search

daromer2 / InverterOfThings

ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters
GNU Lesser General Public License v3.0
26 stars 11 forks source link

Not reading data from RJ45 port #4

Closed ian-tait closed 3 years ago

ian-tait commented 3 years ago

Hi,

I have been testing your serial connection on my inverter HYV4K4000-48, but seem to be having limited luck. When using the MPI setting I can see the MQTT reports 0's on all topics. However, if I use any other type like PIP and PCM, there are no topics being broadcast. Is this correct?

I wonder if I have the wrong pinout on my full-size adapter (rs232-TTL) (i.e. the adapter I'm using have the serial connector on the board. I have the mini ones on order.) My wiring is as shown in the image bottom right within GitHub.

If you have any suggestions I would love to hear them.

Thank you Ian

ian-tait commented 3 years ago

So I seem to be getting ^0⧠ã on the _commandBuffer. Not really sure why this would be the case. It happens on all device types, which makes me think it is a reading issue within the code.

Any pointer would e really helpful about now. :)

Ian

softwarecrash commented 3 years ago

hey, the PIP/PCM seems not implementet fully on this fork. i do a rework on another fork, but this supports only the qpigs command, not sure that your inverter replay to this. but you can try it

daromer2 commented 3 years ago

PIP have now been implemented in this fork and support both PCM and PIP series.