search

darthcloud / BlueRetro

Multiplayer Bluetooth controllers adapter for retro video game consoles
https://blueretro.io
Apache License 2.0
1.23k stars 104 forks source link

Exclene gamecube controller instant disconnect v1.8.4 #759

Closed DragonKumera closed 8 months ago

DragonKumera commented 10 months ago

BlueRetro firmware version

1.8.4

BlueRetro firmware specification

HW2

BlueRetro firmware variant

System specific

BlueRetro hardware type

Internal install modkit

Manufacturer

Lazer Bear

System used

Nintendo GameCube

Bluetooth controller brand & name

Excelene Gamecube controller

What is problem? (only list ONE problem per report)

Controllers constantly disconnecting after not even a minute. (exclene gamecube controller) 4 of them. Had to flash back to 1.8.3 for now as I tried all sorts of fixes or troubleshooting and nothing worked. Bright side rumble worked but I truly hope this gets fixed soon.

What did you expect to happen?

Not disconnect

Attach files like logs or Bluetooth traces here

No response

darthcloud commented 10 months ago

Did you pair controller in Y + Home mode? https://github.com/darthcloud/BlueRetro/wiki/Controller-pairing-guide#12---exlene-gamecube-paring-guide

DragonKumera commented 10 months ago

Yes and same problem.

darthcloud commented 9 months ago

Tried with my own Exlene in v1.8.4 and it totally work fine for me in IOS/Xinput mode (Y + Home). Played 15min with no issue.

The fact you say rumble work tells me you are not connected in the right mode.

Also you may want to try latest v1.9 beta: https://github.com/darthcloud/BlueRetro/actions/runs/6437347093

DragonKumera commented 9 months ago

Tried with my own Exlene in v1.8.4 and it totally work fine for me in IOS/Xinput mode (Y + Home). Played 15min with no issue.

The fact you say rumble work tells me you are not connected in the right mode.

Also you may want to try latest v1.9 beta: https://github.com/darthcloud/BlueRetro/actions/runs/6437347093

I tested both the home + y pairing mode (that has no rumble) and just the home pairing mode that has rumble. It works fine if in use I believe on 1 controller. But when 4 are connected and left idle for a minute or less it loses connection.

I will try this beta version you suggested and see how it goes. Not sure if I will get to it this weekend but will try. I can also record a video if you want if the issue persists.

I know 1.8.3 has been working solid for me on both just pressing home to pair and home + y. But will report back once I do testing when I have a chance.

DragonKumera commented 9 months ago

Tried with my own Exlene in v1.8.4 and it totally work fine for me in IOS/Xinput mode (Y + Home). Played 15min with no issue.

The fact you say rumble work tells me you are not connected in the right mode.

Also you may want to try latest v1.9 beta: https://github.com/darthcloud/BlueRetro/actions/runs/6437347093

Flashed the beta you linked and my controller disconnects were fixed! Now I am back to solid! The only issue now is the l+r button kinda half works? Its like it works but then sometimes doesnt or depending on the game doesnt at all. (mario party 7 it worked perfectly fine in). Well the L shoulder button. The R I had to kinda press harder? or press multiple times. Tested multiple controllers. Sad I no longer have rumble but at least it works now! home + y was used for the test and then home out of curiosity.

darthcloud commented 8 months ago

Fixed in v1.9 https://github.com/darthcloud/BlueRetro/releases/tag/v1.9