffc70000.mmc: Version ID is 270a
[ 0.482370] dwmmc_rockchip ffc50000.mmc: Using internal DMA controller.
[ 0.482732] dwmmc_rockchip ffc70000.mmc: DW MMC controller at irq 80,32 bit host data width,256 deep fifo
[ 0.483413] dwmmc_rockchip ffc50000.mmc: Version ID is 270a
[ 0.484725] dwmmc_rockchip ffc50000.mmc: DW MMC controller at irq 81,32 bit host data width,256 deep fifo
[ 0.486312] dwmmc_rockchip ffc70000.mmc: allocated mmc-pwrseq
[ 0.486837] mmc_host mmc2: card is non-removable.
[ 0.487503] mmc_host mmc0: card is non-removable.
[ 0.491808] rk_gmac-dwmac ffc40000.ethernet: IRQ eth_lpi not found
[ 0.492870] rk_gmac-dwmac ffc40000.ethernet: clock input or output? (output).
[ 0.493511] rk_gmac-dwmac ffc40000.ethernet: Can not read property: tx_delay.
[ 0.494143] rk_gmac-dwmac ffc40000.ethernet: set tx_delay to 0x30
[ 0.494729] rk_gmac-dwmac ffc40000.ethernet: Can not read property: rx_delay.
[ 0.494783] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.495362] rk_gmac-dwmac ffc40000.ethernet: set rx_delay to 0x10
[ 0.496710] rk_gmac-dwmac ffc40000.ethernet: integrated PHY? (no).
[ 0.501374] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.502344] rk_gmac-dwmac ffc40000.ethernet: init for RMII
[ 0.503176] rk_gmac-dwmac ffc40000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 0.503184] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.503822] rk_gmac-dwmac ffc40000.ethernet: DWMAC4/5
[ 0.505108] rk_gmac-dwmac ffc40000.ethernet: DMA HW capability register supported
[ 0.505771] rk_gmac-dwmac ffc40000.ethernet: RX Checksum Offload Engine supported
[ 0.506433] rk_gmac-dwmac ffc40000.ethernet: TX Checksum insertion supported
[ 0.507056] rk_gmac-dwmac ffc40000.ethernet: Wake-Up On Lan supported
[ 0.507709] rk_gmac-dwmac ffc40000.ethernet: TSO supported
[ 0.508231] rk_gmac-dwmac ffc40000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 0.508945] rk_gmac-dwmac ffc40000.ethernet: Enabled RFS Flow TC (entries=10)
[ 0.509582] rk_gmac-dwmac ffc40000.ethernet: TSO feature enabled
[ 0.510117] rk_gmac-dwmac ffc40000.ethernet: Using 32/32 bits DMA host/device width
[ 0.520931] dwmmc_rockchip ffc70000.mmc: card claims to support voltages below defined range
[ 0.531709] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 0.532620] mmc2: error -110 whilst initialising SDIO card
[ 0.548019] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 0.561026] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 200000000Hz, actual 198000000HZ div = 0)
[ 0.590841] printk: console [netcon0] enabled
[ 0.591249] netconsole: network logging started
[ 0.592686] ALSA device list:
[ 0.592971] #0: Loopback 1
[ 0.593481] dw-apb-uart ff570000.serial: forbid DMA for kernel console
[ 1.064054] dwmmc_rockchip ffc50000.mmc: Busy; trying anyway
[ 1.068746] dwmmc_rockchip ffc70000.mmc: card claims to support voltages below defined range
[ 1.075108] mmc0: error -84 whilst initialising MMC card
[ 1.082941] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 1.083859] m[ 1.090165] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 1.099440] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 1.121056] dwmmc_rockchip ffc70000.mmc: card claims to support voltages below defined range
[ 1.141332] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 1.142247] mmc2: error -110 whilst initialising SDIO card
[ 1.157842] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[ 1.574904] Waiting for root device PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd...
[ 1.628015] phy phy-ff4c0000.usb2phy.0: charger = USB_SDP_CHARGER
[ 1.660573] dwmmc_rockchip ffc50000.mmc: Busy; trying anyway
[ 1.671466] dwmmc_rockchip ffc70000.mmc: card claims to support voltages below defined range
[ 1.675066] mmc0: error -84 whilst initialising MMC card
[ 1.690027] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 1.693129] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723
[ 1.697602] Bluetooth: hci0: RTL: rom_version status=0 version=2
[ 1.698170] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723ds_fw.bin
[ 1.698808] bluetot/rtl8723ds_fw.bin failed with error -2
[ 1.699604] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8723ds_fw.bin not found
[ 1.713356] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 1.714271] mmc2: error -110 whilst initialising SDIO card
[ 1.761962] dwmmc_rockchip ffc60000.mmc: Successfully tuned phase to 136
[ 1.762603] mmc1: new ultra high speed SDR104 SDHC card at address 0001
[ 1.764188] mmcblk1: mmc1:0001 SD32G 28.8 GiB
[ 2.267873] dwmmc_rockchip ffc50000.mmc: Busy; trying anyway
[ 2.271252] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 2.271953] GPT:4194303 != 60432383
[ 2.272274] GPT:Alternate GPT header not at the end of the disk.
[ 2.272807] GPT:4194303 != 32383
[ 2.273125] GPT: Use Grted to correct GPT errors.
[ 2.273643] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
[ 2.289411] mmc0: error -84 whilst initialising MMC card
[ 2.294079] VFS: Mounted root (squashfs filesystem) readonly on device 179:3.
[ 2.296725] devtmpfs: mounted
[ 2.298683] Freeing unused kernel image (initmem) memory: 1024K
[ 2.301606] Run /sbin/init as init process
[ 2.304484] mmc_host mmc0: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[ 2.907589] dwmmc_rockchip ffc50000.mmc: Busy; trying anyway
[ 2.950014] mmc0: error -84 whilst initialising MMC card
[ 3.072109] systemd[1]: System time before build time, advancing clock.
[ 3.147644] systemd[1]: MachineID '' is not valid, ignoring: Invalid argument
[ 3.155956] systemd[1]: systemd 252 running in system mode (+PAM -AUDIT -SELINUX +APPARMOR -IMA -SMACK +SECCOMP -GCRYPT -GNUTLS +OPENSSL -ACL +BLKID +CURL -ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ +ZLIB -ZSTD -BPF_FRAMEWORK -XKBCOMMON -UTMP -SYSVINIT default-hierarchy=unified)
[ 3.158840] systemd[1]: Detected architecture arm.
[ 3.159526] systemd[1]: Kernel commandline argument says we are in first boot.
Welcome to [1mHome Assistant OS 11.1.rc1.9[0m!
[ 3.171623] systemd[1]: Hostname set to <homeassistant>.
[ 3.174618] systemd[1]: Initializing machine ID from random generator.
[ 5.110230] systemd[1]: Populated /etc with preset unit settings.
[ 5.781016] systemd[1]: Queued start job for default target Multi-User System.
[ 5.819601] systemd[1]: Created slice Slice /system/ha-cli.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/ha-cli[0m.
[ 5.835568] systemd[1]: Created slice Slice /system/modprobe.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m.
[ 5.852175] systemd[1]: Created slice Slice /system/serial-getty.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/serial-getty[0m.
[ 5.868857] systemd[1]: Created slice Slice /system/systemd-fsck.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/systemd-fsck[0m.
[ 5.885546] systemd[1]: Created slice Slice /system/systemd-growfs.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/systemd-growfs[0m.
[ 5.900992] systemd[1]: Created slice User and Session Slice.
[[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m.
[ 5.915378] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[[0;32m OK [0m] Started [0;1;39mDispatch Password …ts to Console Directory Watch[0m.
[ 5.928540] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[[0;32m OK [0m] Started [0;1;39mForward Password R…uests to Wall Directory Watch[0m.
[ 5.942187] systemd[1]: Reached target Local Encrypted Volumes.
[[0;32m OK [0m] Reached target [0;1;39mLocal Encrypted Volumes[0m.
[ 5.955093] systemd[1]: Reached target HassOS hardware targets.
[[0;32m OK [0m] Reached target [0;1;39mHassOS hardware targets[0m.
[ 5.968188] systemd[1]: Reached target HassOS zram targets.
[[0;32m OK [0m] Reached target [0;1;39mHassOS zram targets[0m.
[ 5.981564] systemd[1]: Reached target Local Integrity Protected Volumes.
[[0;32m OK [0m] Reached target [0;1;39mLocal Integrity Protected Volumes[0m.
[ 5.995134] systemd[1]: Reached target NFS client services.
[[0;32m OK [0m] Reached target [0;1;39mNFS client services[0m.
[ 6.008324] systemd[1]: Reached target Path Units.
[[0;32m OK [0m] Reached target [0;1;39mPath Units[0m.
[ 6.021676] systemd[1]: Reached target Preparation for Remote File Systems.
[[0;32m OK [0m] Reached target [0;1;39mPreparation for Remote File Systems[0m.
[ 6.034877] systemd[1]: Reached target Remote Encrypted Volumes.
[[0;32m OK [0m] Reached target [0;1;39mRemote Encrypted Volumes[0m.
[ 6.048195] systemd[1]: Reached target Remote File Systems.
[[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m.
[ 6.061524] systemd[1]: Reached target Remote Verity Protected Volumes.
[[0;32m OK [0m] Reached target [0;1;39mRemote Verity Protected Volumes[0m.
[ 6.074910] systemd[1]: Reached target Slice Units.
[[0;32m OK [0m] Reached target [0;1;39mSlice Units[0m.
[ 6.088532] systemd[1]: Reached target Local Verity Protected Volumes.
[[0;32m OK [0m] Reached target [0;1;39mLocal Verity Protected Volumes[0m.
[ 6.103787] systemd[1]: Listening on D-Bus System Message Bus Socket.
[[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m.
[ 6.166327] systemd[1]: Listening on RPCbind Server Activation Socket.
[[0;32m OK [0m] Listening on [0;1;39mRPCbind Server Activation Socket[0m.
[ 6.178367] systemd[1]: Reached target RPC Port Mapper.
[[0;32m OK [0m] Reached target [0;1;39mRPC Port Mapper[0m.
[ 6.196150] systemd[1]: Listening on Process Core Dump Socket.
[[0;32m OK [0m] Listening on [0;1;39mProcess Core Dump Socket[0m.
[ 6.209515] systemd[1]: Listening on Journal Audit Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m.
[ 6.222545] systemd[1]: Listening on Journal Socket (/dev/log).
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m.
[ 6.235870] systemd[1]: Listening on Journal Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m.
[ 6.252434] systemd[1]: Listening on udev Control Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m.
[ 6.265716] systemd[1]: Listening on udev Kernel Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m.
[ 6.268264] systemd[1]: Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 6.291785] systemd[1]: Mounting POSIX Message Queue File System...
Mounting [0;1;39mPOSIX Message Queue File System[0m...
[ 6.302699] systemd[1]: Mounting Kernel Debug File System...
Mounting [0;1;39mKernel Debug File System[0m...
[ 6.315770] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
[ 6.348969] systemd[1]: Starting Create List of Static Device Nodes...
Starting [0;1;39mCreate List of Static Device Nodes[0m...
[ 6.369603] systemd[1]: Starting Load Kernel Module configfs...
Starting [0;1;39mLoad Kernel Module configfs[0m...
[ 6.389524] systemd[1]: Starting Load Kernel Module drm...
Starting [0;1;39mLoad Kernel Module drm[0m...
[ 6.415624] systemd[1]: Starting Load Kernel Module efi_pstore...
Starting [0;1;39mLoad Kernel Module efi_pstore[0m...
[ 6.426297] systemd[1]: Starting Load Kernel Module fuse...
Starting [0;1;39mLoad Kernel Module fuse[0m...
[ 6.452689] systemd[1]: Starting Journal Service...
Starting [0;1;39mJournal Service[0m...
[ 6.487245] systemd[1]: Starting Generate network units from Kernel command line...
