search

darwinbeing / HPServerPSUHack

HP HSTNS-PL11/PL30/PL42 Server PSU Modification for Vehicle Flashing and Programming
MIT License
40 stars 13 forks source link

HP HSTNS-PL30 #3

Closed xrayos closed 1 year ago

xrayos commented 1 year ago

do you have a high resolution image of the soldering points for the resistor to increase the voltage? also, which resistor did you use in your final product that you use for coding the bmw. I'm trying to do the same thing. thanks!

darwinbeing commented 1 year ago

HERE IS MY PL30 OUTPUT 14.4V FOR BMW CODING SETUP

OUTPUT: 1.27K(TO GROUND) OVP: PATCH FIRMWARE OR 4.7K(TO GROUND) PL30 OUTPUT AND OVP MOD

xrayos commented 1 year ago

thank you! I'm going to try and patch firmware for OVP

Which are you using for ground to change the output to 14.4v?

IMG_6943

darwinbeing commented 1 year ago

The markings in the diagram indeed represent a ground connection, same as mine.

xrayos commented 1 year ago

Thanks!

what about the 2 potentiometers at the top of the board? can they be use to change the voltage?

darwinbeing commented 1 year ago

Using a potentiometer would make it more convenient to adjust the output.

xrayos commented 1 year ago

what about these two by the arrows? Can they be used to adjust the voltage? Thanks!

IMG_6943

darwinbeing commented 1 year ago

No, they can't, they might be related to OCP.