H.323 support

[GoogleCodeExporter]

Integrate mod_opal or similar to allow trunking IP with certain proprietary 
PBXs.

Original issue reported on code.google.com by c...@infotactix.com on 15 Feb 2011 at 11:18

[GoogleCodeExporter]

Original comment by markjcrane@gmail.com on 18 May 2011 at 1:27

• Added labels: Type-Enhancement

[GoogleCodeExporter]

once we get a stable release and get paid support and paid features out of the 
way we will look into implementing this item

Original comment by r.ne...@gmail.com on 2 Nov 2011 at 9:48

• Added labels: Priority-Low

[GoogleCodeExporter]

FusionPBX design makes it possible to integrate any FreeSWITCH module it may 
not be as easy without an easy interface but at least it is possible.

Original comment by markjcrane@gmail.com on 19 Dec 2013 at 10:22

• Changed state: Accepted

[GoogleCodeExporter]

I don't think it is worth the time and effort that would be required to 
implement this since there is a wider impact on FusionPBX PBX since it was 
built mainly for SIP.

From my experience I think the two best options you have of dealing with legacy 
H323 PBX system would be as follows:

1) Setup an H323 to SIP converter using Yate (Preferred) or Asterisk or even 
Freeswitch.  In this scenario the legacy H323 PBX will connect to the converter 
using H323 and FusionPBX also connects using SIP so the converter will do the 
H323 to SIP and SIP to H323 protocol conversion.

2) Connect an FXS SIP Gateway to the H323 PBX.  So the FXS ports connects to 
the H323 PBX side and the Gateway also connects to FusionPBX via SIP.

Original comment by ewsamu...@gmail.com on 19 Jul 2014 at 10:27

• Changed state: WontFix