derekperrin / rt-n56u

Automatically exported from code.google.com/p/rt-n56u
0 stars 0 forks source link

vpn connects - doesn't change IP #1170

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago
What steps will reproduce the problem?
1.connect to vpn in any mode

What is the expected output? What do you see instead?
a changed IP address - no change

What version of the product are you using? On what operating system?
3.4.3.7-072

Feb 24 19:09:21 xl2tpd[2034]: Using l2tp kernel support.
Feb 24 19:09:21 xl2tpd[2035]: xl2tpd version xl2tpd-1.3.1 started on RT-N56U 
PID:2035
Feb 24 19:09:21 xl2tpd[2035]: Connecting to host 
uk-london.privateinternetaccess.com, port 1701
Feb 24 19:09:23 xl2tpd[2035]: Connection established to 146.185.28.212, 1701.  
Local: 30877, Remote: 23683 (ref=0/0).
Feb 24 19:09:23 xl2tpd[2035]: Calling on tunnel 30877
Feb 24 19:09:23 xl2tpd[2035]: Call established with 146.185.28.212, Local: 
17845, Remote: 61435, Serial: 1 (ref=0/0)
Feb 24 19:09:23 pppd[2061]: Plugin pppol2tp.so loaded.
Feb 24 19:09:23 pppd[2061]: pppd 2.4.5 started by admin, uid 0
Feb 24 19:09:23 pppd[2061]: Using interface ppp5
Feb 24 19:09:23 pppd[2061]: Connect: ppp5 <--> l2tp (146.185.28.212)
Feb 24 19:09:23 pppd[2061]: Overriding mtu 1500 to 1450
Feb 24 19:09:23 pppd[2061]: Overriding mru 1500 to mtu value 1450
Feb 24 19:09:27 pppd[2061]: CHAP authentication succeeded
Feb 24 19:09:27 pppd[2061]: local  IP address 10.10.1.58
Feb 24 19:09:27 pppd[2061]: remote IP address 10.10.1.1
Feb 24 19:09:27 pppd[2061]: primary   DNS address 8.8.8.8
Feb 24 19:09:27 pppd[2061]: secondary DNS address 8.8.4.4
Feb 24 19:11:25 xl2tpd[2035]: death_handler: Fatal signal 15 received
Feb 24 19:11:25 xl2tpd[2035]: Connection 23683 closed to 146.185.28.212, port 
1701 (Server closing)
Feb 24 19:11:25 pppd[2061]: Terminating on signal 15
Feb 24 19:11:25 pppd[2061]: Connect time 2.0 minutes.
Feb 24 19:11:25 pppd[2061]: Sent 0 bytes, received 0 bytes.
Feb 24 19:11:25 pppd[2061]: Overriding mtu 1500 to 1450
Feb 24 19:11:25 pppd[2061]: Overriding mru 1500 to mtu value 1450
Feb 24 19:11:25 pppd[2061]: Connection terminated.
Feb 24 19:11:25 pppd[2061]: Exit.
Feb 24 19:23:48 pppd[2145]: Plugin pptp.so loaded.
Feb 24 19:23:48 pppd[2145]: PPTP plugin version 0.8.5 compiled for pppd-2.4.5
Feb 24 19:23:48 pppd[2146]: pppd 2.4.5 started by admin, uid 0
Feb 24 19:23:49 pppd[2146]: Using interface ppp5
Feb 24 19:23:49 pppd[2146]: Connect: ppp5 <--> pptp (146.185.18.114)
Feb 24 19:23:50 pppd[2146]: CHAP authentication succeeded
Feb 24 19:23:50 pppd[2146]: MPPE 128-bit stateless compression enabled
Feb 24 19:23:50 pppd[2146]: local  IP address 10.1.1.13
Feb 24 19:23:50 pppd[2146]: remote IP address 10.1.1.1
Feb 24 19:23:50 pppd[2146]: primary   DNS address 8.8.8.8
Feb 24 19:23:50 pppd[2146]: secondary DNS address 8.8.4.4
Feb 24 19:23:50 dnsmasq[1382]: read /etc/hosts - 3 addresses
Feb 24 19:23:50 dnsmasq[1382]: read /etc/storage/dnsmasq/hosts - 0 addresses
Feb 24 19:23:50 dnsmasq[1382]: using nameserver 75.75.76.76#53
Feb 24 19:23:50 dnsmasq[1382]: using nameserver 75.75.75.75#53
Feb 24 19:23:50 dnsmasq[1382]: using nameserver 8.8.4.4#53
Feb 24 19:23:50 dnsmasq[1382]: using nameserver 8.8.8.8#53
Feb 24 19:24:40 RT-N56U: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload 
[WAN]<->[LAN/WLAN]
Feb 24 19:24:40 RT-N56U: Hardware NAT/Routing: IPv4 UDP flow offload - OFF
Feb 24 19:24:40 RT-N56U: Hardware NAT/Routing: IPv6 routes offload - OFF
Feb 24 19:25:12 pppd[2146]: Terminating on signal 15
Feb 24 19:25:12 pppd[2146]: Connect time 1.4 minutes.
Feb 24 19:25:12 pppd[2146]: Sent 0 bytes, received 0 bytes.
Feb 24 19:25:12 pppd[2146]: MPPE disabled
Feb 24 19:25:12 dnsmasq[1382]: read /etc/hosts - 3 addresses
Feb 24 19:25:12 dnsmasq[1382]: read /etc/storage/dnsmasq/hosts - 0 addresses
Feb 24 19:25:12 dnsmasq[1382]: using nameserver 75.75.76.76#53
Feb 24 19:25:12 dnsmasq[1382]: using nameserver 75.75.75.75#53

It says it connects, but I cant get my IP address to change unless I connect 
directly with a VPN client on a computer. 

Original issue reported on code.google.com by mtwel...@gmail.com on 25 Feb 2014 at 12:38

GoogleCodeExporter commented 9 years ago
same problem here...

Original comment by ferg.us....@gmail.com on 10 Apr 2014 at 9:49