Newbie alert. I'm trying to flash an UNO r.3 with hiduino. I keep getting an error message in terminal that it cannot find the arduino_midi.hex file
I'm on a MacBookPro if that matters
Is there somewhere specific I am supposed to place the Hiduino folder containing the firmware upon download?
This is line I am using to flash.
avrdude -p at90usb162 -P usb -c USBtiny -U flash:w:arduino_midi.hex -v -F
There may be other issues as well. I don't really know how to decipher the Terminal message. I've included the entire message below.
Thanks in advance for help. I'm new to all this.
avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "/usr/local/CrossPack-AVR-20131216/etc/avrdude.conf"
User configuration file is "/Users/terrydame/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : usb
Using Programmer : USBtiny
avrdude: usbdev_open(): Found USBtinyISP, bus:device: 001:008-1781-0c9f-ff-00
AVR Part : AT90USB162
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PC6
RESET disposition : possible i/o
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
avrdude: Device signature = 0x1e9489
avrdude: Expected signature for AT90USB162 is 1E 94 82
avrdude: safemode: lfuse reads as EF
avrdude: safemode: hfuse reads as D9
avrdude: safemode: efuse reads as F4
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: Using SCK period of 10 usec
avrdude: reading input file "arduino_midi.hex"
avrdude: error opening arduino_midi.hex: No such file or directory
avrdude: input file arduino_midi.hex auto detected as invalid format
avrdude: can't open input file arduino_midi.hex: No such file or directory
avrdude: read from file 'arduino_midi.hex' failed
avrdude: safemode: lfuse reads as EF
avrdude: safemode: hfuse reads as D9
avrdude: safemode: efuse reads as F4
avrdude: safemode: Fuses OK (H:F4, E:D9, L:EF)
arduino_midi.hex file is placed inside compiled_firmwares repository directory. You can download it and put it when you want. You should run the command in the directory you put the hex file.
Newbie alert. I'm trying to flash an UNO r.3 with hiduino. I keep getting an error message in terminal that it cannot find the arduino_midi.hex file I'm on a MacBookPro if that matters Is there somewhere specific I am supposed to place the Hiduino folder containing the firmware upon download? This is line I am using to flash. avrdude -p at90usb162 -P usb -c USBtiny -U flash:w:arduino_midi.hex -v -F
There may be other issues as well. I don't really know how to decipher the Terminal message. I've included the entire message below. Thanks in advance for help. I'm new to all this.
avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2009 Joerg Wunsch
avrdude: usbdev_open(): Found USBtinyISP, bus:device: 001:008-1781-0c9f-ff-00 AVR Part : AT90USB162 Chip Erase delay : 9000 us PAGEL : PD7 BS2 : PC6 RESET disposition : possible i/o RETRY pulse : SCK serial program mode : yes parallel program mode : yes Timeout : 200 StabDelay : 100 CmdexeDelay : 25 SyncLoops : 32 ByteDelay : 0 PollIndex : 3 PollValue : 0x53 Memory Detail :
avrdude: programmer operation not supported
avrdude: Using SCK period of 10 usec avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9489 avrdude: Expected signature for AT90USB162 is 1E 94 82 avrdude: safemode: lfuse reads as EF avrdude: safemode: hfuse reads as D9 avrdude: safemode: efuse reads as F4 avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed To disable this feature, specify the -D option. avrdude: erasing chip avrdude: Using SCK period of 10 usec avrdude: reading input file "arduino_midi.hex" avrdude: error opening arduino_midi.hex: No such file or directory avrdude: input file arduino_midi.hex auto detected as invalid format avrdude: can't open input file arduino_midi.hex: No such file or directory avrdude: read from file 'arduino_midi.hex' failed
avrdude: safemode: lfuse reads as EF avrdude: safemode: hfuse reads as D9 avrdude: safemode: efuse reads as F4 avrdude: safemode: Fuses OK (H:F4, E:D9, L:EF)
avrdude done. Thank you.
Terrys-MBP-9:~ terrydame$