Starting [0;1;39mGenerate network …ts from Kernel command line[0m...
[ 6.510550] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting [0;1;39mRemount Root and Kernel File Systems[0m...
[ 6.529252] systemd[1]: Starting Coldplug All udev Devices...
Starting [0;1;39mColdplug All udev Devices[0m...
[ 6.554571] systemd[1]: Starting Disk Manager...
Starting [0;1;39mDisk Manager[0m...
[ 6.577647] systemd[1]: Starting HassOS ZRAM tmp...
Starting [0;1;39mHassOS ZRAM tmp[0m...
[ 6.609139] systemd[1]: Starting HassOS ZRAM var...
Starting [0;1;39mHassOS ZRAM var[0m...
[ 6.646718] systemd[1]: Mounted POSIX Message Queue File System.
[[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m.
[ 6.662851] systemd[1]: Mounted Kernel Debug File System.
[[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m.
[ 6.666649] systemd[1]: Finished Create List of Static Device Nodes.
[[0;32m OK [0m] Finished [0;1;39mCreate List of Static Device Nodes[0m.
[ 6.670605] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 6.674793] systemd[1]: Finished Load Kernel Module configfs.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m.
[ 6.680761] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 6.686560] systemd[1]: Finished Load Kernel Module drm.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m.
[ 6.692404] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 6.696353] systemd[1]: Finished Load Kernel Module efi_pstore.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module efi_pstore[0m.
[ 6.703160] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 6.708356] systemd[1]: Finished Load Kernel Module fuse.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m.
[ 6.712288] systemd[1]: Finished Generate network units from Kernel command line.
[[0;32m OK [0m] Finished [0;1;39mGenerate network units from Kernel command line[0m.
[ 6.718582] systemd[1]: Finished Remount Root and Kernel File Systems.
[[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m.
[ 6.727317] zram2: detected capacity change from 0 to 32768
[ 6.738246] systemd[1]: Reached target Preparation for Network.
[[0;32m OK [0m] Reached target [0;1;39mPreparation for Network[0m.
[ 6.746122] zram1: detected capacity change from 0 to 65536
[ 6.752573] systemd[1]: FUSE Control File System was skipped because of an unmet condition check (ConditionPathExists=/sys/fs[ 6.771886] systemd[1]: Mounting Kernel Configuration File System...
Mounting [0;1;39mKernel Configuration File System[0m...
[ 6.789146] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting [0;1;39mCreate Static Device Nodes in /dev[0m...
[ 6.805684] systemd[1]: Mounted Kernel Configuration File System.
[[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m.
[ 6.988446] systemd[1]: Started Journal Service.
[[0;32m OK [0m] Started [0;1;39mJournal Service[0m.
Starting [0;1;39mD-Bus System Message Bus[0m...
[[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m.
[[0;32m OK [0m] Reached target [0;1;39mPreparation for Local File Systems[0m.
[ 7.126958] audit: type=1334 audit(1680605726.050:2): prog-id=6 op=LOAD
[ 7.128215] audit: type=1334 audit(1680605726.053:3): prog-id=7 op=LOAD
Starting [0;1;39mRule-based Manage…for Device Events and Files[0m...
[[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m.
[[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m.
[[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/zram2[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/ttyS2[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/disk/by-label/hassos-boot[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/disk/by-label/hassos-overlay[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/disk/by-label/hassos-data[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/ttyGS0[0m.
Starting [0;1;39mFile System Check…v/disk/by-label/hassos-boot[0m...
Starting [0;1;39mFile System Check…v/disk/by-label/hassos-data[0m...
Starting [0;1;39mFile System Check…isk/by-label/hassos-overlay[0m...
[[0;32m OK [0m] Finished [0;1;39mFile System Check…dev/disk/by-label/hassos-boot[0m.
Mounting [0;1;39mHassOS boot partition[0m...
[[0;32m OK [0m] Finished [0;1;39mFile System Check…dev/disk/by-label/hassos-data[0m.
Starting [0;1;39mHAOS data disk detach[0m...
[[0;32m OK [0m] Finished [0;1;39mFile System Check…/disk/by-label/hassos-overlay[0m.
[[0;32m OK [0m] Mounted [0;1;39mHassOS boot partition[0m.
Starting [0;1;39mHome Assistant OS Agent[0m...
[[0;32m OK [0m] Started [0;1;39mHome Assistant OS Agent[0m.
Mounting [0;1;39mHassOS overlay partition[0m...
[ 9.628669] EXT4-fs (mmcblk1p7): mounted filesystem with ordered data mode. Quota mode: disabled.
[[0;32m OK [0m] Mounted [0;1;39mHassOS overlay partition[0m.
Mounting [0;1;39mDropbear persistent keys[0m...
Mounting [0;1;39mKernel persistent modprobe.d[0m...
Mounting [0;1;39mKernel persistent modules-load.d[0m...
Mounting [0;1;39mUdev persistent rules.d[0m...
Mounting [0;1;39mDocker persistent user[0m...
Mounting [0;1;39mDropbear persistent user[0m...
Starting [0;1;39mHassOS data resizing[0m...
Starting [0;1;39mHassOS overlay setup[0m...
[[0;32m OK [0m] Mounted [0;1;39mDropbear persistent keys[0m.
[[0;32m OK [0m] Mounted [0;1;39mKernel persistent modprobe.d[0m.
[[0;32m OK [0m] Mounted [0;1;39mKernel persistent modules-load.d[0m.
[[0;32m OK [0m] Mounted [0;1;39mUdev persistent rules.d[0m.
[[0;32m OK [0m] Mounted [0;1;39mDocker persistent user[0m.
[[0;32m OK [0m] Mounted [0;1;39mDropbear persistent user[0m.
[[0;32m OK [0m] Reached target [0;1;39mSound Card[0m.
[[0;32m OK [0m] Reached target [0;1;39mHardware activated USB gadget[0m.
Starting [0;1;39mRetrigger udev rules after user rules mounted[0m...
Starting [0;1;39mLoad Kernel Module efi_pstore[0m...
Starting [0;1;39mLoad Kernel Module fuse[0m...
Starting [0;1;39mApply Kernel Variables[0m...
[[0;32m OK [0m] Finished [0;1;39mHassOS overlay setup[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module efi_pstore[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m.
Mounting [0;1;39mNetworkManager persistent system connections[0m...
Mounting [0;1;39mHostname persistent configuration[0m...
Mounting [0;1;39mHosts persistent configuration[0m...
Mounting [0;1;39mTimesyncd persistent configuration[0m...
[[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m.
[[0;32m OK [0m] Finished [0;1;39mHassOS ZRAM tmp[0m.
[[0;32m OK [0m] Finished [0;1;39mHassOS ZRAM var[0m.
[[0;32m OK [0m] Mounted [0;1;39mNetworkManager persistent system connections[0m.
[[0;32m OK [0m] Mounted [0;1;39mHostname persistent configuration[0m.
[[0;32m OK [0m] Mounted [0;1;39mHosts persistent configuration[0m.
[[0;32m OK [0m] Mounted [0;1;39mTimesyncd persistent configuration[0m.
[[0;32m OK [0m] Started [0;1;39mDisk Manager[0m.
[[0;32m OK [0m] Finished [0;1;39mRetrigger udev rules after user rules mounted[0m.
[[0;32m OK [0m] Stopped [0;1;39mFile System Check …dev/disk/by-label/hassos-data[0m.
Starting [0;1;39mLoad Kernel Module efi_pstore[0m...
Starting [0;1;39mLoad Kernel Module fuse[0m...
Starting [0;1;39mFile System Check…v/disk/by-label/hassos-data[0m...
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module efi_pstore[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m.
[[0;32m OK [0m] Finished [0;1;39mFile System Check…dev/disk/by-label/hassos-data[0m.
[[0m[0;31m* [0m] (1 of 2) A start job is running for…S data disk detach (2s / no limit)
M
[K[[0;32m OK [0m] Finished [0;1;39mHassOS data resizing[0m.
[K[[0;32m OK [0m] Finished [0;1;39mHAOS data disk detach[0m.
Mounting [0;1;39mHassOS data partition[0m...
[[0;32m OK [0m] Mounted [0;1;39mHassOS data partition[0m.
Starting [0;1;39mGrow File System on /mnt/data[0m...
[[0;32m OK [0m] Finished [0;1;39mGrow File System on /mnt/data[0m.
Starting [0;1;39mHAOS swap[0m...
[[0;1;31m*[0m[0;31m* [0m] A start job is running for HAOS swap (7s / no limit)
M
[K[[0;31m*[0;1;31m*[0m[0;31m* [0m] A start job is running for HAOS swap (8s / no limit)
[ 23.244572] mmc_host mmc1: Timeout sending command (cmd 0x200000 arg 0x0 status 0x80200000)
M
[K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] A start job is running for HAOS swap (8s / no limit)
M
[K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] A start job is running for HAOS swap (9s / no limit)
M
[K[ [0;31m*[0;1;31m*[0m[0;31m*[0m] A start job is running for HAOS swap (10s / no limit)
M
[K[ [0;31m*[0;1;31m*[0m] A start job is running for HAOS swap (10s / no limit)
M
[K[ [0;31m*[0m] A start job is running for HAOS swap (11s / no limit)
[ 26.310592] mmc1: Card stuck being busy! __mmc_poll_for_busy
M
[K[ [0;31m*[0;1;31m*[0m] A start job is running for HAOS swap (11s / no limit)
[ 26.811137] dwmmc_rockchip ffc60000.mmc: Busy; trying anyway
M
[K[ [0;31m*[0;1;31m*[0m[0;31m*[0m] A start job is running for HAOS swap (12s / no limit)
[ 27.311679] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80200000)
M
[K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] A start job is running for HAOS swap (12s / no limit)
[ 27.828523] dwmmc_rockchip ffc60000.mmc: Busy; trying anyway
[ 28.329053] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
M
[K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] A start job is running for HAOS swap (13s / no limit)
[ 28.829821] dwmmc_rockchip ffc60000.mmc: Busy; trying anyway
M
[K[[0;31m*[0;1;31m*[0m[0;31m* [0m] A start job is running for HAOS swap (14s / no limit)
[ 29.330350] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
M
[K[[0;1;31m*[0m[0;31m* [0m] A start job is running for HAOS swap (14s / no limit)
[ 29.831118] dwmmc_rockchip ffc60000.mmc: Busy; trying anyway
M
[K[[0m[0;31m* [0m] A start job is running for HAOS swap (15s / no limit)
[ 30.331660] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[ 30.348930] mmcblk1: recovery failed!
[ 30.349303] I/O error, dev mmcblk1, sector 2299904 op 0x1:(WRITE) flags 0x4000 physM
[K[[0;1;31m*[0m[0;31m* [0m] A start job is running for HAOS swap (15s / no limit)
[ 30.849443] dwmmc_rockchip ffc60000.mmc: Busy; trying anyway
M
[K[[0;31m*[0;1;31m*[0m[0;31m* [0m] A start job is running for HAOS swap (16s / no limit)There seem to be errors reading the SD Card in the latest logs. Can you try a different SD Card?
Atleast the panics on missing cpu cores seem to be gone.
riddik14
commented
12 months ago U-Boot 2023.10 (Nov 12 2023 - 01:52:55 +0000)
Model: Sonoff iHost DRAM: 2 GiB PMIC: RK8090 (on=0x40, off=0x00) Core: 99 devices, 20 uclasses, devicetree: separate MMC: mmc@ffc50000: 0, mmc@ffc60000: 1 Loading Environment from MMC... Card did not respond to voltage select! : -110 *** Warning - No block device, using default environment
Loading Environment from nowhere... OK In: serial@ff570000 Out: serial@ff570000 Err: serial@ff570000 Model: Sonoff iHost cpuid: 4b413234363200000000000000061130 cpu code: 1109 Net: No ethernet found. ** Booting bootflow 'mmc@ffc60000.bootdev.part_1' with script switch to partitions #0, OK mmc1 is current device loading env...
