Bledom device not working

[Majikmonke]

Hi

I am unable to add 2 devices to this integration. I can connect to both through phone app Lotus Lantern and can see MAC codes but get an error when trying to connect stating unable to connect to Elkbledom

[hbkhalil]

I have the same issue

[dave-code-ruiz]

Ok, first you need to know that bluetooth only support one client connected to strip, you need to disconnect your strip from your app first to connect it with HA in your pic there are a button (like a chain) right to the ELKBLE strip click it to connect/disconnect strip.

Now you can enable debug mode: https://github.com/dave-code-ruiz/elkbledom?tab=readme-ov-file#enable-debug-mode

And you can send me debug logs to know exact error you receive.

thanks

[hbkhalil]

Ok I tried to unlink it but I still get the same issue. I tried to get the debug mode, but I don't think it is working. I think there is an issue with my Bluetooth adapter. This what I am getting

---

From: Dave Code @.> Sent: 26 February 2024 07:55 To: dave-code-ruiz/elkbledom @.> Cc: hbkhalil @.>; Comment @.> Subject: Re: [dave-code-ruiz/elkbledom] Bledom device not working (Issue #62)

Ok, first you need to know that bluetooth only support one client connected to strip, you need to disconnect your strip from your app first to connect it with HA in your pic there are a button (like a chain) right to the ELKBLE strip click it to connect/disconnect strip.

Now you can enable debug mode: https://github.com/dave-code-ruiz/elkbledom?tab=readme-ov-file#enable-debug-mode

And you can send me debug logs to know exact error you receive.

thanks

— Reply to this email directly, view it on GitHubhttps://github.com/dave-code-ruiz/elkbledom/issues/62#issuecomment-1963509919, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADAS4O27LRQZNKVDIGBBYODYVQ5VXAVCNFSM6AAAAABDCC5DCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRTGUYDSOJRHE. You are receiving this because you commented.Message ID: @.***>

[hbkhalil]

Logger: bluetooth_auto_recovery.recover Source: config_entries.py:444 First occurred: 12:37:54 (55 occurrences) Last logged: 13:15:15

• Could not determine the power state of the Bluetooth adapter hci0 [00:00:00:00:00:00] due to timeout after 5 seconds
• Bluetooth adapter hci0 [00:00:00:00:00:00] could not be reset:

---

From: Ibrahim Harrane @.> Sent: 26 February 2024 13:16 To: dave-code-ruiz/elkbledom @.> Subject: Re: [dave-code-ruiz/elkbledom] Bledom device not working (Issue #62)

Ok I tried to unlink it but I still get the same issue. I tried to get the debug mode, but I don't think it is working. I think there is an issue with my Bluetooth adapter. This what I am getting

---

From: Dave Code @.> Sent: 26 February 2024 07:55 To: dave-code-ruiz/elkbledom @.> Cc: hbkhalil @.>; Comment @.> Subject: Re: [dave-code-ruiz/elkbledom] Bledom device not working (Issue #62)

Ok, first you need to know that bluetooth only support one client connected to strip, you need to disconnect your strip from your app first to connect it with HA in your pic there are a button (like a chain) right to the ELKBLE strip click it to connect/disconnect strip.

Now you can enable debug mode: https://github.com/dave-code-ruiz/elkbledom?tab=readme-ov-file#enable-debug-mode

And you can send me debug logs to know exact error you receive.

thanks

— Reply to this email directly, view it on GitHubhttps://github.com/dave-code-ruiz/elkbledom/issues/62#issuecomment-1963509919, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADAS4O27LRQZNKVDIGBBYODYVQ5VXAVCNFSM6AAAAABDCC5DCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRTGUYDSOJRHE. You are receiving this because you commented.Message ID: @.***>

[Majikmonke]

Hi

Still unable to connect with link broken

Can get past the connection screen to enable debugging.

Kind regards

Dan Scate

Sent from my Samsung Galaxy smartphone.

-------- Original message -------- From: hbkhalil @.> Date: 26/02/2024 13:17 (GMT+00:00) To: dave-code-ruiz/elkbledom @.> Cc: Majikmonke @.>, Author @.> Subject: Re: [dave-code-ruiz/elkbledom] Bledom device not working (Issue #62)

Logger: bluetooth_auto_recovery.recover Source: config_entries.py:444 First occurred: 12:37:54 (55 occurrences) Last logged: 13:15:15

• Could not determine the power state of the Bluetooth adapter hci0 [00:00:00:00:00:00] due to timeout after 5 seconds
• Bluetooth adapter hci0 [00:00:00:00:00:00] could not be reset:

---

From: Ibrahim Harrane @.> Sent: 26 February 2024 13:16 To: dave-code-ruiz/elkbledom @.> Subject: Re: [dave-code-ruiz/elkbledom] Bledom device not working (Issue #62)

Ok I tried to unlink it but I still get the same issue. I tried to get the debug mode, but I don't think it is working. I think there is an issue with my Bluetooth adapter. This what I am getting

---

From: Dave Code @.> Sent: 26 February 2024 07:55 To: dave-code-ruiz/elkbledom @.> Cc: hbkhalil @.>; Comment @.> Subject: Re: [dave-code-ruiz/elkbledom] Bledom device not working (Issue #62)

Ok, first you need to know that bluetooth only support one client connected to strip, you need to disconnect your strip from your app first to connect it with HA in your pic there are a button (like a chain) right to the ELKBLE strip click it to connect/disconnect strip.

