Eagle Files?

[timmit99]

Is there a possibility of getting the Eagle design files for this board? I'm looking to make some parts that use it and the Eagle .brd and .sch would be very useful.

[dc42]

Hi Tim,

Which variant of the board are you referring to?

Cheers

David Crocker, Escher Technologies Ltd. http://www.eschertech.com Tel. +44 (0)20 8144 3265 or +44 (0)7977 211486

On 12/07/2018 18:00, Tim Abraham wrote:

Is there a possibility of getting the Eagle design files for this board? I'm looking to make some parts that use it and the Eagle .brd and .sch would be very useful.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/dc42/OrmerodSensorBoard/issues/3, or mute the thread https://github.com/notifications/unsubscribe-auth/ACmEbOj9R9GipnXNhBmAAtkJfz6i7ZFHks5uF4C-gaJpZM4VNYf7.

[timmit99]

I'm looking for the eagle files for the V1.2? i think which has the SMD components.

[tchleb]

Can you please add the eagle files for the Mini-differential-IR V1.2.

[3dle]

Can you please add the eagle files for the Mini-differential-IR V1.2.

[deHarro]

Hi David, @dc42, I recently created a version of your board for TH IR components I had on hands already.

The comrades asked for the Eagle files - I would be glad to share mine. Is this ok for you?

Harry

[dc42]

Yes, that's OK.

[deHarro]

Ok, let's hope, they come back here... ;-) Fine idea, by the way. I hope, my IR parts fit into the design.

Just curious... why don't you put your files into the repository?

Harry

[deHarro]

Here are my files, EAGLE V7.7

MiniLedSensor_Harry.zip

The IR parts are not of the correct types I have on hands, but the pads are ok. The EAGLE design settings (especially the clearance for GND plane) are so that I can "etch" the board with my CNC router.

Harry

[edit] sorry, made a mistake in the schematic (used resistor symbol as capacitor). Is fixed now.