MMC read: dev # 1, block # 1214464, count 64 ... 64 blocks read: OK
0 bytes read in 0 ms 59 bytes read in 2 ms (28.3 KiB/s) Detected SoC RV1109 Loading standard device tree rv1109-sonoff-ihost.dtb 36122 bytes read in 5 ms (6.9 MiB/s) Working FDT set to 8300000 Trying to boot slot A, 2 attempts remaining. Loading kernel ... 7956144 bytes read in 422 ms (18 MiB/s) storing env...
MMC write: dev # 1, block # 1214464, count 64 ... 64 blocks written: OK Starting kernel Kernel image @ 0x2008000 [ 0x000000 - 0x7966b0 ]
Booting using the fdt blob at 0x8300000 Working FDT set to 8300000 Loading Device Tree to 0ff8d000, end 0fffefff ... OK Working FDT set to ff8d000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 6.1.62 (builder@f3d410a86cde) (arm-buildroot-liux-gnueabihf-gcc.br_real (Buildroot 2022.02-5845-g1dcee53f5d) 11d (GNU Binutils) 2.38) #1 SMP PR Nov 12 01:47:25 UTC 2023 [ 7 Processor [410fc075] revision (ARMv7), cr=10c5387d [ 0.00le: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.0000000000] earlycon: uart8250 at MMIO32 0xff570000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000]cy: Data cache writealloc [ 0.000000] cma: Reserved 32 MiB at 0x7e000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Movable zone start for e[ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x00000000083fffff] [ 0.000000] node 0: [mem 0x000000000a400000-0x000000007fffffff] [ 0. Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff[ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 12 pages/cpu s20180 r8192 d20780 u49152 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 513792 [ 0.000000] Kernel command line: zram.enabled=1 zram.num_devices=3 net.naming-scheme=v250 systemd.machine_id= fsck.repair=yes systemd.condition-first-boot=true root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rootwait rauc.slot=A earlycon=uart8250,mmio32,0xff570000 console=ttyS2,1500000n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1997036K/2064384K available (10240K kernel code, 744K rwdata, 2508K rodata, 1024K init, 308K bss, 34580K [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2[ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0eduler-enlistment delay is 30 jiffies. [ 0.000000] rcu: Adju NR_IRQS: 16, nr_irqs: 16, preal: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000753] Switching to timer-based delay loop, resolution 41ns [ 0.001651] Failed to get pclk for 'rk_timer' [ 0.002705] Console: colour dummy device 80x30 [ 0.003178] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 0.004140] CPU: Testing write buffer coherency: ok [ 0.004644] pid_max: default: 32768 minimum: 301 [ 0.005174] LSM: Security Framework initializing [ 0.005737] AppArmor: AppArmor initializ[ 0.006279] Mount-cache hash entries: 2048 (order: 1, 8192 by Mountpoint-cache hash table ent[ 0.008967] /cpus/cpu@f00 missing clock-frequency property [ 0.009562] /cpus/cpu@f01 missing clock-frequency property [ 0.010089] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.011698] cblist_init_generic: Setting adjustable number of callback queues. [ 0.012377] cblist_init_generic: Setting shift to 1 and lim to 1. [ 0.013120] cblist_init_generic: Setting adjustable number of callbaand lim to 1. [ 0.014513] Setting up static identity map for 0x100000 - 0x100060 [ 0.015262] rcu: Hierarchical SRCU implementation. [ 0.015712] rcu: Max phase no-delay instances is 1000. [ 0.016776] smp: Bringing up secondary CPUs ... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot [ 0.018821] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.018976] smp: Brought up 1 node, 2 CPUs [ 0.019963] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.020544] CPU: All CPU(s) started in SVC mode. [ 0.021778] devtmpfs: initialized [ 0.030692] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.031690] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.032662] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.034827] pinctrl core: initialized pinctrl subsystem [ 0.036966] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.039049] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.040408] audit: initializing netlink subsys (disabled) [ 0.041206] audit: type=2000 audit(0.039:1): state=initialized audit_enabled=0 res=1 [ 0.042448] thermal_sys: Registered thermal governor 'step_wise' [ 0.042460] thermal_sys: Registered thermal governor 'user_space' [ 0.043128] cpuidle: using governor menu [ 0.044263] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.045012] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.049181] rockchip-pm-domain ff3e0000.power-management:power-controller: power-domain: failed to get clk at index 0: -517 [ 0.050250] rockchip-pm-domain ff3e0000.power-management:power-controller: failed to handle node power-domain: -517 [ 0.080645] cryptd: max_cpu_qlen set to 1000 [ 0.082650] iommu: Default domain type: Translated [ 0.083116] iommu: DMA domain TLB invalidation policy: strict mode [ 0.084100] SCSI subsystem initialized [ 0.084695] usbcore: registered new interface driver usbfs [ 0.085260] usbcore: registered new interface driver hub [ 0.085801] usbcore: registered new device driver usb [ 0.086403] mc: Linux media interface: v0.10 [ 0.086868] videodev: Linux video capture interface: v2.00 [ 0.087480] pps_core: LinuxPPS API ver. 1 registered [ 0.087947] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.088810] PTP clock support registered [ 0.089734] Advanced Linux Sound Architecture Driver Initialized. [ 0.090960] Bluetooth: Core ver 2.22 [ 0.091350] NET: Registered PF_BLUETOOTH protocol family [ 0.091846] Bluetooth: HCI device and connection manager initialized [ 0.092444] Bluetooth: HCI socket layer initialized [ 0.092903] Bluetooth: L2CAP socket layer initialized [ 0.093392] Bluetooth: SCO socket layer initialized [ 0.094670] clocksource: Switched to clocksource arch_sys_counter [ 0.096123] AppArmor: AppArmor Filesystem Enabled [ 0.109413] NET: Registered PF_INET protocol family [ 0.110176] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.113625] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.114491] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.115260] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.116067] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.116981] TCP: Hash tables configured (established 8192 bind 8192) [ 0.117697] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.118405] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.119287] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.120515] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.122814] Initialise system trusted keyrings [ 0.123560] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.132811] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.249031] Key type asymmetric registered [ 0.249430] Asymmetric key parser 'x509' registered [ 0.250094] bounce: pool size: 64 pages [ 0.250593] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.251556] io scheduler mq-deadline registered [ 0.251988] io scheduler kyber registered [ 0.273445] dma-pl330 ff4e0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.274173] dma-pl330 ff4e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 0.276113] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 0.279996] ff560000.serial: ttyS0 at MMIO 0xff560000 (irq = 33, base_baud = 1500000) is a 16550A [ 0.281046] serial serial0: tty port ttyS0 registered [ 0.282482] ff570000.serial: ttyS2 at MMIO 0xff570000 (irq = 34, base_baud = 1500000) is a 16550A [ 0.283503] printk: console [ttyS2] enabled [ 0.283503] printk: console [ttyS2] enabled [ 0.284272] printk: bootconsole [uart8250] disabled [ 0.284272] printk: bootconsole [uart8250] disabled [ 0.286359] ff580000.serial: ttyS3 at MMIO 0xff580000 (irq = 35, base_baud = 1500000) is a 16550A [ 0.288266] ff590000.serial: ttyS4 at MMIO 0xff590000 (irq = 36, base_baud = 1500000) is a 16550A [ 0.299352] loop: module loaded [ 0.300274] zram: Added device: zram0 [ 0.301190] zram: Added device: zram1 [ 0.302167] zram: Added device: zram2 [ 0.303959] tun: Universal TUN/TAP device driver, 1.6 [ 0.307233] usbcore: registered new interface driver usb-storage [ 0.307879] usbcore: registered new interface driver usbserial_generic [ 0.308531] usbserial: USB Serial support registered for generic [ 0.309238] UDC core: g_serial: couldn't find an available UDC [ 0.309935] i2c_dev: i2c /dev entries driver [ 0.311593] i2c 0-0020: Fixed dependency cycle(s) with /i2c@ff3f0000/pmic@20/regulators/DCDC_REG4 [ 0.312411] i2c 0-0020: Fixed dependency cycle(s) with /i2c@ff3f0000/pmic@20/regulators/DCDC_REG5 [ 0.315132] Driver for 1-wire Dallas network protocol. [ 0.316767] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.317747] Bluetooth: HCI UART driver ver 2.3 [ 0.318204] Bluetooth: HCI UART protocol H4 registered [ 0.318723] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 0.319636] Synopsys Designware Multimedia Card Interface Driver [ 0.320674] hid: raw HID events driver (C) Jiri Kosina [ 0.321983] usbcore: registered new interface driver usbhid [ 0.322486] usbhid: USB HID core driver [ 0.329070] IPVS: Registered protocols () [ 0.329513] IPVS: Connection hash table configured (size=4096, memory=16Kbytes)[ 0.330360] IPVS: ipvs loaded. [ 0.330646] IPVS: [rr] scheduler registered. [ 0.331915] NET: Registered PF_INET6 protocol family [ 0.333933] Segment Routing with IPv6 [ 0.334341] In-situ OAM (IOAM) with IPv6 [ 0.334936] NET: Registered PF_PACKET protocol family [ 0.335406] NET: Registered PF_KEY protocol family [ 0.335906] Bridge firewalling registered [ 0.336321] Key type dns_resolver registered [ 0.336849] Registering SWP/SWPB emulation handler [ 0.339691] Loading compiled-in X.509 certificates [ 0.340789] zswap: loaded using pool lz4/zsmalloc [ 0.343855] AppArmor: AppArmor sha1 policy hashing enabled [ 0.379713] rockchip-gpio ff460000.gpio: probed /pinctrl/gpio@ff460000 [ 0.380838] rockchip-gpio ff620000.gpio: probed /pinctrl/gpio@ff620000 [ 0.381479] dw-apb-uart ff560000.serial: Failed to create device link (0x180) with ff620000.gpio [ 0.382764] rockchip-gpio ff630000.gpio: probed /pinctrl/gpio@ff630000 [ 0.383826] rockchip-gpio ff640000.gpio: probed /pinctrl/gpio@ff640000 [ 0.384923] rockchip-gpio ff650000.gpio: probed /pinctrl/gpio@ff650000 [ 0.387042] phy phy-ff4c0000.usb2phy.0: Failed to get VBUS supply regulator [ 0.398980] g_serial gadget.0: Gadget Serial v2.4 [ 0.399424] g_serial gadget.0: g_serial ready [ 0.403655] rk808 0-0020: chip id: 0x8090 [ 0.406357] ehci-platform ffe00000.usb: EHCI Host Controller [ 0.406361] ohci-platform ffe10000.usb: Generic Platform OHCI controller [ 0.406395] ohci-platform ffe10000.usb: new USB bus registered, assigned bus number 1 [ 0.406886] ehci-platform ffe00000.usb: new USB bus registered, assigned bus number 2 [ 0.409095] ohci-platform ffe10000.usb: irq 52, io mem 0xffe10000 [ 0.409924] ehci-platform ffe00000.usb: irq 50, io mem 0xffe00000 [ 0.421381] ehci-platform ffe00000.usb: USB 2.0 started, EHCI 1.00 [ 0.422226] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.423007] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.423677] usb usb2: Product: EHCI Host Controller [ 0.424160] usb usb2: Manufacturer: Linux 6.1.62 ehci_hcd [ 0.424696] usb usb2: SerialNumber: ffe00000.usb [ 0.426024] hub 2-0:1.0: USB hub found [ 0.426438] hub 2-0:1.0: 1 port detected [ 0.433684] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 0.434269] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 0.449874] vcc_dvdd: Bringing 1100000uV into 1200000-1200000uV [ 0.458856] input: rk805 pwrkey as /devices/platform/ff3f0000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0 [ 0.462356] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable. [ 0.463291] rtc-pcf8563 2-0051: registered as rtc0 [ 0.464057] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable. [ 0.464762] rtc-pcf8563 2-0051: hctosys: unable to read the hardware clock [ 0.469003] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 0.469770] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.470438] usb usb1: Product: Generic Platform OHCI controller [ 0.470683] dwmmc_rockchip ffc50000.mmc: IDMAC supports 32-bit address mode. [ 0.470968] usb usb1: Manufacturer: Linux 6.1.62 ohci_hcd [ 0.472134] usb usb1: SerialNumber: ffe10000.usb [ 0.472215] dwmmc_rockchip ffc50000.mmc: Using internal DMA controller. [ 0.473141] dwmmc_rockchip ffc50000.mmc: Version ID is 270a [ 0.473265] hub 1-0:1.0: USB hub found [ 0.473704] dwmmc_rockchip ffc50000.mmc: