Not working on Raspberry Pi 2 Model B

Hi,

The most common problem is a connection issue.

The pin header on the battery PCB is covered with a clear insulating lacquer (including inside the holes) so you'll need to remove this.

Ideally the best option is just to remove it mechanically with a fibreglass pencil and solder the wires to the pads to guarantee a good connection.

The errors you show are just "connection errors" so I can't debug any further than that - sorry.

Best wishes

David

On Sun, 14 Jan 2024, 05:24 ZX, @.***> wrote:

Hi David,

I have followed flashing-with-a-raspberry-pi-as-the-programmer with release v1.0.1 but not working. Here are the connection photos and error log:

IMG_3465.copy.jpg (view on web) https://github.com/davidmpye/V10_Dyson_BMS/assets/4977911/5dc1e333-cd44-4b58-872b-0384d5f822f3 IMG_3466.copy.jpg (view on web) https://github.com/davidmpye/V10_Dyson_BMS/assets/4977911/46b800bb-9deb-4bda-99ac-355d2da77306 IMG_3467.copy.jpg (view on web) https://github.com/davidmpye/V10_Dyson_BMS/assets/4977911/512ad023-4be9-485b-83fe-35048ebee67f

1 (comment)

https://github.com/davidmpye/V10_Dyson_BMS/issues/1#issuecomment-1750217872 I have tried replace V10_BMS.elf of this link. But not working.

I continuously clicked the black button, but it still didn't work.

— Reply to this email directly, view it on GitHub https://github.com/davidmpye/V10_Dyson_BMS/issues/6, or unsubscribe https://github.com/notifications/unsubscribe-auth/AARIHYNJ4R3TSMYBVOMUPWTYONTYFAVCNFSM6AAAAABBZ2Z2UWVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4DANJYHE3TQOA . You are receiving this because you are subscribed to this thread.Message ID: @.***>

davidmpye / V10_Dyson_BMS

Not working on Raspberry Pi 2 Model B #6

1 (comment)