Now you can enable debug mode: https://github.com/dave-code-ruiz/elkbledom?tab=readme-ov-file#enable-debug-mode

And you can send me debug logs to know exact error you receive.

thanks

— Reply to this email directly, view it on GitHubhttps://github.com/dave-code-ruiz/elkbledom/issues/62#issuecomment-1963509919, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADAS4O27LRQZNKVDIGBBYODYVQ5VXAVCNFSM6AAAAABDCC5DCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRTGUYDSOJRHE. You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHubhttps://github.com/dave-code-ruiz/elkbledom/issues/62#issuecomment-1964125193, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BEBUFDFRBS5UHGOHFODMB63YVSDPJAVCNFSM6AAAAABDCC5DCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRUGEZDKMJZGM. You are receiving this because you authored the thread.Message ID: @.***>

[hbkhalil]

No I can't even add the integration Ibrahim El khalil Harrane.Institute of sound and vibration research ISVRUniversity of Southampton. -------- Original message --------From: Majikmonke @.> Date: 27/02/2024 09:52 (GMT+00:00) To: dave-code-ruiz/elkbledom @.> Cc: hbkhalil @.>, Comment @.> Subject: Re: [dave-code-ruiz/elkbledom] Bledom device not working (Issue #62) Hi

Still unable to connect with link broken

Can get past the connection screen to enable debugging.

Kind regards

Dan Scate

Sent from my Samsung Galaxy smartphone.

-------- Original message --------

From: hbkhalil @.***>

Date: 26/02/2024 13:17 (GMT+00:00)

To: dave-code-ruiz/elkbledom @.***>

Cc: Majikmonke @.>, Author @.>

Subject: Re: [dave-code-ruiz/elkbledom] Bledom device not working (Issue #62)

Logger: bluetooth_auto_recovery.recover

Source: config_entries.py:444

First occurred: 12:37:54 (55 occurrences)

Last logged: 13:15:15

• Could not determine the power state of the Bluetooth adapter hci0 [00:00:00:00:00:00] due to timeout after 5 seconds

• Bluetooth adapter hci0 [00:00:00:00:00:00] could not be reset:

---

From: Ibrahim Harrane @.***>

Sent: 26 February 2024 13:16

To: dave-code-ruiz/elkbledom @.***>

Subject: Re: [dave-code-ruiz/elkbledom] Bledom device not working (Issue #62)

Ok I tried to unlink it but I still get the same issue.

I tried to get the debug mode, but I don't think it is working. I think there is an issue with my Bluetooth adapter.

This what I am getting

---

From: Dave Code @.***>

Sent: 26 February 2024 07:55

To: dave-code-ruiz/elkbledom @.***>

Cc: hbkhalil @.>; Comment @.>

Subject: Re: [dave-code-ruiz/elkbledom] Bledom device not working (Issue #62)

Ok, first you need to know that bluetooth only support one client connected to strip, you need to disconnect your strip from your app first to connect it with HA in your pic there are a button (like a chain) right to the ELKBLE strip click it to connect/disconnect strip.

Now you can enable debug mode:

https://github.com/dave-code-ruiz/elkbledom?tab=readme-ov-file#enable-debug-mode

And you can send me debug logs to know exact error you receive.

thanks

—

Reply to this email directly, view it on GitHubhttps://github.com/dave-code-ruiz/elkbledom/issues/62#issuecomment-1963509919, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADAS4O27LRQZNKVDIGBBYODYVQ5VXAVCNFSM6AAAAABDCC5DCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRTGUYDSOJRHE.

You are receiving this because you commented.Message ID: @.***>

—

Reply to this email directly, view it on GitHubhttps://github.com/dave-code-ruiz/elkbledom/issues/62#issuecomment-1964125193, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BEBUFDFRBS5UHGOHFODMB63YVSDPJAVCNFSM6AAAAABDCC5DCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRUGEZDKMJZGM.

You are receiving this because you authored the thread.Message ID: @.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>

[dave-code-ruiz]

Could not determine the power state of the Bluetooth adapter hci0 [00:00:00:00:00:00]

Ok, you have problems with your bluetooth adapter , not a integration problem

[dave-code-ruiz]

Can get past the connection screen to enable debugging.

to enable debug mode follow instructions in:

https://github.com/dave-code-ruiz/elkbledom/?tab=readme-ov-file#enable-debug-mode

to show your log depends your system config, if it is docker, rpi, depends your HA version, etc..

I can show my log with:

docker logs -f homeassistant

[hbkhalil]

Yes it seems like it. U can close the issueIbrahim El khalil Harrane.Institute of sound and vibration research ISVRUniversity of Southampton. -------- Original message --------From: Dave Code @.> Date: 27/02/2024 10:18 (GMT+00:00) To: dave-code-ruiz/elkbledom @.> Cc: hbkhalil @.>, Comment @.> Subject: Re: [dave-code-ruiz/elkbledom] Bledom device not working (Issue #62)

Could not determine the power state of the Bluetooth adapter hci0 [00:00:00:00:00:00]

Ok, you have problems with your bluetooth adapter , not a integration problem

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>