DW MMC controller at irq 79,32 bit host data width,256 deep fifo [ 0.474011] hub 1-0:1.0: 1 port detected [ 0.476639] dwmmc_rockchip ffc60000.mmc: IDMAC supports 32-bit address mode. [ 0.476700] dwmmc_rockchip ffc70000.mmc: IDMAC supports 32-bit address mode. [ 0.478058] dwmmc_rockchip ffc60000.mmc: Using internal DMA controller. [ 0.478732] dwmmc_rockchip ffc70000.mmc: Using internal DMA controller. [ 0.478951] dwmmc_rockchip ffc60000.mmc: Version ID is 270a [ 0.479339] dwmmc_rockchip ffc70000.mmc: Version ID is 270a [ 0.479936] mmc_host mmc0: card is non-removable. [ 0.480430] dwmmc_rockchip ffc60000.mmc: DW MMC controller at irq 80,32 bit host data width,256 deep fifo [ 0.480983] dwmmc_rockchip ffc70000.mmc: DW MMC controller at irq 81,32 bit host data width,256 deep fifo [ 0.484200] dwmmc_rockchip ffc70000.mmc: allocated mmc-pwrseq [ 0.484975] mmc_host mmc2: card is non-removable. [ 0.489374] rk_gmac-dwmac ffc40000.ethernet: IRQ eth_lpi not found [ 0.490431] rk_gmac-dwmac ffc40000.ethernet: clock input or output? (output). [ 0.491073] rk_gmac-dwmac ffc40000.ethernet: Can not read property: tx_delay. [ 0.491759] rk_gmac-dwmac ffc40000.ethernet: set tx_delay to 0x30 [ 0.492307] rk_gmac-dwmac ffc40000.ethernet: Can not read property: rx_delay. [ 0.492937] rk_gmac-dwmac ffc40000.ethernet: set rx_delay to 0x10 [ 0.493491] rk_gmac-dwmac ffc40000.ethernet: integrated PHY? (no). [ 0.494734] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.496214] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.499140] rk_gmac-dwmac ffc40000.ethernet: init for RMII [ 0.499912] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.500807] rk_gmac-dwmac ffc40000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 0.501484] rk_gmac-dwmac ffc40000.ethernet: DWMAC4/5 [ 0.501951] rk_gmac-dwmac ffc40000.ethernet: DMA HW capability register supported [ 0.502613] rk_gmac-dwmac ffc40000.ethernet: RX Checksum Offload Engine supported [ 0.503275] rk_gmac-dwmac ffc40000.ethernet: TX Checksum insertion supported [ 0.503899] rk_gmac-dwmac ffc40000.ethernet: Wake-Up On Lan supported [ 0.504555] rk_gmac-dwmac ffc40000.ethernet: TSO supported [ 0.505070] rk_gmac-dwmac ffc40000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.505784] rk_gmac-dwmac ffc40000.ethernet: Enabled RFS Flow TC (entries=10) [ 0.506419] rk_gmac-dwmac ffc40000.ethernet: TSO feature enabled [ 0.506953] rk_gmac-dwmac ffc40000.ethernet: Using 32/32 bits DMA host/device width [ 0.517591] dwmmc_rockchip ffc70000.mmc: card claims to support voltages below defined range [ 0.528445] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 0.529364] mmc2: error -110 whilst initialising SDIO card [ 0.544750] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0) [ 0.587524] printk: console [netcon0] enabled [ 0.587933] netconsole: network logging started [ 0.589369] ALSA device list: [ 0.589654] #0: Loopback 1 [ 0.590169] dw-apb-uart ff570000.serial: forbid DMA for kernel console [ 1.056108] dwmmc_rockchip ffc50000.mmc: Busy; trying anyway [ 1.062736] dwmmc_rockchip ffc70000.mmc: card claims to support voltages below defined range [ 1.067126] mmc0: error -84 whilst initialising MMC card [ 1.076731] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.077649] mng SDIO card [ 1.082059] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0) [ 1.085179] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 200000000Hz, actual 198000000HZ div = 0) [ 1.091565] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0) [ 1.092560] Waiting53e3-6d49-4c38-8349-aff6859e82fd... [ 1.112870] dwmmc_rockchip ffc70000.mmc: card claims to support voltages below defined range [ 1.132936] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.133853] mmc2: error -110 whilst initialising SDIO card [ 1.149460] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0) [ 1.652320] dwmmc_rockchip ffc50000.mmc: Busy; trying anyway [ 1.663274] dwmmc_rockchip ffc70000.mmc: card claims to support voltages below defined range [ 1.704840] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723 [ 2.166772] mmc_host mmc0: Timeout sending command (cmd 0x200000 arg 0x0 status 0x80200000) [ 2.167695] mmc0: error -84 w[ 2.169906] dwmmc_rockchip ffc60000.mmc: Successfully tuned phase to 134 [ 2.170537] mmc1: new ultra high speed SDR104 SDaddress aaaa [ 2.172123] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 2.172261] mmcblk1: mmc1:aaaa SB32G 29.7 GiB [ 2.172680] Bluetooth: i0: RTL: loading rtl_bt/rtl8723d[ 2.172806] bluetooth hci0: D[ 2.179182] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.179853] GPT:4194303 != 62333951 [ [ 2.181582] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 [ 2.194036] VFS: Mounted root (squashfs filesystem) readonly on device 179:3. [ 2.196262] devtmpfs: mounted [ 2.198260] Freeing unused kernel image (initmem) memory: 1024K [ 2.201639] Run /sbin/init as init process [ 2.204723] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.205653] m error -110 whilst initialising [ 2.454196] systemd[1]: System time before build time, advancing clock. [ 2.522162] systemd[1]: MachineID '' is not valid, ignoring: Invalid argument [ 2.530177] systemd[1]: systemd 252 running in system mode (+PAM -AUDIT -SELINUX +APPARMOR -IMA -SMACK +SECCOMP -GCRYPT -GNUTLS +OPENSSL -ACL +BLKID +CURL -ELFUTILS -FIDO2 -IDN2 -IDN +IPTC OD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ +ZLIB -ZSTD -BPF_FRAMEWORK -XKBCOMMON -UTMP -SYSVINIT default-hierarchy=unified) [ 2.533054] systemd[1]: Detected architecture arm. [ 2.533747] systemd[1]: Kernel commandline argument says we are in first boot.
Welcome to [1mHome Assistant OS 11.1.rc1.9[0m!
[ 2.545993] systemd[1]: Hostname set to
Welcome to Home Assistant
riddik14
commented
12 months ago s6-rc: info: service s6rc-oneshot-runner: starting s6-rc: info: service s6rc-oneshot-runner successfully started s6-rc: info: service fix-attrs: starting s6-rc: info: service fix-attrs successfully started s6-rc: info: service legacy-cont-init: starting cont-init: info: running /etc/cont-init.d/udev.sh INFO: Using udev information from host cont-init: info: /etc/cont-init.d/udev.sh exited 0 s6-rc: info: service legacy-cont-init successfully started s6-rc: info: service legacy-services: starting services-up: info: copying legacy longrun supervisor (no readiness notification) services-up: info: copying legacy longrun watchdog (no readiness notification) s6-rc: info: service legacy-services successfully started INFO: Starting local supervisor watchdog... [main] Initializing Supervisor setup [supervisor.docker.network] Can't find Supervisor network, creating a new network [supervisor.bootstrap] Seting up coresys for machine: tinker [supervisor.docker.supervisor] Attaching to Supervisor ghcr.io/home-assistant/armv7-hassio-supervisor with version 2023.11.0 [supervisor.docker.supervisor] Connecting Supervisor to hassio-network [supervisor.resolution.evaluate] Starting system evaluation with state initialize [supervisor.resolution.evaluate] System evaluation complete [main] Setting up Supervisor [supervisor.api] Starting API on 172.30.32.2 [supervisor.hardware.monitor] Started Supervisor hardware monitor [supervisor.dbus.manager] Connected to system D-Bus. [supervisor.dbus.agent] Load dbus interface io.hass.os [supervisor.dbus.hostname] Load dbus interface org.freedesktop.hostname1 [supervisor.dbus.logind] Load dbus interface org.freedesktop.login1 [supervisor.dbus.network] Load dbus interface org.freedesktop.NetworkManager [supervisor.dbus.rauc] Load dbus interface de.pengutronix.rauc [supervisor.dbus.resolved] Load dbus interface org.freedesktop.resolve1 [supervisor.dbus.systemd] Load dbus interface org.freedesktop.systemd1 [supervisor.dbus.timedate] Load dbus interface org.freedesktop.timedate1 [supervisor.host.services] Updating service information [supervisor.host.sound] Updating PulseAudio information [supervisor.host.sound] Can't update PulseAudio data: Failed to connect to pulseaudio server [supervisor.host.network] Updating local network information [supervisor.host.apparmor] Loading AppArmor Profiles: {'hassio-supervisor'} [supervisor.docker.monitor] Started docker events monitor [supervisor.updater] Fetching update data from https://version.home-assistant.io/stable.json [supervisor.docker.interface] Found ghcr.io/home-assistant/armv7-hassio-cli versions: [] [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-cli with version 2023.10.0 [supervisor.plugins.cli] Starting CLI plugin [supervisor.docker.cli] Starting CLI ghcr.io/home-assistant/armv7-hassio-cli with version 2023.10.0 - 172.30.32.5 [supervisor.docker.interface] Found ghcr.io/home-assistant/armv7-hassio-dns versions: [] [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-dns with version 2023.06.2 [supervisor.plugins.dns] Starting CoreDNS plugin [supervisor.docker.dns] Starting DNS ghcr.io/home-assistant/armv7-hassio-dns with version 2023.06.2 - 172.30.32.3 [supervisor.plugins.dns] Updated /etc/resolv.conf [supervisor.docker.interface] Found ghcr.io/home-assistant/armv7-hassio-audio versions: [] [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-audio with version 2023.10.0 [supervisor.plugins.audio] Starting Audio plugin [supervisor.docker.audio] Starting Audio ghcr.io/home-assistant/armv7-hassio-audio with version 2023.10.0 - 172.30.32.4 [supervisor.docker.interface] Found ghcr.io/home-assistant/armv7-hassio-observer versions: [] [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-observer with version 2023.06.0 [supervisor.plugins.observer] Starting observer plugin [supervisor.docker.observer] Starting Observer ghcr.io/home-assistant/armv7-hassio-observer with version 2023.06.0 - 172.30.32.6 [supervisor.docker.interface] Found ghcr.io/home-assistant/armv7-hassio-multicast versions: [] [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-multicast with version 2023.06.2 [supervisor.plugins.multicast] Starting Multicast plugin [supervisor.docker.multicast] Starting Multicast ghcr.io/home-assistant/armv7-hassio-multicast with version 2023.06.2 - Host [supervisor.homeassistant.secrets] Loaded 0 Home Assistant secrets [supervisor.docker.interface] No version found for ghcr.io/home-assistant/tinker-homeassistant [supervisor.homeassistant.core] No Home Assistant Docker image ghcr.io/home-assistant/tinker-homeassistant found. [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/tinker-homeassistant with version landingpage [supervisor.homeassistant.core] Using preinstalled landingpage [supervisor.homeassistant.core] Starting HomeAssistant landingpage [supervisor.homeassistant.module] Update pulse/client.config: /data/tmp/homeassistant_pulse [supervisor.docker.homeassistant] Starting Home Assistant ghcr.io/home-assistant/tinker-homeassistant with version landingpage CRITICAL (MainThread) [supervisor.core] Fatal error happening on load Task : Can't compare and [supervisor.store.git] Cloning add-on https://github.com/esphome/home-assistant-addon repository [supervisor.store.git] Cloning add-on https://github.com/home-assistant/addons repository [supervisor.store.git] Cloning add-on https://github.com/hassio-addons/repository repository [supervisor.addons.validate] Add-on config using incompatible map options, 'addon_config' and 'homeassistant_config' are ignored if 'config' is included. Please report this to the maintainer of Terminal & SSH [supervisor.addons.validate] Add-on config using incompatible map options, 'addon_config' and 'homeassistant_config' are ignored if 'config' is included. Please report this to the maintainer of Advanced SSH & Web Terminal [supervisor.addons.validate] Add-on config using incompatible map options, 'addon_config' and 'homeassistant_config' are ignored if 'config' is included. Please report this to the maintainer of Studio Code Server [supervisor.store] Loading add-ons from store: 71 all - 71 new - 0 remove [supervisor.addons] Found 0 installed add-ons [supervisor.backups.manager] Found 0 backup files [supervisor.discovery] Loaded 0 messages [supervisor.ingress] Loaded 0 ingress sessions [supervisor.resolution.check] Starting system checks with state setup [supervisor.resolution.check] System checks complete [supervisor.resolution.evaluate] Starting system evaluation with state setup [supervisor.resolution.evaluate] Error during processing network_manager: Can't compare and [supervisor.resolution.evaluate] Error during processing systemd_journal: Can't compare and [supervisor.resolution.evaluate] Error during processing systemd: Can't compare and [supervisor.resolution.evaluate] Error during processing os_agent: Can't compare and [supervisor.resolution.evaluate] System evaluation complete [supervisor.jobs] 'ResolutionFixup.run_autofix' blocked from execution, system is not healthy - setup [supervisor.resolution.evaluate] Starting system evaluation with state setup [supervisor.resolution.evaluate] Error during processing network_manager: Can't compare and [supervisor.resolution.evaluate] Error during processing systemd_journal: Can't compare and [supervisor.resolution.evaluate] Error during processing systemd: Can't compare and [supervisor.resolution.evaluate] Error during processing os_agent: Can't compare and [supervisor.resolution.evaluate] System evaluation complete [main] Running Supervisor CRITICAL (MainThread) [supervisor.core] System is running in an unhealthy state and needs manual intervention! [supervisor.os.manager] Rauc: A - marked slot kernel.0 as good [supervisor.addons] Phase 'initialize' starting 0 add-ons [supervisor.addons] Phase 'system' starting 0 add-ons [supervisor.addons] Phase 'services' starting 0 add-ons [supervisor.core] Skipping start of Home Assistant [supervisor.addons] Phase 'application' starting 0 add-ons [supervisor.misc.tasks] All core tasks are scheduled [supervisor.core] Supervisor is up and running [supervisor.homeassistant.core] Home Assistant setup [supervisor.docker.interface] Updating image ghcr.io/home-assistant/tinker-homeassistant:landingpage to ghcr.io/home-assistant/tinker-homeassistant:2023.11.2 [supervisor.docker.interface] Downloading docker image ghcr.io/home-assistant/tinker-homeassistant with tag 2023.11.2. [supervisor.host.info] Updating local host information [supervisor.updater] Fetching update data from https://version.home-assistant.io/stable.json [supervisor.resolution.check] Starting system checks with state running [supervisor.resolution.checks.base] Run check for dns_server_ipv6_error/dns_server [supervisor.resolution.checks.base] Run check for ipv4_connection_problem/system [supervisor.resolution.checks.base] Run check for docker_config/system [supervisor.resolution.checks.base] Run check for no_current_backup/system [supervisor.resolution.module] Create new suggestion create_full_backup - system / None [supervisor.resolution.module] Create new issue no_current_backup - system / None [supervisor.resolution.checks.base] Run check for multiple_data_disks/system [supervisor.resolution.module] Create new suggestion rename_data_disk - system / /dev/mmcblk1p8 [supervisor.resolution.module] Create new issue multiple_data_disks - system / /dev/mmcblk1p8 [supervisor.resolution.checks.base] Run check for free_space/system [supervisor.resolution.checks.base] Run check for trust/supervisor [supervisor.updater] Board 'ihost' not found in version file. No OS updates. [supervisor.resolution.checks.base] Run check for dns_server_failed/dns_server [supervisor.resolution.checks.base] Run check for pwned/addon [supervisor.resolution.checks.base] Run check for security/core [supervisor.resolution.check] System checks complete [supervisor.resolution.evaluate] Starting system evaluation with state running [aiohttp.server] Error handling request Traceback (most recent call last): File "/usr/local/lib/python3.11/site-packages/aiohttp/web_protocol.py", line 433, in _handle_request resp = await request_handler(request) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/site-packages/aiohttp/web_app.py", line 504, in _handle resp = await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/site-packages/aiohttp/web_middlewares.py", line 117, in impl return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/api/middleware/security.py", line 185, in block_bad_requests return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/api/middleware/security.py", line 201, in system_validation return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/api/middleware/security.py", line 268, in token_validation return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/api/middleware/security.py", line 280, in core_proxy return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/api/utils.py", line 62, in wrap_api answer = await method(api, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/api/host.py", line 74, in info ATTR_FEATURES: self.sys_host.features, ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/host/manager.py", line 78, in features return self.supported_features() ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/host/manager.py", line 120, in supported_features or self.sys_os.version >= AwesomeVersion("10.2") ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/site-packages/awesomeversion/awesomeversion.py", line 205, in ge return self.eq(compareto) or self.gt(compareto) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/site-packages/awesomeversion/awesomeversion.py", line 192, in gt raise AwesomeVersionCompareException( awesomeversion.exceptions.AwesomeVersionCompareException: Can't compare and [supervisor.resolution.evaluate] Error during processing network_manager: Can't compare and [supervisor.resolution.evaluate] System evaluation complete [supervisor.jobs] 'ResolutionFixup.run_autofix' blocked from execution, system is not healthy - setup [supervisor.host.services] Updating service information [supervisor.host.network] Updating local network information [supervisor.host.sound] Updating PulseAudio information [supervisor.host.sound] Can't update PulseAudio data: Failed to connect to pulseaudio server [supervisor.host.manager] Host information reload completed
riddik14
commented
12 months ago boot from usb sata disk?
darkxst
commented
12 months ago boot from usb sata disk?
no, booting from usb is not supported.
Does it boot ok now? can take 10-15mins or so before the landing page is active on http://homeassistant.local:8123
riddik14
commented
12 months ago Yes. Boot it's work. Hassio onboarding page error
riddik14
commented
12 months ago write this image in boot version for emmc?
riddik14
commented
12 months ago s6-rc: info: service s6rc-oneshot-runner: starting s6-rc: info: service s6rc-oneshot-runner successfully started s6-rc: info: service fix-attrs: starting s6-rc: info: service fix-attrs successfully started s6-rc: info: service legacy-cont-init: starting cont-init: info: running /etc/cont-init.d/udev.sh [12:16:11] INFO: Using udev information from host cont-init: info: /etc/cont-init.d/udev.sh exited 0 s6-rc: info: service legacy-cont-init successfully started s6-rc: info: service legacy-services: starting services-up: info: copying legacy longrun supervisor (no readiness notification) services-up: info: copying legacy longrun watchdog (no readiness notification) s6-rc: info: service legacy-services successfully started [12:16:11] INFO: Starting local supervisor watchdog... 23-11-12 12:16:24 INFO (MainThread) [main] Initializing Supervisor setup 23-11-12 12:16:24 INFO (MainThread) [supervisor.docker.network] Can't find Supervisor network, creating a new network 23-11-12 12:16:25 INFO (MainThread) [supervisor.bootstrap] Seting up coresys for machine: tinker 23-11-12 12:16:25 INFO (MainThread) [supervisor.docker.supervisor] Attaching to Supervisor ghcr.io/home-assistant/armv7-hassio-supervisor with version 2023.11.0 23-11-12 12:16:25 INFO (MainThread) [supervisor.docker.supervisor] Connecting Supervisor to hassio-network 23-11-12 12:16:25 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state initialize 23-11-12 12:16:25 INFO (MainThread) [supervisor.resolution.evaluate] System evaluation complete 23-11-12 12:16:25 INFO (MainThread) [main] Setting up Supervisor 23-11-12 12:16:26 INFO (MainThread) [supervisor.api] Starting API on 172.30.32.2 23-11-12 12:16:26 INFO (MainThread) [supervisor.hardware.monitor] Started Supervisor hardware monitor 23-11-12 12:16:26 INFO (MainThread) [supervisor.dbus.manager] Connected to system D-Bus. 23-11-12 12:16:26 INFO (MainThread) [supervisor.dbus.agent] Load dbus interface io.hass.os 23-11-12 12:16:26 INFO (MainThread) [supervisor.dbus.hostname] Load dbus interface org.freedesktop.hostname1 23-11-12 12:16:26 INFO (MainThread) [supervisor.dbus.logind] Load dbus interface org.freedesktop.login1 23-11-12 12:16:26 INFO (MainThread) [supervisor.dbus.network] Load dbus interface org.freedesktop.NetworkManager 23-11-12 12:16:26 INFO (MainThread) [supervisor.dbus.rauc] Load dbus interface de.pengutronix.rauc 23-11-12 12:16:26 INFO (MainThread) [supervisor.dbus.resolved] Load dbus interface org.freedesktop.resolve1 23-11-12 12:16:26 INFO (MainThread) [supervisor.dbus.systemd] Load dbus interface org.freedesktop.systemd1 23-11-12 12:16:26 INFO (MainThread) [supervisor.dbus.timedate] Load dbus interface org.freedesktop.timedate1 23-11-12 12:16:28 INFO (MainThread) [supervisor.host.services] Updating service information 23-11-12 12:16:28 INFO (MainThread) [supervisor.host.sound] Updating PulseAudio information 23-11-12 12:16:28 WARNING (SyncWorker_0) [supervisor.host.sound] Can't update PulseAudio data: Failed to connect to pulseaudio server 23-11-12 12:16:28 INFO (MainThread) [supervisor.host.network] Updating local network information 23-11-12 12:16:29 INFO (MainThread) [supervisor.host.apparmor] Loading AppArmor Profiles: {'hassio-supervisor'} 23-11-12 13:16:29 INFO (MainThread) [supervisor.docker.monitor] Started docker events monitor 23-11-12 13:16:29 INFO (MainThread) [supervisor.updater] Fetching update data from https://version.home-assistant.io/stable.json 23-11-12 13:16:29 INFO (MainThread) [supervisor.docker.interface] Found ghcr.io/home-assistant/armv7-hassio-cli versions: [<AwesomeVersion CalVer '2023.10.0'>] 23-11-12 13:16:29 INFO (MainThread) [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-cli with version 2023.10.0 23-11-12 13:16:29 INFO (MainThread) [supervisor.plugins.cli] Starting CLI plugin 23-11-12 13:16:33 INFO (MainThread) [supervisor.docker.cli] Starting CLI ghcr.io/home-assistant/armv7-hassio-cli with version 2023.10.0 - 172.30.32.5 23-11-12 13:16:33 INFO (MainThread) [supervisor.docker.interface] Found ghcr.io/home-assistant/armv7-hassio-dns versions: [<AwesomeVersion CalVer '2023.06.2'>] 23-11-12 13:16:33 INFO (MainThread) [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-dns with version 2023.06.2 23-11-12 13:16:33 INFO (MainThread) [supervisor.plugins.dns] Starting CoreDNS plugin 23-11-12 13:16:37 INFO (MainThread) [supervisor.docker.dns] Starting DNS ghcr.io/home-assistant/armv7-hassio-dns with version 2023.06.2 - 172.30.32.3 23-11-12 13:16:37 INFO (MainThread) [supervisor.plugins.dns] Updated /etc/resolv.conf 23-11-12 13:16:37 INFO (MainThread) [supervisor.docker.interface] Found ghcr.io/home-assistant/armv7-hassio-audio versions: [<AwesomeVersion CalVer '2023.10.0'>] 23-11-12 13:16:37 INFO (MainThread) [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-audio with version 2023.10.0 23-11-12 13:16:37 INFO (MainThread) [supervisor.plugins.audio] Starting Audio plugin 23-11-12 13:16:41 INFO (MainThread) [supervisor.docker.audio] Starting Audio ghcr.io/home-assistant/armv7-hassio-audio with version 2023.10.0 - 172.30.32.4 23-11-12 13:16:41 INFO (MainThread) [supervisor.docker.interface] Found ghcr.io/home-assistant/armv7-hassio-observer versions: [<AwesomeVersion CalVer '2023.06.0'>] 23-11-12 13:16:41 INFO (MainThread) [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-observer with version 2023.06.0 23-11-12 13:16:41 INFO (MainThread) [supervisor.plugins.observer] Starting observer plugin 23-11-12 13:16:46 INFO (MainThread) [supervisor.docker.observer] Starting Observer ghcr.io/home-assistant/armv7-hassio-observer with version 2023.06.0 - 172.30.32.6 23-11-12 13:16:46 INFO (MainThread) [supervisor.docker.interface] Found ghcr.io/home-assistant/armv7-hassio-multicast versions: [<AwesomeVersion CalVer '2023.06.2'>] 23-11-12 13:16:46 INFO (MainThread) [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-multicast with version 2023.06.2 23-11-12 13:16:46 INFO (MainThread) [supervisor.plugins.multicast] Starting Multicast plugin 23-11-12 13:16:49 INFO (MainThread) [supervisor.docker.multicast] Starting Multicast ghcr.io/home-assistant/armv7-hassio-multicast with version 2023.06.2 - Host 23-11-12 13:16:49 INFO (MainThread) [supervisor.homeassistant.secrets] Loaded 0 Home Assistant secrets 23-11-12 13:16:50 INFO (MainThread) [supervisor.docker.interface] No version found for ghcr.io/home-assistant/tinker-homeassistant 23-11-12 13:16:50 INFO (MainThread) [supervisor.homeassistant.core] No Home Assistant Docker image ghcr.io/home-assistant/tinker-homeassistant found. 