Open GoogleCodeExporter opened 9 years ago
Head over to "WAN - Internet Connection".
Choose which port you intend to use for IPTV, and enable vlan tagging.
You should be fine w.o. setting a value (VID) for internet. Proceed to set the
desired VID (2?) to your newly claimed IPTV-port. Untag that port also.
Don't go messing with the prio-setting.
/Kitch
Original comment by kitch2400
on 30 Jul 2014 at 2:47
[deleted comment]
Kitch,
I try to follow your instructions.
1st. Assign LAN1 port to IPTV STB Port, but when I try to put VID2 for the new
port all the time appear the same problem. Please check the links with
screenshot.
No way to assign VID2 over any VLAN.
Thanks again for your help
regards
https://docs.google.com/document/d/1aexg7A9waPFhu9qAiWlCycKsif9iJkjY2mG3H41GDDY/
edit?usp=sharing
https://docs.google.com/document/d/1sQb_rKjl4oon28VFjn7gAb0jrBeg8RZkmojQTFnsdvY/
edit?usp=sharing
Original comment by emante...@gmail.com
on 31 Jul 2014 at 9:17
Shameful quality of the screenshots, sir.
After a short review of my own settings I see that I may have misinformed you.
Assign the same vlan id to both VLAN CPU (IPTV) and vlan lan1.
/Kitch
Original comment by kitch2400
on 1 Aug 2014 at 5:24
Kitch,
Thanks again for your help, still don't work.
I put the same value over VID (value:2).
After apply the changes the error continues.
Please check the new screen shots.
Regards
https://docs.google.com/document/d/15OPIbxpjJaEuQm7KdE5-gAGpAqTJFjzjuN5Sy3mY6Y8/
edit?usp=sharing
https://docs.google.com/document/d/1oQ-uoi5T5iW9ia-3R-_ySEA_gTBpG4NGFtRe8tmAEGo/
edit?usp=sharing
Original comment by emante...@gmail.com
on 2 Aug 2014 at 4:30
I'll try to reproduce the issue you describe when I'm back home.
/Kitch
Original comment by kitch2400
on 3 Aug 2014 at 2:33
[deleted comment]
Hi! Is there any solution now? I have RT-N65U instead, but I have exactly the
same issue than emante.
The main problem is that the firmware only allow us to change the value for the
vlan's VID between 4 and 4094, but with our ISP (Movistar, Spain) the value
should be 2. If not, the IPTV decoder doesnt work at all. For Internet it is
not a problem because the value is 6.
With the Asus' firmwares it can be changed to 2 (or 3 for the VoIP, but we dont
need it). So, maybe it is only a small bug concerning to the integer value for
the input??
Thank you very much in advance, the firmware is almost perfect (for example,
with the official firm, even changing correct values for vlans it is not able
to anything, internet or IPTV).
Best regards!
Original comment by juanjose...@gmail.com
on 20 Nov 2014 at 1:08
[deleted comment]
I made it work with Movistar. You have to change line 2196 in file
/opt/rt-n56u/trunk/user/httpd/web_ex.c from:
int min_vlan_ext = 3;
to
int min_vlan_ext = 2;
Build the firmware and change settings in IPTV page:
VLAN CPU (Internet): VID 6 PRIO 0
VLAN CPU (IPTV): VID (blank) PRIO 0 Zeroconf
VLAN LAN4: VID 2 PRIO 4 Untag (Checked)
And follow the instructions to configure the decoder in
http://www.redeszone.net/2014/06/10/como-configurar-iptv-movistar-tv-del-ftth-de
-movistar-utilizando-routers-asus/
Everything works, including VoD. :)
Original comment by aluisper...@gmail.com
on 19 Mar 2015 at 1:52
aluisoe,
I follow your instructions and change the line over file web_ex.c. Save
correctly, but when I try to recompile with this instructions
"http://code.google.com/p/rt-n56u/wiki/HowToMakeFirmware", I don't find the
.trx file. Can you help me, and tell me how to obtain this .trx file. (o maybe
contact with me on emantecon (arroba) gmail (dot) com... arroba is in Spanish
:) )
Regards
Original comment by emante...@gmail.com
on 21 Mar 2015 at 9:16
Any chance the developers will fix this issue with vlan 2? its annoying because
i need the vlan 2 for internet connection.
Original comment by alejo...@gmail.com
on 25 Apr 2015 at 5:46
Original issue reported on code.google.com by
emante...@gmail.com
on 28 Jul 2014 at 7:51