Closed MastaG closed 8 months ago
Well it seems to work for Ready 2 Rumble Round 2, but it doesn't work in Soul Calibur. Very strange.
As noted in the doc DC rumble is experimental.
So don't expect too much. https://github.com/darthcloud/BlueRetro/wiki/BlueRetro-System-Specific-User-Manual#accessories-15
Work to improve this is track by Issue #5
BlueRetro firmware version
1.9
BlueRetro firmware specification
HW1
BlueRetro firmware variant
System specific
BlueRetro hardware type
External adapter with multiple hardwired cord
Manufacturer
Retroscaler or Darthcloud?
System used
SEGA Dreamcast
Bluetooth controller brand & name
8Bitdo Pro2 as P1 and 8Bitdo SN30 Pro+ as P2
What is problem? (only list ONE problem per report)
Hi, I've followed the instructions here https://github.com/darthcloud/BlueRetro/wiki/Flashing-firmware-Windows-10 To flash the bootloader, partition table and BlueRetro_dreamcast.bin to my BlueRetro device for Dreamcast. I've used the HW1 version as the HW2 didn't boot. So I've paired my 8Bitdo Pro2 as P1 and SN30 Pro+ as P2. Then I proceeded to configure the device using the https://blueretro.io/ webpage. I've set output1 to "both" (Rumble + VMU) And output2, 3 and 4 to "rumble".
What did you expect to happen?
The VMU works fine, I can format it and save my games to it. However Rumble only seems to work for P1 (the 8Bitdo Pro2). P2 works, but doesn't receive the rumble signal.
Attach files like logs or Bluetooth traces here
No response