search

darkxst / silabs-firmware-builder

Silicon Labs firmware builder
https://darkxst.github.io/silabs-firmware-builder/
263 stars 25 forks source link

ZB-GW04 #24

Closed RichardPar closed 7 months ago

RichardPar commented 7 months ago

Hi There,

I have a generic ZB-GW02 v1.2 dongle - flashing the firmware for this device results in 'Secondary is Unresonsive' errors. I go back to my own generic software and it runs.

Is there perhaps more varieties ?

Thanks Richard

darkxst commented 7 months ago

Which firmware are you using and how did you install it? You probably need to make sure you have the correct baudrate, which should be 230400 for the RCP or Openthread firmwares.

RichardPar commented 7 months ago

Which firmware are you using and how did you install it? You probably need to make sure you have the correct baudrate, which should be 230400 for the RCP or Openthread firmwares.

Sorry, Ignore me, its was a sheer moment of stupidity.. I had the baud rate too high (the HA Sky Connect pages)

RichardPar commented 7 months ago

Closed