search

dchote / talkiepi

The talkiepi project is for a truly headless mumble client for the Raspberry Pi, utilizing static config and GPIO for status LEDs and a button for push to talk
Mozilla Public License 2.0
268 stars 107 forks source link

Mic and alsa troubles on my Pi Zero #12

Open besi opened 4 years ago

besi commented 4 years ago

I am building a walky talky based on your wonder ful project

180E9542-4863-4454-8F4A-95479B2257F7

I was able to squish all the hardware into the laser-cut housing. I‘m thrilled that I got the playback to work. However, I‘m not yet able to speak to mumble.

I have a I2s Mic and DAC which work fine on their own. But for the mic I have to do the following for it to work, and I don‘t know how to translate this to your go-project (Also I‘m a more of a python guy, but you GOt me there) anyhow, this is how I use my mic on the command line:

arecord -D hw:0 -f SE_32 -r 22050 -V mono -c 2

Without these parameters the mic simply won‘t work.

So if you should have any idea or inkling on how I can get the mic working this would be wonderful.

Kind regards and thanks a bunch.

As a side note. I plan on releasing the plans and instructions soon on how I built my enclosure. It‘s written in openscad and uses a template from http://makercase.com/. I‘ll inform you once it‘s online.

besi commented 4 years ago

I also reached out to Stackoverflow with this issue.

krugerrc commented 3 years ago

Hi besi,

Have you been able to get this resolved? I'm basically sitting with the same issue (using an WM8960 Audio HAT instead, though).