23-11-12 13:16:50 INFO (MainThread) [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/tinker-homeassistant with version landingpage 23-11-12 13:16:50 INFO (MainThread) [supervisor.homeassistant.core] Using preinstalled landingpage 23-11-12 13:16:50 INFO (MainThread) [supervisor.homeassistant.core] Starting HomeAssistant landingpage 23-11-12 13:16:50 INFO (MainThread) [supervisor.homeassistant.module] Update pulse/client.config: /data/tmp/homeassistant_pulse 23-11-12 13:16:53 INFO (MainThread) [supervisor.docker.homeassistant] Starting Home Assistant ghcr.io/home-assistant/tinker-homeassistant with version landingpage 23-11-12 13:16:54 CRITICAL (MainThread) [supervisor.core] Fatal error happening on load Task <coroutine object OSManager.load at 0xa33c2d48>: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 13:16:54 INFO (MainThread) [supervisor.store.git] Cloning add-on https://github.com/esphome/home-assistant-addon repository 23-11-12 13:16:54 INFO (MainThread) [supervisor.store.git] Cloning add-on https://github.com/home-assistant/addons repository 23-11-12 13:16:54 INFO (MainThread) [supervisor.store.git] Cloning add-on https://github.com/hassio-addons/repository repository 23-11-12 13:16:59 WARNING (SyncWorker_1) [supervisor.addons.validate] Add-on config using incompatible map options, 'addon_config' and 'homeassistant_config' are ignored if 'config' is included. Please report this to the maintainer of Terminal & SSH 23-11-12 13:16:59 WARNING (SyncWorker_0) [supervisor.addons.validate] Add-on config using incompatible map options, 'addon_config' and 'homeassistant_config' are ignored if 'config' is included. Please report this to the maintainer of Advanced SSH & Web Terminal 23-11-12 13:16:59 WARNING (SyncWorker_0) [supervisor.addons.validate] Add-on config using incompatible map options, 'addon_config' and 'homeassistant_config' are ignored if 'config' is included. Please report this to the maintainer of Studio Code Server 23-11-12 13:17:00 INFO (MainThread) [supervisor.store] Loading add-ons from store: 71 all - 71 new - 0 remove 23-11-12 13:17:00 INFO (MainThread) [supervisor.addons] Found 0 installed add-ons 23-11-12 13:17:00 INFO (MainThread) [supervisor.backups.manager] Found 0 backup files 23-11-12 13:17:00 INFO (MainThread) [supervisor.discovery] Loaded 0 messages 23-11-12 13:17:00 INFO (MainThread) [supervisor.ingress] Loaded 0 ingress sessions 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.check] Starting system checks with state setup 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.check] System checks complete 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state setup 23-11-12 13:17:00 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing network_manager: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 13:17:00 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing systemd_journal: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 13:17:00 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing systemd: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 13:17:00 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing os_agent: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.evaluate] System evaluation complete 23-11-12 13:17:00 INFO (MainThread) [supervisor.jobs] 'ResolutionFixup.run_autofix' blocked from execution, system is not healthy - setup 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state setup 23-11-12 13:17:00 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing network_manager: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 13:17:00 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing systemd_journal: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 13:17:00 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing systemd: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 13:17:00 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing os_agent: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.evaluate] System evaluation complete 23-11-12 13:17:00 INFO (MainThread) [main] Running Supervisor 23-11-12 13:17:00 CRITICAL (MainThread) [supervisor.core] System is running in an unhealthy state and needs manual intervention! 23-11-12 13:17:00 INFO (MainThread) [supervisor.os.manager] Rauc: A - marked slot kernel.0 as good 23-11-12 13:17:00 INFO (MainThread) [supervisor.addons] Phase 'initialize' starting 0 add-ons 23-11-12 13:17:00 INFO (MainThread) [supervisor.addons] Phase 'system' starting 0 add-ons 23-11-12 13:17:00 INFO (MainThread) [supervisor.addons] Phase 'services' starting 0 add-ons 23-11-12 13:17:00 INFO (MainThread) [supervisor.core] Skipping start of Home Assistant 23-11-12 13:17:00 INFO (MainThread) [supervisor.addons] Phase 'application' starting 0 add-ons 23-11-12 13:17:00 INFO (MainThread) [supervisor.misc.tasks] All core tasks are scheduled 23-11-12 13:17:00 INFO (MainThread) [supervisor.core] Supervisor is up and running 23-11-12 13:17:00 INFO (MainThread) [supervisor.homeassistant.core] Home Assistant setup 23-11-12 13:17:00 INFO (MainThread) [supervisor.docker.interface] Updating image ghcr.io/home-assistant/tinker-homeassistant:landingpage to ghcr.io/home-assistant/tinker-homeassistant:2023.11.2 23-11-12 13:17:00 INFO (MainThread) [supervisor.docker.interface] Downloading docker image ghcr.io/home-assistant/tinker-homeassistant with tag 2023.11.2. 23-11-12 13:17:00 INFO (MainThread) [supervisor.host.info] Updating local host information 23-11-12 13:17:00 INFO (MainThread) [supervisor.updater] Fetching update data from https://version.home-assistant.io/stable.json 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.check] Starting system checks with state running 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.checks.base] Run check for dns_server_ipv6_error/dns_server 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.checks.base] Run check for ipv4_connection_problem/system 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.checks.base] Run check for docker_config/system 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.checks.base] Run check for no_current_backup/system 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.module] Create new suggestion create_full_backup - system / None 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.module] Create new issue no_current_backup - system / None 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.checks.base] Run check for multiple_data_disks/system 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.module] Create new suggestion rename_data_disk - system / /dev/mmcblk1p8 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.module] Create new issue multiple_data_disks - system / /dev/mmcblk1p8 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.checks.base] Run check for free_space/system 23-11-12 13:17:00 INFO (MainThread) [supervisor.resolution.checks.base] Run check for trust/supervisor 23-11-12 13:17:00 WARNING (MainThread) [supervisor.updater] Board 'ihost' not found in version file. No OS updates. 23-11-12 13:17:01 INFO (MainThread) [supervisor.resolution.checks.base] Run check for dns_server_failed/dns_server 23-11-12 13:17:01 INFO (MainThread) [supervisor.resolution.checks.base] Run check for pwned/addon 23-11-12 13:17:01 INFO (MainThread) [supervisor.resolution.checks.base] Run check for security/core 23-11-12 13:17:01 INFO (MainThread) [supervisor.resolution.check] System checks complete 23-11-12 13:17:01 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state running 23-11-12 13:17:01 ERROR (MainThread) [aiohttp.server] Error handling request Traceback (most recent call last): File "/usr/local/lib/python3.11/site-packages/aiohttp/web_protocol.py", line 433, in _handle_request resp = await request_handler(request) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/site-packages/aiohttp/web_app.py", line 504, in _handle resp = await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/site-packages/aiohttp/web_middlewares.py", line 117, in impl return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/api/middleware/security.py", line 185, in block_bad_requests return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/api/middleware/security.py", line 201, in system_validation return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/api/middleware/security.py", line 268, in token_validation return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/api/middleware/security.py", line 280, in core_proxy return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/api/utils.py", line 62, in wrap_api answer = await method(api, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/api/host.py", line 74, in info ATTR_FEATURES: self.sys_host.features, ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/host/manager.py", line 78, in features return self.supported_features() ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/supervisor/supervisor/host/manager.py", line 120, in supported_features or self.sys_os.version >= AwesomeVersion("10.2") ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/site-packages/awesomeversion/awesomeversion.py", line 205, in ge return self.eq(compareto) or self.gt(compareto) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/site-packages/awesomeversion/awesomeversion.py", line 192, in gt raise AwesomeVersionCompareException( awesomeversion.exceptions.AwesomeVersionCompareException: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 13:17:01 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing network_manager: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 13:17:03 INFO (MainThread) [supervisor.resolution.evaluate] System evaluation complete 23-11-12 13:17:03 INFO (MainThread) [supervisor.jobs] 'ResolutionFixup.run_autofix' blocked from execution, system is not healthy - setup 23-11-12 13:17:04 INFO (MainThread) [supervisor.host.services] Updating service information 23-11-12 13:17:04 INFO (MainThread) [supervisor.host.network] Updating local network information 23-11-12 13:17:05 INFO (MainThread) [supervisor.host.sound] Updating PulseAudio information 23-11-12 13:17:05 WARNING (SyncWorker_2) [supervisor.host.sound] Can't update PulseAudio data: Failed to connect to pulseaudio server 23-11-12 13:17:05 INFO (MainThread) [supervisor.host.manager] Host information reload completed s6-rc: info: service s6rc-oneshot-runner: starting s6-rc: info: service s6rc-oneshot-runner successfully started s6-rc: info: service fix-attrs: starting s6-rc: info: service fix-attrs successfully started s6-rc: info: service legacy-cont-init: starting cont-init: info: running /etc/cont-init.d/udev.sh [13:58:14] INFO: Using udev information from host cont-init: info: /etc/cont-init.d/udev.sh exited 0 s6-rc: info: service legacy-cont-init successfully started s6-rc: info: service legacy-services: starting services-up: info: copying legacy longrun supervisor (no readiness notification) services-up: info: copying legacy longrun watchdog (no readiness notification) s6-rc: info: service legacy-services successfully started [13:58:14] INFO: Starting local supervisor watchdog... 