Closed mgoh99 closed 1 year ago
Well, i think is only need to try it
Good luck
I'm using with a lightbar, its basically the same thing, light bar just has an enclosure around the light strip, as long as it works with duoCo Strip or duoCo StripX app it will work with this integration
Code supports controlling lights in HA with write uuid: 0000fff3-0000-1000-8000-00805f9b34fb
You can know your uuid with gatttool:
gatttool -I
[be:59:7a:00:08:xx][LE]> connect be:59:7a:00:08:xx
Attempting to connect to be:59:7a:00:08:xx
Connection successful
[be:59:7a:00:08:xx][LE]> primary
attr handle: 0x0001, end grp handle: 0x0003 uuid: 00001800-0000-1000-8000-00805f9b34fb
attr handle: 0x0004, end grp handle: 0x0009 uuid: 0000fff0-0000-1000-8000-00805f9b34fb
[be:59:7a:00:08:xx][LE]> Characteristics
handle: 0x0002, char properties: 0x12, char value handle: 0x0003, uuid: 00002a00-0000-1000-8000-00805f9b34fb
handle: 0x0005, char properties: 0x10, char value handle: 0x0006, uuid: 0000fff4-0000-1000-8000-00805f9b34fb
handle: 0x0008, char properties: 0x06, char value handle: 0x0009, uuid: 0000fff3-0000-1000-8000-00805f9b34fb
in Characteristics you must have one uuid: 0000fff3-0000-1000-8000-00805f9b34fb
@ynsgnr can you post me your lightbar model or amazon link ?
thnks a lot
i found a similar link in amazon spain
Hi there - reading through the instructions, it seems like this integration only supports LED light strips. Is it possible to use with lightbars as well?