Speaker of ipod touch 2 doesn't work (Siphon 2.1.0)

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Siphon-2.1.0-rc1.deb
2. ipod firmware 3.0
3.

What is the expected output? What do you see instead?

calls fail on first try with registration error
second try, they go through

after call is answered, no sound

What version of the product are you using? On what operating system?

Siphon-2.1.0-rc1.deb
ipod touch firmware 3.0

Please provide any additional information below.

Original issue reported on code.google.com by fono...@gmail.com on 3 Sep 2009 at 7:05

[GoogleCodeExporter]

ipod touch 1 or ipod touch 2?
Did you uninstall previous version ?
Did you go on settings ?
Could you reboot your ipod touch ?

Original comment by samuelv0...@gmail.com on 3 Sep 2009 at 7:19

[GoogleCodeExporter]

ipod touch v2, with firmware 3.0
I did uninstall previous version (which had the same issues)
tryed rebooting. no change

Original comment by fono...@gmail.com on 3 Sep 2009 at 7:30

[GoogleCodeExporter]

Could you try with you earphone ?
Connect earphone before run Siphon.

Original comment by samuelv0...@gmail.com on 3 Sep 2009 at 8:30

[GoogleCodeExporter]

I only have a mic and the built in speaker.

will try with the earphone/mic when I get one in a couple of days

BTW. how will the g729 work, will be built in and then the end user pays the 
license
somewhere ?

thanks

Original comment by fono...@gmail.com on 3 Sep 2009 at 8:50

[GoogleCodeExporter]

I reproduced your issue on my ipod touch 2.
It's weird because I think it worked before, and I didn't change anything on 
audio part.

g729 is not enabled by default.
I don't think users can pay license by themselves because 
  * Initial Fee: $15,000
  * <100K     $1.45
  * 100K-500K $1.30
  * ...
Perhaps, person/people could pay the initial fee, and after everybody should pay
little more than $1.45.

Original comment by samuelv0...@gmail.com on 3 Sep 2009 at 9:08

• Changed state: Accepted

[GoogleCodeExporter]

Original comment by samuelv0...@gmail.com on 3 Sep 2009 at 9:09

• Changed title: Speaker of ipod touch 2 doesn't work (Siphon 2.1.0)

[GoogleCodeExporter]

Could you enable log with detailled level ?
connect your micro
run Siphon
call (you should/could get registration error)
quit
open log.txt (written in /var/mobile/Library/Siphon)
find the line beginning with "iphonesound.c  Starting capture stream error 
XXXXX"
and send me the XXXXX error number 

Original comment by samuelv0...@gmail.com on 4 Sep 2009 at 12:51

[GoogleCodeExporter]

wait a minute!

I think my microphone plug was not fully connected. it is a microphone thumb 
tacks
micro-micophone for ipod touch 2g.

now it works ok, audio two way with the microphone and speaker on the ipod 
touch v2.

I guess if the microphone is misconnected it blocks both audio ways

sorry

Original comment by fono...@gmail.com on 5 Sep 2009 at 4:05

[GoogleCodeExporter]

Exactly I believe this is the problem.
I will add a test to verify if micro is connected or not.

Original comment by samuelv0...@gmail.com on 5 Sep 2009 at 8:22

[GoogleCodeExporter]

Issue 290 has been merged into this issue.

Original comment by samuelv0...@gmail.com on 5 Sep 2009 at 10:52

[GoogleCodeExporter]

Siphon verifies if microphone is connected before to phone.

Original comment by samuelv0...@gmail.com on 5 Sep 2009 at 11:00

• Changed state: Fixed

[GoogleCodeExporter]

one more detail with the micro-microphone.

when you click speakerphone, sound starts as soon as the call connects. but 
before
you can not hear the ringing. 

Original comment by fono...@gmail.com on 5 Sep 2009 at 11:04

[GoogleCodeExporter]

I just uploaded Siphon 2.1.0 rc2 on this site.
http://code.google.com/p/siphon/downloads/list

Original comment by samuelv0...@gmail.com on 5 Sep 2009 at 11:24