23-11-12 13:58:28 INFO (MainThread) [main] Initializing Supervisor setup 23-11-12 14:58:28 INFO (MainThread) [supervisor.bootstrap] Seting up coresys for machine: tinker 23-11-12 14:58:28 INFO (MainThread) [supervisor.docker.supervisor] Attaching to Supervisor ghcr.io/home-assistant/armv7-hassio-supervisor with version 2023.11.0 23-11-12 14:58:28 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state initialize 23-11-12 14:58:28 INFO (MainThread) [supervisor.resolution.evaluate] System evaluation complete 23-11-12 14:58:28 INFO (MainThread) [main] Setting up Supervisor 23-11-12 14:58:29 INFO (MainThread) [supervisor.api] Starting API on 172.30.32.2 23-11-12 14:58:29 INFO (MainThread) [supervisor.hardware.monitor] Started Supervisor hardware monitor 23-11-12 14:58:29 INFO (MainThread) [supervisor.dbus.manager] Connected to system D-Bus. 23-11-12 14:58:29 INFO (MainThread) [supervisor.dbus.agent] Load dbus interface io.hass.os 23-11-12 14:58:29 INFO (MainThread) [supervisor.dbus.hostname] Load dbus interface org.freedesktop.hostname1 23-11-12 14:58:29 INFO (MainThread) [supervisor.dbus.logind] Load dbus interface org.freedesktop.login1 23-11-12 14:58:29 INFO (MainThread) [supervisor.dbus.network] Load dbus interface org.freedesktop.NetworkManager 23-11-12 14:58:29 INFO (MainThread) [supervisor.dbus.rauc] Load dbus interface de.pengutronix.rauc 23-11-12 14:58:29 INFO (MainThread) [supervisor.dbus.resolved] Load dbus interface org.freedesktop.resolve1 23-11-12 14:58:29 INFO (MainThread) [supervisor.dbus.systemd] Load dbus interface org.freedesktop.systemd1 23-11-12 14:58:29 INFO (MainThread) [supervisor.dbus.timedate] Load dbus interface org.freedesktop.timedate1 23-11-12 14:58:31 INFO (MainThread) [supervisor.host.services] Updating service information 23-11-12 14:58:31 INFO (MainThread) [supervisor.host.sound] Updating PulseAudio information 23-11-12 14:58:31 WARNING (SyncWorker_0) [supervisor.host.sound] Can't update PulseAudio data: Failed to connect to pulseaudio server 23-11-12 14:58:32 INFO (MainThread) [supervisor.host.network] Updating local network information 23-11-12 14:58:32 INFO (MainThread) [supervisor.host.apparmor] Loading AppArmor Profiles: {'hassio-supervisor'} 23-11-12 14:58:32 INFO (MainThread) [supervisor.docker.monitor] Started docker events monitor 23-11-12 14:58:32 INFO (MainThread) [supervisor.updater] Fetching update data from https://version.home-assistant.io/stable.json 23-11-12 14:58:32 INFO (MainThread) [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-cli with version 2023.10.0 23-11-12 14:58:32 INFO (MainThread) [supervisor.plugins.cli] Starting CLI plugin 23-11-12 14:58:32 INFO (SyncWorker_1) [supervisor.docker.manager] Cleaning hassio_cli application 23-11-12 14:58:36 INFO (MainThread) [supervisor.docker.cli] Starting CLI ghcr.io/home-assistant/armv7-hassio-cli with version 2023.10.0 - 172.30.32.5 23-11-12 14:58:36 INFO (MainThread) [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-dns with version 2023.06.2 23-11-12 14:58:37 INFO (MainThread) [supervisor.plugins.dns] Starting CoreDNS plugin 23-11-12 14:58:37 INFO (SyncWorker_1) [supervisor.docker.manager] Cleaning hassio_dns application 23-11-12 14:58:41 INFO (MainThread) [supervisor.docker.dns] Starting DNS ghcr.io/home-assistant/armv7-hassio-dns with version 2023.06.2 - 172.30.32.3 23-11-12 14:58:41 INFO (MainThread) [supervisor.plugins.dns] Updated /etc/resolv.conf 23-11-12 14:58:41 INFO (MainThread) [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-audio with version 2023.10.0 23-11-12 14:58:41 INFO (MainThread) [supervisor.plugins.audio] Starting Audio plugin 23-11-12 14:58:41 INFO (SyncWorker_0) [supervisor.docker.manager] Cleaning hassio_audio application 23-11-12 14:58:44 INFO (MainThread) [supervisor.docker.audio] Starting Audio ghcr.io/home-assistant/armv7-hassio-audio with version 2023.10.0 - 172.30.32.4 23-11-12 14:58:45 INFO (MainThread) [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-observer with version 2023.06.0 23-11-12 14:58:45 INFO (MainThread) [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/armv7-hassio-multicast with version 2023.06.2 23-11-12 14:58:45 INFO (MainThread) [supervisor.plugins.multicast] Starting Multicast plugin 23-11-12 14:58:45 INFO (SyncWorker_1) [supervisor.docker.manager] Cleaning hassio_multicast application 23-11-12 15:00:21 ERROR (SyncWorker_0) [supervisor.docker.manager] Can't create container from hassio_multicast: 409 Client Error for http+docker://localhost/v1.43/containers/create?name=hassio_multicast: Conflict ("Conflict. The container name "/hassio_multicast" is already in use by container "669ab4667d79adc6ec2326bdb8452723e808f41c93e9448bf18d34e46e143edc". You have to remove (or rename) that container to be able to reuse that name.") 23-11-12 15:00:21 ERROR (MainThread) [supervisor.plugins.multicast] Can't start Multicast plugin 23-11-12 15:00:21 INFO (MainThread) [supervisor.homeassistant.secrets] Loaded 0 Home Assistant secrets 23-11-12 15:00:21 INFO (MainThread) [supervisor.docker.interface] Attaching to ghcr.io/home-assistant/tinker-homeassistant with version landingpage 23-11-12 15:00:21 INFO (MainThread) [supervisor.homeassistant.core] Starting HomeAssistant landingpage 23-11-12 15:00:21 INFO (SyncWorker_0) [supervisor.docker.manager] Starting homeassistant 23-11-12 15:00:24 CRITICAL (MainThread) [supervisor.core] Fatal error happening on load Task <coroutine object OSManager.load at 0xa33c4988>: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 15:00:26 WARNING (SyncWorker_0) [supervisor.addons.validate] Add-on config using incompatible map options, 'addon_config' and 'homeassistant_config' are ignored if 'config' is included. Please report this to the maintainer of Terminal & SSH 23-11-12 15:00:27 WARNING (SyncWorker_1) [supervisor.addons.validate] Add-on config using incompatible map options, 'addon_config' and 'homeassistant_config' are ignored if 'config' is included. Please report this to the maintainer of Advanced SSH & Web Terminal 23-11-12 15:00:27 WARNING (SyncWorker_1) [supervisor.addons.validate] Add-on config using incompatible map options, 'addon_config' and 'homeassistant_config' are ignored if 'config' is included. Please report this to the maintainer of Studio Code Server 23-11-12 15:00:28 INFO (MainThread) [supervisor.store.git] Loading add-on /data/addons/core repository 23-11-12 15:00:28 INFO (MainThread) [supervisor.store.git] Loading add-on /data/addons/git/a0d7b954 repository 23-11-12 15:00:28 INFO (MainThread) [supervisor.store.git] Loading add-on /data/addons/git/5c53de3b repository 23-11-12 15:00:30 WARNING (SyncWorker_2) [supervisor.addons.validate] Add-on config using incompatible map options, 'addon_config' and 'homeassistant_config' are ignored if 'config' is included. Please report this to the maintainer of Terminal & SSH 23-11-12 15:00:31 WARNING (SyncWorker_3) [supervisor.addons.validate] Add-on config using incompatible map options, 'addon_config' and 'homeassistant_config' are ignored if 'config' is included. Please report this to the maintainer of Advanced SSH & Web Terminal 23-11-12 15:00:31 WARNING (SyncWorker_3) [supervisor.addons.validate] Add-on config using incompatible map options, 'addon_config' and 'homeassistant_config' are ignored if 'config' is included. Please report this to the maintainer of Studio Code Server 23-11-12 15:00:32 INFO (MainThread) [supervisor.store] Loading add-ons from store: 71 all - 71 new - 0 remove 23-11-12 15:00:32 INFO (MainThread) [supervisor.addons] Found 0 installed add-ons 23-11-12 15:00:32 INFO (MainThread) [supervisor.backups.manager] Found 0 backup files 23-11-12 15:00:32 INFO (MainThread) [supervisor.discovery] Loaded 0 messages 23-11-12 15:00:32 INFO (MainThread) [supervisor.ingress] Loaded 0 ingress sessions 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.check] Starting system checks with state setup 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.check] System checks complete 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state setup 23-11-12 15:00:32 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing network_manager: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 15:00:32 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing systemd_journal: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 15:00:32 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing systemd: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 15:00:32 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing os_agent: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.evaluate] System evaluation complete 23-11-12 15:00:32 INFO (MainThread) [supervisor.jobs] 'ResolutionFixup.run_autofix' blocked from execution, system is not healthy - setup 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state setup 23-11-12 15:00:32 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing network_manager: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 15:00:32 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing systemd_journal: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 15:00:32 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing systemd: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 15:00:32 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing os_agent: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.evaluate] System evaluation complete 23-11-12 15:00:32 INFO (MainThread) [main] Running Supervisor 23-11-12 15:00:32 CRITICAL (MainThread) [supervisor.core] System is running in an unhealthy state and needs manual intervention! 23-11-12 15:00:32 INFO (MainThread) [supervisor.os.manager] Rauc: A - marked slot kernel.0 as good 23-11-12 15:00:32 INFO (MainThread) [supervisor.addons] Phase 'initialize' starting 0 add-ons 23-11-12 15:00:32 INFO (MainThread) [supervisor.addons] Phase 'system' starting 0 add-ons 23-11-12 15:00:32 INFO (MainThread) [supervisor.addons] Phase 'services' starting 0 add-ons 23-11-12 15:00:32 INFO (MainThread) [supervisor.core] Skipping start of Home Assistant 23-11-12 15:00:32 INFO (MainThread) [supervisor.addons] Phase 'application' starting 0 add-ons 23-11-12 15:00:32 INFO (MainThread) [supervisor.misc.tasks] All core tasks are scheduled 23-11-12 15:00:32 INFO (MainThread) [supervisor.core] Supervisor is up and running 23-11-12 15:00:32 INFO (MainThread) [supervisor.homeassistant.core] Home Assistant setup 23-11-12 15:00:32 INFO (MainThread) [supervisor.docker.interface] Updating image ghcr.io/home-assistant/tinker-homeassistant:landingpage to ghcr.io/home-assistant/tinker-homeassistant:2023.11.2 23-11-12 15:00:32 INFO (MainThread) [supervisor.docker.interface] Downloading docker image ghcr.io/home-assistant/tinker-homeassistant with tag 2023.11.2. 23-11-12 15:00:32 INFO (MainThread) [supervisor.host.info] Updating local host information 23-11-12 15:00:32 INFO (MainThread) [supervisor.updater] Fetching update data from https://version.home-assistant.io/stable.json 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.check] Starting system checks with state running 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.checks.base] Run check for dns_server_ipv6_error/dns_server 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.checks.base] Run check for ipv4_connection_problem/system 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.checks.base] Run check for docker_config/system 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.checks.base] Run check for no_current_backup/system 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.module] Create new suggestion create_full_backup - system / None 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.module] Create new issue no_current_backup - system / None 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.checks.base] Run check for multiple_data_disks/system 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.module] Create new suggestion rename_data_disk - system / /dev/mmcblk1p8 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.module] Create new issue multiple_data_disks - system / /dev/mmcblk1p8 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.checks.base] Run check for free_space/system 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.checks.base] Run check for trust/supervisor 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.checks.base] Run check for dns_server_failed/dns_server 23-11-12 15:00:32 WARNING (MainThread) [supervisor.updater] Board 'ihost' not found in version file. No OS updates. 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.checks.base] Run check for pwned/addon 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.checks.base] Run check for security/core 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.check] System checks complete 23-11-12 15:00:32 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state running 23-11-12 15:00:33 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing network_manager: Can't compare <unknown 11.1.rc1.9> and <CalVer 10.2> 23-11-12 15:00:34 INFO (MainThread) [supervisor.resolution.evaluate] System evaluation complete 23-11-12 15:00:34 INFO (MainThread) [supervisor.jobs] 'ResolutionFixup.run_autofix' blocked from execution, system is not healthy - setup 23-11-12 15:00:37 INFO (MainThread) [supervisor.host.services] Updating service information 23-11-12 15:00:37 INFO (MainThread) [supervisor.host.network] Updating local network information 23-11-12 15:00:38 INFO (MainThread) [supervisor.host.sound] Updating PulseAudio information 23-11-12 15:00:38 INFO (MainThread) [supervisor.host.manager] Host information reload completed
darkxst
commented
12 months ago Yes. Boot it's work. Hassio onboarding page error
you just need to wait a bit longer, will come good after downloads are completed.
write this image in boot version for emmc?
