search

dartraiden / NVIDIA-patcher

Adds 3D acceleration support for P106-090 / P106-100 / P104-100 / P104-101 / P102-100 / CMP 30HX / CMP 40HX / CMP 50HX / CMP 70HX / CMP 90HX / CMP 170HX mining cards as well as RTX 3060 3840SP and RTX 3080 Ti 20GB.
300 stars 29 forks source link

Linux? #3

Open shpinog opened 1 year ago

shpinog commented 1 year ago

Is it possible to?

dartraiden commented 1 year ago

The Linux driver does not have these restrictions. I tested with P106-100, just install the proprietary driver and it just works.

shpinog commented 1 year ago

So it was up to version 515 of the driver. Now it looks like nvidia has done the same on linux as subsequent drivers have performance drops of up to ~5 fps

https://forums.developer.nvidia.com/t/performance-regression-on-prime-system-with-520-and-later-driver-series/241178

furioussv commented 1 year ago

for linux would be helpful these drivers to apply low memory frequency (810), instead of 3000/5000mhz for GDDR5X/6 mb it will be enough just with renaming (by deviceid?) from P-1/CMP-HX to GTX/RTX cards

PPTG commented 1 month ago

I'm bringing up the topic again: how can I enable full GPU support on Debian?

PPTG commented 1 month ago

GPU

I think the problem lies in the fact that the GPU is limited to a Gen 1 X4 communication bus. The clocks are correct, at least according to the readings. Where should I start tinkering in Linux to try to modify the driver so that it thinks it has a 1060?

PPTG commented 1 month ago

GPU2