I will create a new boot.img when I release 11.1rc2 soon
riddik14
commented
12 months ago So in the meantime I thank you for the time you dedicated to me. then I noticed that there were errors on the first login. I managed to create a user by reloading the page. supervisor didn't give me addons. when ihost is restarted it no longer starts, only http://homeassistant.local:4357/ works
| Supervisor: | Connected |
|---|---|
| Supported: | Supported |
| Healthy: | Healthy |
in my opinion supervisor, or docker has some problems. could it be that something needs to be changed regarding docker? when I do docker ps from terminal it crashes. I have to exit with ctrl+x.
darkxst
commented
12 months ago The errors on the landing page are somewhat normal, I dont know what causes them, but they do go away once its ready. Addons take a while to come up on first boot also.
No changes are required in docker, but the performance of the 2GB version (only 2 cores, instead of 4) might be an issue. I suppose it might take 5mins or so for the login to be ready again after reboot.
darkxst
commented
12 months ago when I do docker ps from terminal it crashes.
I dont know what would cause this, I have never seen that happen on the 4GB model
riddik14
commented
12 months ago then I created sdcard, it starts, after 15-20 minutes despite the errors, updating the page starts it up. menu 8123/hassio/dashboard does not load addons
1 /dev/mmcblk1p8 is a filesystem with the name hassos-data and is not the active data disk. This can cause Home Assistant to choose the wrong data disk when the system restarts.
2 The system is currently unhealthy because the installation was not completed. There are a number of reasons why this can occur, use the link to find out more and how to fix it.
Use the fix option to rename the filesystem to prevent this from happening. Alternatively, you can move the data disk to the drive (overwriting its contents) or remove the drive from the system.
tried rebooting host setting not available from web menu
ip:4357 result Home Assistant observer Supervisor: Connected Supported: Supported Healthy: Unhealthy setup
Lastly. reboot from the console with the ha host reboot command ihost restarts but no longer loads docker, error in the containerd.service service
audio_2023-11-13T18-38-01.645Z.log supervisor_2023-11-13T18-37-42.567Z.log home-assistant_2023-11-13T18-37-34.123Z.log host_2023-11-13T18-37-19.848Z.log logs (2).txt
riddik14
commented
12 months ago after ha su reload
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File “/usr/local/lib/python3.11/site-packages/aiohttp/web_app.py”, line 504, in _handle resp = await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/local/lib/python3.11/site-packages/aiohttp/web_middlewares.py”, line 117, in impl return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/api/middleware/security.py”, line 185, in block_bad_requests return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/api/middleware/security.py”, line 201, in system_validation return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/api/middleware/security.py”, line 268, in token_validation return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/api/middleware/security.py”, line 280, in core_proxy return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/api/utils.py”, line 62, in wrap_api answer = await method(api, *args, *kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/api/host.py”, line 74, in info ATTR_FEATURES: self.sys_host.features, ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/host/manager.py”, line 78, in features return self.supported_features() ^^^^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/host/manager.py”, line 120, in supported_features or self.sys_os.version >= AwesomeVersion(“10.2”) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File “/usr/local/lib/python3.11/site-packages/awesomeversion/awesomeversion.py”, line 205, in ge return self.eq(compareto) or self.gt(compareto) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/local/lib/python3.11/site-packages/awesomeversion/awesomeversion.py”, line 192, in gt raise AwesomeVersionCompareException( awesomeversion.exceptions.AwesomeVersionCompareException: Can’t compare <unknown 11.1.rc1.9> and <CalVer 10.2> [32m23-11-13 19:45:38 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state running[0m [33m23-11-13 19:45:38 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing network_manager: Can’t compare <unknown 11.1.rc1.9> and <CalVer 10.2>supervisor.resolution.evaluate [supervisor.resolution.evaluate] System evaluation complete[0m [32m23-11-13 19:45:39 INFO (MainThread) [supervisor.updater] Fetching update data from https://version.home-assistant.io/stable.json[0m [32m23-11-13 19:45:39 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state running[0m [33m23-11-13 19:45:39 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing network_manager: Can’t compare <unknown 11.1.rc1.9> and <CalVer 10.2>[0m [33m23-11-13 19:45:39 WARNING (MainThread) [supervisor.updater] Board ‘ihost’ not found in version file. No OS updates.supervisor.resolution.evaluate [supervisor.resolution.evaluate] System evaluation complete[0m [32m23-11-13 19:45:47 INFO (MainThread) [supervisor.store.git] Update add-on https://github.com/esphome/home-assistant-addon repository[0m [32m23-11-13 19:45:47 INFO (MainThread) [supervisor.store.git] Update add-on https://github.com/hassio-addons/repository repository[0m [32m23-11-13 19:45:47 INFO (MainThread) [supervisor.store.git] Update add-on https://github.com/home-assistant/addons repository[0m [33m23-11-13 19:45:51 WARNING (SyncWorker_0) [supervisor.addons.validate] Add-on config using incompatible map options, ‘addon_config’ and ‘homeassistant_config’ are ignored if ‘config’ is included. Please report this to the maintainer of Terminal & SSH[0m [33m23-11-13 19:45:51 WARNING (SyncWorker_4) [supervisor.addons.validate] Add-on config using incompatible map options, ‘addon_config’ and ‘homeassistant_config’ are ignored if ‘config’ is included. Please report this to the maintainer of Advanced SSH & Web Terminal[0m [33m23-11-13 19:45:51 WARNING (SyncWorker_4) [supervisor.addons.validate] Add-on config using incompatible map options, ‘addon_config’ and ‘homeassistant_config’ are ignored if ‘config’ is included. Please report this to the maintainer of Studio Code Server[0m [33m23-11-13 19:45:52 WARNING (SyncWorker_5) [supervisor.addons.validate] Add-on config using incompatible map options, ‘addon_config’ and ‘homeassistant_config’ are ignored if ‘config’ is included. Please report this to the maintainer of Terminal & SSH[0m [33m23-11-13 19:45:52 WARNING (SyncWorker_4) [supervisor.addons.validate] Add-on config using incompatible map options, ‘addon_config’ and ‘homeassistant_config’ are ignored if ‘config’ is included. Please report this to the maintainer of Advanced SSH & Web Terminal[0m [33m23-11-13 19:45:52 WARNING (SyncWorker_4) [supervisor.addons.validate] Add-on config using incompatible map options, ‘addon_config’ and ‘homeassistant_config’ are ignored if ‘config’ is included. Please report this to the maintainer of Studio Code Server[0m [32m23-11-13 19:45:53 INFO (MainThread) [supervisor.store] Loading add-ons from store: 71 all - 0 new - 0 remove[0m [32m23-11-13 19:45:53 INFO (MainThread) [supervisor.store] Loading add-ons from store: 71 all - 0 new - 0 remove[0m [31m23-11-13 19:45:53 ERROR (MainThread) [aiohttp.server] Error handling request[0m Traceback (most recent call last): File “/usr/local/lib/python3.11/site-packages/aiohttp/web_protocol.py”, line 433, in _handle_request resp = await request_handler(request) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File “/usr/local/lib/python3.11/site-packages/aiohttp/web_app.py”, line 504, in _handle resp = await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/local/lib/python3.11/site-packages/aiohttp/web_middlewares.py”, line 117, in impl return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/api/middleware/security.py”, line 185, in block_bad_requests return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/api/middleware/security.py”, line 201, in system_validation return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/api/middleware/security.py”, line 268, in token_validation return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/api/middleware/security.py”, line 280, in core_proxy return await handler(request) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/api/utils.py”, line 62, in wrap_api answer = await method(api, args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/api/root.py”, line 48, in info ATTR_FEATURES: self.sys_host.features, ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/host/manager.py”, line 78, in features return self.supported_features() ^^^^^^^^^^^^^^^^^^^^^^^^^ File “/usr/src/supervisor/supervisor/host/manager.py”, line 120, in supported_features or self.sys_os.version >= AwesomeVersion(“10.2”) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File “/usr/local/lib/python3.11/site-packages/awesomeversion/awesomeversion.py”, line 205, in ge return self.eq(compareto) or self.gt(compareto) ^^^^^^^^^^^^^^^^^^^^^^ File “/usr/local/lib/python3.11/site-packages/awesomeversion/awesomeversion.py”, line 192, in gt raise AwesomeVersionCompareException( awesomeversion.exceptions.AwesomeVersionCompareException: Can’t compare <unknown 11.1.rc1.9> and <CalVer 10.2> [32m23-11-13 19:45:59 INFO (MainThread) [supervisor.resolution.evaluate] Starting system evaluation with state running[0m [33m23-11-13 19:45:59 WARNING (MainThread) [supervisor.resolution.evaluate] Error during processing network_manager: Can’t compare <unknown 11.1.rc1.9> and <CalVer 10.2>supervisor.resolution.evaluate [supervisor.resolution.evaluate] System evaluation complete[0m
system in first start after first install.
riddik14
commented
12 months ago Settings -> System -> Storage not work, probably error from supervisor.
i wait for test emmc image. probably sd card error
darkxst
commented
12 months ago awesomeversion.exceptions.AwesomeVersionCompareException: Can’t compare <unknown 11.1.rc1.9> and <CalVer 10.2>
It seems to not like the version number I gave to that image. I dunno if these errors are really critical though or can be ignored.
/dev/mmcblk1p8 is a filesystem with the name hassos-data and is not the active data disk. This can cause Home Assistant to choose the wrong data disk when the system restarts.
Did you wipe the eMMC after your earlier attempts? things wont play nice booting off SD card, if there is also a data partition on the eMMC.
riddik14
commented
12 months ago Emmc is in short with jumper on maskrom pin
darkxst
commented
12 months ago I am preparing rc2 now, lets hope the version number is causing the issues!
darkxst
commented
12 months ago
Describe the issue you are experiencing
boot.img.xz - installer not start, serial over usb yes haos_ihost-11.1.img.xz - on sd card not start
there is a command for start istaller? i have use balena etcher for create sdcard
What operating system image do you use?
generic-x86-64 (Generic UEFI capable x86-64 systems)
What version of Home Assistant Operating System is installed?
last
Did you upgrade the Operating System.
No
Steps to reproduce the issue
-
Anything in the Supervisor logs that might be useful for us?
Anything in the Host logs that might be useful for us?
System information
No response
Additional information
-